An eight-metre swim spa is not a piece of furniture you can drop onto a plan and forget about. It is a wet structure with an equipment load, an electrical demand, a drainage logic and a set of access dimensions that have to agree with the architect's drawings, the landscape layout and the site contractor's programme before the shell ever leaves the factory. This guide walks through how we coordinate the Outdoor Swim Spa WS-PC08ST with design drawings and on-site requirements, so the civil works, the power supply and the delivery sequence all land in the same week rather than colliding on site.

Start from the catalog envelope, not the pretty render

The WS-PC08ST sits in our configurable outdoor swim and hydrotherapy range. The catalog records the shell at 8000 × 2400 × 1470 mm, with a control system, a swim training system, one filter pump, six water jets, four LED lights and a total connected power of 6.55 kW. Treat those figures as the starting envelope for setting-out, not as the final construction dimension: the equipment cabinet zones, steps, handrail positions and any insulation build-up sit outside the shell line, so your cleared rectangle on the drawing will always be larger than the spa itself.

Catalog data for WS-PC08ST

  • Shell dimensions: 8000 × 2400 × 1470 mm
  • Control system: 1 set  |  Swim training system: 1 set
  • Filter pump: 1 pc  |  Jet total: 6 pcs  |  LED lights: 4 pcs
  • Total power: 6.55 kW
  • Catalog features: water jets, LED lighting, ozone, swim training system

A practical rule we apply on villa and resort packages: draw the spa footprint first, then add a working perimeter for filter pump access, control panel servicing and jet maintenance. Anything fixed against that perimeter — a planter wall, a glass balustrade, an outdoor kitchen run — becomes a permanent obstruction to the person who has to open the cabinet in three years' time.

What has to appear on the design drawings

When a swim spa arrives late in a project, it is almost always because the drawing set never carried the information the site team needed. For this model we ask for the following items to be shown or agreed at design stage, then confirmed against the production specification before order.

Drawing / disciplineWhat we need fixed on it
Landscape and layout planShell outline with a marked service perimeter, step position, entry direction from the pool deck, clear headroom where the spa is under a pergola or hardtop.
Structural / civil detailLoad-bearing slab or plinth around the full shell perimeter, level tolerance for the bearing line, provision for backfill or side enclosure if the spa is partly recessed.
Electrical layoutDedicated supply run to the control location sized against the confirmed configuration power, isolation and protection devices, cable route that stays clear of the excavation.
Drainage and water supplyOverflow and drain-down connection, make-up water point, distance from the filter pump so priming and draining stay workable.
Access and logistics planThe delivery route from the truck to the final position: gate widths, turning radii, overhead cables, crane or forklift pickup points.
The 6.55 kW figure in the catalog is a configuration-level number, not an electrical design value. Options such as a heat pump, additional water pumps, UV sterilisation or sand filtration change both the connected load and the physical cabinet layout, so the electrician should size from the confirmed order specification rather than from the product page.

Site requirements we confirm before production starts

Once the drawings carry the envelope, we move to the site conditions that decide whether installation runs in a day or drags across weeks. These are the points our project team takes up with the client's architect and site contractor:

  • Foundation line and level. The shell needs continuous support along its bearing perimeter. A slab poured to a different outline than the confirmed envelope means either rework on site or a shimmed installation nobody wants to sign off.
  • Recessed or above-ground. A partly recessed spa needs retaining design, side insulation and ventilation to the equipment zone; an above-ground unit needs steps and a deck detail. Both decisions change the civil scope, so they belong in the tender, not in a site variation.
  • Power supply point. Where the supply originates, how it is protected, and whether the distribution board has capacity for the confirmed load. We confirm the electrical requirement of the selected configuration with the client's engineer.
  • Drainage and water filling. Where the spa drains to, and how it is filled for commissioning. On rooftop or terrace positions this also affects waterproofing details.
  • Lifting and access. An eight-metre shell needs a clear path. We check the delivery route against the site plan before shipping, because the cheapest solution — arriving early, while the ground is still open — is only cheap if someone plans it.

Configuration options change the coordination package

The catalog lists control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps as options for this range. Each one has a consequence somewhere else in the drawing set:

  • Heat pump and insulation — additional electrical load and, in cooler climates, a case for insulating the shell sides where they are exposed to ground or air.
  • Sand filtration — more plant volume, so more space in the equipment zone and another access door on the layout.
  • UV sterilisation and ozone — wiring and mounting positions that need to be reachable for service.
  • Steps — deck level and step geometry have to match the finished pool deck height, not the sub-base.

Our recommendation is simple: lock the option list before the civil package is let. If a heat pump or sand filter is added after the equipment zone has been built, you are paying twice — once for the plant and once for the wall.

Where the swim spa sits inside a whole-project furnishing package

Very few clients buy a swim spa on its own. On villa and hospitality projects it arrives as one line in a larger package that also carries poolside and outdoor furniture, sun loungers, pergolas and hardtops, bathroom ceramics, lighting, wall and ceiling finishes. Coordinating all of it against one set of drawings is where a single supplier earns their place: the same team that specifies the spa envelope also checks that the swimming pool and swim spa line, the deck furniture layout and the interior fit-out reference the same levels and the same programme.

Where a project needs a different shape or footprint — a courtyard terrace, a hotel rooftop, an irregular garden edge — we also produce customized-shape outdoor spas and hydrotherapy pools in square, round, oval and curved layouts with an acrylic shell and structural reinforcement. In those cases the drawing coordination runs in reverse: the shell geometry is developed from the site constraint, then released to the architect for the civil and electrical detail around it.

For clients who would rather hand over one coordinated package than manage several trade packages separately, our turnkey villa and hospitality solutions cover design consultation and space planning, material selection and product specification, manufacturing with quality control, project management and site coordination, then installation and handover. The swim spa is simply one more item on that schedule, with its envelope, power and drainage information issued to the drawing set at the same time as everything else.

Delivery sequence: what happens after the drawings are agreed

With the envelope, options and site conditions fixed, the remaining steps follow the order most project teams already work to. We produce to the confirmed specification, pack for export and arrange freight with the paperwork the destination port needs — commercial invoice, packing list, certificate of origin — under door-to-door delivery terms agreed case by case. The site team completes foundations, power and drainage while the unit is in production, so the spa can be set on its bearing line as soon as it lands. Commissioning then follows the confirmed configuration: fill, electrical connection at the agreed supply point, jet, filtration, lighting and swim training function checks, and a snag walk with the client's representative.

Send us the layout plan, the section through the intended spa position and your shortlist of options. We will return the confirmed envelope dimensions, the electrical requirement for that configuration and a setting-out note your site contractor can build from — before the concrete goes down.

Planning a villa or resort project around an eight-metre swim spa? Contact SANTERSON with your drawings and we will coordinate the Outdoor Swim Spa WS-PC08ST against them, from specification through to installation.