Grey minimalist cabinets look effortless on paper: flat panels, no fussy mouldings, one quiet neutral tone across the whole run. That is exactly why an enquiry that sounds complete in an email can turn into three weeks of back-and-forth once a factory tries to price it. A quotation for this style depends on dimensions, substrate, door construction and hardware — none of which the words "grey, minimalist" actually define.
Before you write to a furniture and building materials supplier, it helps to know which missing detail changes what. The list below is ordered by how much each item moves the number at the end of the quotation.
1. A measured layout, not a mood board
Send the drawing you would hand a local cabinetmaker: overall wall lengths, run heights and depths, plus the positions of windows, doors, switches, extract ducting, water supply and waste. Note floor-to-ceiling height at its highest and lowest points, because slab levels in refurbished buildings are rarely level across a five-metre run.
Mark the three things that decide cabinet cost faster than finishes do: tall units, appliance housings and corners. One bank of full-height pantry or oven housing changes panel quantities and structural requirements more than switching from one grey to another. Attach any design intent drawing you already have — but label it as intent, so the supplier knows which dimensions are still open.
2. The grey, stated properly
"Grey" covers several hundred shades and at least four surface behaviours. Specify two things together: a reference (a RAL or Pantone code, a physical sample you can post, or a panel you want matched) and the finish behaviour you expect — matte, silk, high gloss, textured, wood-grain effect.
The same tone reads differently on a handleless flat door than on a framed shaker profile, and differently again between an acrylic surface and a grey matte board. Where the tone has to continue into wardrobes, media walls or vanity units elsewhere in the project, say so at enquiry stage rather than after production: matching a colour across two product families is a manufacturing decision, not a paint decision.
3. Panel material and door construction
This is the question suppliers ask first and buyers answer last. State what the panel has to do, and let the factory propose the build-up:
- Flat slab fronts with no visible handle — a stable board with a two-sided surface; flatness over tall door heights is the thing to question.
- Shaker or framed profiles in grey — profile-matched fronts rather than one wrapped sheet, which affects both price and production time.
- Wet and humid zones — laundry, pantry beside a kettle, coastal apartments; ask which board and edge treatment is used there.
- Contract use — serviced apartments, holiday-let villas, boutique hotels; state the traffic level so hardware and edges are specified accordingly.
Our Grey Minimalist Cabinets belong to a collection built on made-to-measure sizing, selectable materials and finishes, and a layout drawn to the individual space — which is also the information we need back before a price can be given.
4. Storage plan and opening method
Decide what goes into each run before asking for prices: dry goods, small appliances you want hidden behind doors, recycling separation, deep pots, a microwave housing, bottle storage. That drives interior fittings, and interior fittings are where two kitchens that look identical end up at very different prices.
Be explicit about how doors open. Handleless fronts work by routed channel or touch-to-open mechanism; both photograph the same but load differently over years of daily use. Say whether you want soft-close on doors, drawers or both, and send datasheets for any appliance already chosen — oven, steam oven, dishwasher, fridge, wine column. Appliance dimensions should reach the supplier before carcass depths are fixed, not after.
5. Scope: one kitchen, or the whole fit-out
If grey cabinets will sit beside matching wardrobes, a media wall, a vanity or built-in joinery, ask whether those should be produced together. One production batch keeps tones and edge details consistent and leaves you with a single set of drawings to coordinate. Grouping interior fixtures — cabinetry, vanities, doors, panelling, lighting — with one supplier avoids matching three suppliers' greys on site.
6. Delivery, access and installation terms
Give the destination city, the delivery address type (apartment tower, gated villa, green-field site), lift or stair constraints, and the date the site needs the goods — then work backwards to the date drawings will genuinely be signed off. Site readiness slips far more often than production does.
State who is responsible for what: customs clearance, container receipt, installation, snag sign-off. Furniture logistics and door-to-door delivery covers freight, documentation and loading plans, with installation handled as a separate stage — so we need site details in writing before we commit to a schedule rather than an estimate.
7. Quantities and phasing
For a private home, say whether one kitchen is the entire order or the first of several properties. For a development, give unit counts, the number of unit types, and which phases are confirmed rather than anticipated. Repeatable unit types change what is worth standardising and what stays bespoke — and that difference usually shows up in the price per kitchen.
A checklist to paste into your next enquiry
- Measured drawings with levels, services and appliance positions marked
- Grey reference plus required surface finish and sheen
- Door construction: handleless flat, shaker, or mixed
- Board and edge questions for wet or high-traffic areas
- Interior storage plan and soft-close requirements
- Appliance datasheets
- Related joinery that has to match
- Destination, access constraints, required site date
- Quantities and phase breakdown
Send those nine items and a supplier can return an actual quotation with an actual production window instead of a range. If you are specifying grey minimalist cabinets for a villa, apartment or hospitality project, send your drawings and finish reference through our contact page and we will come back with the specification questions that still matter.