A swim spa of this size rarely fails at the point of installation. It fails in the paperwork before that: one omitted accessory, one pump ordered as a spare that was already included, one electrical specification confirmed too late. The following planning method is built around Outdoor Swim Spa WS-S10-T, a 10-metre configurable swim and hydrotherapy unit, and it applies the same way whether you are specifying a single villa backyard or a set of units across a resort.

Start With the Catalogued Configuration, Not the Model Name

WS-S10-T sits inside our configurable outdoor swim and hydrotherapy range. The catalog entry for this model lists a shell of 10000 × 2200 × 1420 mm, one control system, one swim training system, two water pumps, one filter pump, a jet total of 76 pieces, LED lighting with 40 small LED lights, and a total power figure of 7.65 kW, with water jets, LED lighting, ozone and a swim training system shown as the featured functions.

Treat those lines as the baseline you negotiate against, not as an order confirmation. Included equipment and electrical requirements depend on the configuration finally selected, and the same shell can be specified with different accessory sets. Write your bill of materials in two columns: what the catalogued model already carries, and what you are adding.

Build the Bill of Materials in Three Layers

Splitting the order into layers stops the most common duplication error, where a buyer adds a water pump as a spare when two pumps are already part of the base specification.

LayerWhat it coversTypical quantity questions
Base unitShell, control system, swim training system, water pumps, filter pump, jets, LED lighting as catalogued for WS-S10-THow many shells on site? Is each unit the same configuration or does each location need a different spec?
Options and accessoriesCatalog-listed options include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and stepsWhich options are per unit and which can be shared? Availability and compatibility vary by model.
Site-side itemsFoundation and support structure, power supply and protection, access for delivery, drainage, surrounding paving and landscapingWho supplies each item — the spa supplier, the civil contractor or the client's own trades?

For options, do not assume that an accessory offered for one model in the range fits another. Heat pumps, sand filtration and UV sterilization are listed across the range, but their availability and compatibility vary by model, so confirm each option against your selected configuration before the order is placed.

Count Units Against the Programme, Not Against the Site Plan

The quantity question is rarely "how many spas fit on this plot". It is "how many hours of use does each unit have to carry". A resort with 120 keys and a spa that guests book in sessions needs a different count from a villa with one family, even if both sites have the same outdoor area.

  • Map daily peak demand: number of users, session length, and whether use is booked or open access.
  • Check whether the swim training system is a shared amenity that concentrates demand on one unit, or whether each unit needs its own.
  • Decide early which units carry the full option set — heat pumps and insulation matter most where water temperature has to hold across seasons — and which can be specified leaner.
  • Leave a spare-parts position for consumables and wear items rather than a second complete pump set, unless your maintenance plan justifies it.

Coordinate the Adjacent Products Before Production Starts

A swim spa is delivered into an outdoor room that also needs paving, lounging furniture, screening and lighting. Ordering those separately is where projects lose weeks, because each package arrives on its own schedule and none of them can be finished until the others are in place.

Within our range we supply Swimming Pools and Swim Spas alongside Outdoor Furniture for Villas and Resorts, so poolside loungers, dining sets and the spa itself can be specified against one set of drawings and shipped on one coordinated schedule. If you are weighing a longer layout with a separate relaxation zone, Long Outdoor Swim Spa with Hydrotherapy & Relaxation Pool is the comparison point; for a compact spa-only position, compare against Outdoor Swim Spa WS-S10, which shares the same catalogued shell dimensions but does not list a swim training system in its captured specifications.

The practical test for coordination is a single combined schedule: production slot, packing and container loading, delivery date, crane or access requirements, installation window, and commissioning. If any adjacent package is not on that sheet, it will arrive as an orphan.

Confirm the Technical Sheet in Writing

Before production: total connected load and how it compares with the supply available on site; circuit protection and earthing as required by your local electrical authority; water supply, drainage and fill strategy; access route for a 10-metre shell including turning radii and gate widths; foundation loading confirmed by your structural engineer.

Power is the item most often discovered late. The catalogued total power figure for WS-S10-T is what you brief your electrical designer with — it is not a substitute for their calculation, and adding heat pumps or other options changes the load. Bring the accessory list and the electrical question into the same conversation.

How Our Process Handles This

For projects where the spa has to be coordinated with other fit-out packages, our Turnkey Solutions service runs consultation, design and planning, production, logistics, installation and after-sales as one sequence. Where you want to change finishes, materials or dimensions to match an existing design language, Custom & OEM Service covers bespoke material finishes and textures alongside OEM manufacturing. Freight is handled through Logistics & Door-to-Door Delivery, which covers freight forwarding by sea, air and rail, packaging and container loading, customs paperwork and shipment tracking.

Import terms, duties, Incoterms, insurance coverage and transit time are settled per project rather than quoted as a blanket service level, so we confirm those with you against the actual destination and delivery scope.

A Short Checklist

  • Base specification for WS-S10-T copied into the order, line by line, not summarised.
  • Every option confirmed as available and compatible with this model.
  • Site-side scope divided between supplier and contractor in writing.
  • Adjacent outdoor furniture and finishes on the same delivery schedule.
  • Electrical, foundation and access constraints signed off before production opens.
Send us the site drawings, the number of units you are considering and the options you want, and we will return a configuration sheet for Outdoor Swim Spa WS-S10-T with each accessory confirmed against the selected model. You can reach us through the contact page.