A shaker panel wardrobe is a made-to-measure item. The doors, carcass and interior fittings are cut to your room, so the piece cannot simply be swapped off a shelf if something goes wrong on site. That is exactly why experienced buyers spend more time on the after-sales section of the contract than on the door profile. Before you confirm an order for built-in furniture such as our built-in furniture range, here is what to put in writing.

1. Which measurements are covered if the on-site dimensions differ

Made-to-measure wardrobes are produced from a dimension set that someone has to take and sign off. Ask who measured the opening, whether a second survey is carried out before production starts, and what happens when the finished walls, screed or floor finish move the numbers by a few millimetres. A practical supplier will state which party re-measures on site, at what stage the dimensions are frozen, and how a correction is handled — refabrication of a single door, an on-site scribe adjustment, or a filler panel. Get that answer in writing, because the cost difference between a scribed trim and a rebuilt carcass is large.

2. What exactly the warranty covers, and for how long

Warranty wording on built-in joinery is usually split into layers, and buyers often only read the first one. Ask separately about:

  • the carcass and structural panels — substrate stability, edge banding, joint integrity;
  • the door fronts — the finish you specified, whether lacquer, melamine, acrylic or veneer, including colour match for a replacement front;
  • hardware — hinges, slides, handles, soft-close mechanisms and any integrated lighting transformer;
  • the installation work itself, if the supplier's team fits the unit.

For each layer, ask three things: the duration, what starts the clock (shipment date, delivery date or handover date), and what is excluded. Site moisture, premature wet cleaning and undocumented site damage are common exclusions that buyers only discover after a claim.

3. How spare parts are supplied for a paneled door

A shaker-style door has a frame and a centre panel, so an ordered replacement is rarely one part. Ask whether the supplier stocks or can re-manufacture individual components — a single door leaf, a panel, a hinge plate, a drawer front matched to the original batch — and how long that capability lasts after the project is handed over. Panel colours drift between production batches, so it is worth asking for the exact finish code, batch reference and any approved sample to be recorded on your project file at order confirmation. If you later extend the same design across other bedrooms, that record is what makes a colour-matched addition possible.

4. Who answers the query, in what language, and how fast

Ask for a named contact rather than a shared inbox, and confirm the working hours difference between your site and the factory. Then ask about the escalation path: who responds when a component arrives damaged, who authorises a replacement shipment, and what turnaround is aimed for from the moment you send photographs and the item reference. Our Furniture Installation and After-sales Support service covers on-site installation, inspection and snag lists, warranty handling, spare parts and replacement, plus ongoing maintenance — so the same coordination sits with one team from production through to handover.

5. How delivery damage is separated from manufacturing defects

Wardrobe panels are long, flat and heavy, which makes transit the most likely point of injury. Ask how the panels are packed, whether corners are protected and how cartons are numbered against a packing list keyed to each elevation drawing. Then agree the inspection routine: what you photograph on arrival, how quickly damage must be reported, and how a transit claim differs from a manufacturing claim in paperwork terms. Buyers who unpack in the sequence of the packing list and check each elevation before signing resolve most issues without any claim at all.

6. What happens after installation: snagging and adjustment

Hinged doors on a paneled wardrobe need alignment, and that work belongs to the handover stage. Ask what is included in the post-installation inspection — door alignment, drawer run-out, soft-close function, how the unit sits against an uneven floor or ceiling line — and whether a follow-up adjustment visit is offered after the building has been occupied for a while, when humidity changes settle the fit. If your project also includes kitchen cabinetry or other joinery in the same finish, ask whether one team handles all of it, so snag lists stay in one place instead of three.

7. What documentation you should keep on file

After-sales support moves faster when the paperwork is already there. Before production starts, collect: the signed elevation drawings with dimensions, the finish and material schedule with codes, the hardware specification with brand and model references, the packing list mapping cartons to elevations, and the correspondence in which any deviation was agreed. Keep those documents for the life of the warranty period, not just until handover.

A short pre-order checklist

  • Who measures, who signs off the dimensions, and what happens if they change?
  • Warranty duration for carcass, doors, hardware and installation — and what starts the clock?
  • Can single replacement parts be re-manufactured later, and for how long?
  • Named contact, response window, and the escalation route for a damaged component.
  • Packing standard, arrival inspection routine and transit-claim paperwork.
  • Post-installation snagging and whether later re-adjustment is included.

If you want these answers in writing before you commit, send us the drawings or a rough layout of the room. As an one-stop furniture and building materials supplier, we handle the specification, production, logistics and after-sales side of built-in joinery under one coordination team, so warranty and spare-part questions do not get passed between vendors. Tell us the wardrobe run, the finish you have in mind and your site location, and we will confirm the scope, the fit-out sequence and exactly what our support covers for that project.