A glass partition looks simple on a mood board and complicated on a purchase order. The panel itself is only part of the cost: framing, hardware, opening mechanism, tolerances on site and who actually installs it all change the final number. Before you compare quotations, work through the five decisions below, because most price differences between suppliers come from scope gaps rather than from glass.

1. Decide what the partition has to do before you choose a system

Write down the job in one sentence per location: separate a wet area, screen off a study corner, divide a suite, or close an existing opening without losing daylight. That sentence determines the system, not the other way round. A fixed screen between two rooms and an operable divider that you fold away at dinner are completely different products with different hardware, lead times and installation crews.

In our glass partitions range, sizing, finish and layout are all specified per project rather than chosen from a fixed catalogue width. That is normal for made-to-measure work: the drawing drives the price, so send the quotation request with room dimensions, opening heights and the interface conditions (floor, ceiling, adjacent wall) already marked.

2. Match the operating type to the traffic it will see

Three configurations cover most residential and hospitality projects:

  • Fixed panels with a framed or frameless detail. Fewest moving parts, lowest maintenance, but every service access has to be planned in advance.
  • Sliding panels on a track. Useful where an opening needs to close at night and disappear by day. Ask early whether the track is ceiling-mounted or floor-recessed, because that affects floor finishes and threshold heights.
  • Pocket or bypass arrangements. Panels disappear into a wall cavity — but only if the cavity depth and headroom exist before the partition goes in.

Where an opening needs to change size on a schedule, look at partition sliding systems and confirm the track, hardware and clear opening dimensions for your own drawing. A supplier who quotes without asking for those three numbers is quoting something other than what you are picturing.

3. Put the specification in writing — glass type, frame, hardware, finish

Ask every bidder to answer the same four items in their written quotation, not just a price:

Item to confirmWhy it changes the price and the result
Glass type and safety requirementDetermines panel weight, the load the frame and track must carry, and what the installer can safely handle on site.
Frame material and finishAnodised, powder-coated or wood-matched frames are priced differently and must be matched to doors and joinery already specified in the project.
Hardware: track, rollers, handles, locksOften excluded from a low quotation and added later as a variation. Ask for hardware to be listed by name.
Made-to-measure tolerancesFloor levels and ceiling heights rarely match the drawing. Agree who measures on site and who carries the adjustment cost.

Configurable listings on supplier websites usually carry limited technical detail on purpose. Treat the product page as a starting point, then confirm glass type, safety requirement, hardware and dimensions for your specific project before you sign anything.

4. Check whether one supplier can deliver the surrounding work

A partition rarely stands alone. It meets a wall finish, a floor finish, sometimes a door opening and often built-in joinery. When those are bought from four different vendors, the gaps between them become your problem: who fills the junction, who protects the glass during other trades' work, who returns for the snags.

This is where a combined supplier saves coordination time rather than unit cost. Wall panel systems, wood panel partitions and integrated door-and-paneling details can be specified against the same drawings as the glazing, so one production run covers the whole wall. SANTERSON has been manufacturing furniture and building materials since 2008 and works on villa, hospitality and office projects, with custom/OEM production, door-to-door logistics, installation support and after-sales service under one coordination team — useful when partitions, joinery and finishes have to arrive on the same site in the same window.

5. Compare total delivered cost, not the panel price

Build a simple line-item sheet for each quotation:

    Panel and framing  |  Hardware set  |  On-site measuring  |  Packaging and freight to site  |  Customs handling  |  Installation labour  |  Snag rectification  |  Spares

For imported work, also confirm the delivery term (who pays freight and duty), what documents come with the shipment, and how panels are crated. Glass travelling in mixed containers needs dedicated loading; a quotation that ignores packaging is hiding a breakage risk you will pay for later.

A quick pre-order checklist

Before the order is placed:

  • Signed dimension drawing with levels, opening widths and head heights
  • Glass type and safety requirement agreed in writing for each location
  • Hardware schedule (track, rollers, handles, locks) named on the quotation
  • Finish samples matched to existing doors, joinery and wall panels
  • Written scope: measuring, freight term, installation, snag list, spares

Common buying mistakes worth avoiding

  • Buying to nominal sizes. Site dimensions differ from architectural drawings; made-to-measure work should be verified on site before production starts.
  • Ignoring the cavity and headroom. Pocket and sliding details need space that often does not exist once floors and ceilings are finished.
  • Choosing the finish last. Frame colour has to match joinery and door frames specified elsewhere; late changes delay production.
  • Treating after-sales as optional. Ask what happens if a panel is damaged on site and how replacement panels are matched later.

If you want a second opinion on a drawing, or need partitions produced together with joinery, wall panelling and other fit-out items, send us the dimensions and finish references and we will quote the scope as one package.

SANTERSON — furniture and building materials manufacturer
Contact: PHILLIP  |  Phone / WhatsApp: +86-13928214007  |  Email: santerson@qq.com
Enquiries: https://www.santerson.com/contact/