A single toilet line item looks like the easiest decision on a bathroom schedule until it arrives on site and the drain is in the wrong place. For buyers specifying washdown one piece toilet 1004A, modern ceramic bathroom toilet for villas, guest rooms or public restrooms, the questions below are the ones that decide whether the order fits the drawings, the plumbing and the maintenance routine. They come from our own production and project experience, so treat them as a checklist to run past your designer, plumber and supplier.
1. Which drain outlet does the room actually have?
This is the question that causes the most rework. The 1004A is offered with two plumbing arrangements: a P-trap wall drain with a 180 mm rough-in, and an S-trap floor drain with a 250 mm rough-in. A wall outlet and a floor outlet are not interchangeable on site without moving pipework, so confirm which one the room has before you place the order — and confirm it against the as-built condition, not the original drawing, on renovation work.
When you send an enquiry, state the outlet type and the measured rough-in distance for each bathroom, room by room. On mixed projects, guest bathrooms and main bathrooms often differ, and a single blanket specification is where mistakes start. If your project has both layouts, order both configurations in one shipment rather than running two separate orders.
2. One piece or two piece — what changes on site?
The 1004A is a one-piece unit: tank and bowl are integrated, so there is no seam between them for dirt and bacteria to collect in. On a hospitality or rental schedule that means fewer dead corners for housekeeping to scrub and a cleaner appearance after years of public use. If your specification allows a two-piece body instead, compare it against the two piece washdown toilet 1038A, which is built for projects that need flexible S-trap and P-trap choices in a separate-tank format. Decide on the body type first, then worry about the model number.
3. Is the flushing method suited to how the room is used?
The 1004A uses a washdown flushing mechanism: strong cleaning performance with good water efficiency, which suits rooms that are flushed repeatedly through the day — hotel guest bathrooms, staff restrooms, apartment common areas. Ask your supplier to state the flushing arrangement in writing on the quotation rather than leaving it to the product name, and match it to the room's duty level. A restroom used by a handful of residents has different demands from one serving a banquet floor.
4. What is the ceramic body and glaze made of?
Ask for the material specification, not adjectives. The 1004A is made from vitreous ceramic with a dense glossy glaze, which resists stains, limescale and yellowing — the three things that make a white toilet look old long before it actually fails. In hard-water areas, ask specifically how the glaze behaves against limescale and what cleaning agents the maintenance team should avoid. A glaze question answered now saves a replacement budget line later.
5. Does it match the rest of the bathroom suite?
Toilet bowls bought in isolation often clash with basins bought separately from a different range. The 1004A sits inside a matched sanitary series, so you can specify the freestanding ceramic pedestal basin 1004S and the wall hung ceramic basin 1004B alongside it, keeping silhouette, glaze tone and detailing consistent across every bathroom in the building. If your project needs a wall-mounted WC instead, look at wall hung toilet 1051W from our range and confirm that the concealed cistern frame is included in the same order.
Practical note: sizes and plumbing rough-in details should always be checked against the current technical data sheet before you issue an order. Drawings change between production runs, and a specification written from memory is not a substitute for the sheet your installer will work from.
6. How are quantities, spares and packaging handled?
For project buyers, the commercial questions matter as much as the technical ones. Ask your supplier:
- What is the minimum order quantity for this model, and can it be mixed with other items in one container?
- Are spare flushing components and seat fixings available for the same model years after delivery?
- How are the ceramics packed for ocean freight, and what damage claim process applies on arrival?
- Which documents come with the shipment — commercial invoice, packing list, certificate of origin?
We handle ceramic sanitary ware alongside the rest of the fit-out, so a bathroom order can travel with bathroom sanitary fixtures, cabinetry, lighting and finishes in one coordinated delivery instead of four separate consignments arriving on four different dates.
7. Who coordinates the order from sample to handover?
Ceramics are rarely a stand-alone purchase on a villa or hotel project. If your supplier also handles joinery, flooring and fixtures, ask who owns coordination between them: one contact who tracks production stages across categories is worth more than the lowest unit price on a single item. Our turnkey interior project solutions run that way — consultation, design and planning, production, logistics, installation and after-sales under one workflow, with door-to-door delivery arranged from our side.
Questions to send with your enquiry
Before you request a quotation for the 1004A, gather four facts: outlet type and measured rough-in per bathroom; quantity by room type; glaze and cleaning requirements for the local water condition; and the delivery location with import terms. With those in hand, a supplier can quote the right configuration instead of guessing — and you avoid the most expensive outcome in sanitary ware procurement, which is a container of correct toilets that cannot be installed.
Quick answers
Can the 1004A fit both wall and floor drains?
Yes, but not one unit doing both. Order the P-trap wall-drain version (180 mm rough-in) or the S-trap floor-drain version (250 mm rough-in) according to each room's existing outlet.
Is a one-piece toilet harder to install than a two-piece?
The fixing principle is the same: set to the drain outlet, connect the water supply, seal the base. The difference is handling — a one-piece unit is a single heavier body, so plan for two people on installation day.
Can I order basins and toilets together in one project shipment?
Yes. The 1004 series includes matching basins, and ceramics can be consolidated with other fit-out categories into a single coordinated delivery.
What should I check before the shipment is produced?
The current technical data sheet for model name, dimensions and rough-in; the outlet type per bathroom; and the quantity split by room. Confirm all three in writing against the quotation.