A matte lacquer wardrobe looks identical on two quotations and completely different once it is installed. The difference almost never shows up in the product name — it shows up in the sample door and in the line-by-line detail of the proposal. If you are specifying built-in wardrobes for a villa, apartment or hotel room package, comparing those two things properly is what protects your budget and your handover date.

1. Ask for the same reference, not just a finish name

Suppliers describe matte lacquer in loose ways: "matte", "soft touch", "anti-fingerprint matte", "silk matte". Those words are not specifications. Before you compare anything, ask each supplier to state what is actually being quoted — the substrate, the lacquer system and the number of coating passes — and then request a physical sample door in that stated build.

Our Matte Lacquer Wardrobes are made to measure, with the finish, layout and dimensions specified per project, so a sample is always produced against your confirmed specification rather than a generic catalogue swatch. That is the version worth comparing.

2. Judge the sample under conditions you will actually live with

  • Lighting. Check the sample in daylight, under warm LED and under a bedroom downlight. Matte sheen reads differently at every colour temperature, and a tone that looks neutral in the showroom can pull grey or green on site.
  • Angle. View the panel at 15°, 45° and straight on. Wave and orange-peel texture hide at normal viewing distance and appear the moment light rakes across the surface.
  • Edge. Look at the door edge and any routed detail. A flat field can be flawless while the edge shows build lines or a lighter tone — the most common complaint after installation.
  • Contact. Run a fingertip across it and then look for the mark. Matte lacquer is chosen for a soft, low-glare surface; how it behaves under handling tells you more than any data sheet.
  • Match to neighbours. Put the sample against your wall panel, door and flooring selections. Wardrobe doors are judged side by side with the rest of the joinery, not on their own.

3. Read the proposal for what is missing

Two quotations for "matte lacquer wardrobe, 4 doors" can differ by a wide margin and still both be honest, because they include different things. Before you compare prices, put each offer into the same columns:

ItemWhat to confirm in writing
Scope of supplyDoors and carcass only, or doors, carcass, back panels, plinth and scribes.
Internal fit-outHanging rails, shelves, drawers, soft-close fittings and any lighting — priced per unit or "as shown".
Measurement methodWho measures, when, and what happens if the on-site dimension differs from the drawing.
Finish referenceSample number, sheen level and colour standard the production unit is contractually tied to.
Tolerance handlingHow out-of-plumb walls and uneven floors are scribed or packed.
Delivery termsPort, door-to-door, packaging, container loading and who handles customs clearance.
After the saleSnag list process, spare panels and replacement parts availability.

A lower price that excludes scribing, drawer boxes or door-to-door freight is not a lower price. Normalise the scope first, then compare.

4. Compare how each supplier handles variation

Ask both suppliers the same three questions and note how quickly the answers come back:

  • Can you produce a sample door before the full order, and what does it cost and take?
  • If the wall is 15 mm out of plumb, how is the unit adjusted — on site or in the workshop?
  • If one door is damaged in transit, how fast is a replacement made to the same batch reference?

Suppliers who answer these with a defined process are usually easier to work with at handover than suppliers who answer with a lower number. Our Custom & OEM Service covers bespoke finishes and prototyping against confirmed drawings, and our Turnkey Interior Project Solutions workflow runs from design and production through logistics to installation support, which keeps the wardrobe, the wall panelling and the doors on one coordinated specification instead of three separate ones.

5. A short pre-order checklist

  • Sample door approved in writing, with sheen level and colour reference recorded.
  • Final dimensions signed off from an on-site measurement, not a drawing dimension.
  • Internal layout drawn per wardrobe, matched to how the room is actually used.
  • Fittings named by brand and type, including soft-close and hinge specification.
  • Delivery terms, packaging standard and replacement-part route agreed before production starts.

Compare samples on the same surface and compare proposals on the same scope. Do that once, and the decision between two matte lacquer wardrobe quotes stops being guesswork.

Send us your drawings, room dimensions and finish reference and we will quote against the same scope you gave your other suppliers — contact SANTERSON.