A swim spa is one of the easier outdoor additions to specify badly. The shell looks finished in every brochure photograph, yet the items that decide whether it works on your site — pump layout, power draw, filtration, water treatment, access and delivery — are often left out of the comparison sheet. This checklist follows the Outdoor Swim Spa WS-PC05CH as a worked example, so each line can be checked against published figures instead of a sales promise.

1. Footprint and clearance, not just the shell size

The catalogue footprint for this model is 5000 × 3000 × 900 mm. Treat that as the water envelope, then add what your site actually needs around it: a walking edge on at least two sides, room for the equipment access panel, and a clear path from the delivery truck to the pad. A spa that fits the plan but cannot be craned over a fence or a planted bed is the most common avoidable problem on villa and resort sites.

Confirm the finished ground level, the bearing capacity of the slab or deck, and whether the unit sits above grade, semi-recessed or fully recessed. Recessed installations change drainage, ventilation and service access, and those decisions are far cheaper to make before production than after.

2. Pump and jet layout

The published configuration lists one water pump, one filter pump and 30 jets in total. Two numbers matter more than the jet count alone: how many pumps drive the jet circuit, and whether filtration runs independently of the massage circuit. A separate filter pump lets the water turn over while the jets are off, which keeps the spa usable between sessions without running a massage pump for nothing.

Write down which seats the jets serve. A hydrotherapy zone aimed at the shoulders and lower back behaves differently from an all-over jet field, and that difference should match how the spa will be used — post-training recovery, guest treatment at a resort, or casual family use.

3. Total power and the electrical supply

Total power for this configuration is listed as 2.45 kW. That figure covers the standard equipment shown; it does not cover a heat pump, extra lighting circuits or an added swim-training unit. Before ordering, ask for the assembled load of your exact specification and hand that number to the local electrician, along with the required circuit size and protection device. Electrical requirements are site-specific and must be confirmed against local regulations by a qualified installer.

4. Water treatment and sanitation

Ozone is shown as a feature on this model. Ozone handles oxidation load, but it does not replace the rest of a water-care plan. Decide up front whether UV sterilisation is added, what the filtration media is, and how often the filter is expected to be cleaned in your climate. A spa on a dusty terrace or beside a leafing garden needs a different maintenance rhythm than one under cover, and that rhythm determines running cost more than any single specification line.

5. Lighting and the surrounding deck

One LED light is included in the listed configuration. Underwater lighting sets how usable the spa is after dark, but the deck lighting, the poolside furniture and the sightlines from the house matter just as much once the spa becomes an evening space. Santerson supplies outdoor furniture for villas and resorts alongside these units, so loungers, side tables and shade sit in the same order rather than being sourced from three different vendors on three different lead times.

6. Options that change the specification

Catalogue-listed options for this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Each one moves both the price and the site preparation. Insulation and a heat pump change the running profile in a cool climate; sand filtration changes where the filter vessel sits; steps change the access geometry. Confirm availability and compatibility for the specific model before treating any option as standard.

7. Where it fits in a wider project

For villa and hospitality projects, a swim spa is rarely bought alone. It arrives with paving, decking, screening, outdoor seating and often an interior fit-out on the same programme. Coordinating those items through one supplier reduces the number of handovers between trades — which is where most schedule slippage appears. See the swimming pools and swim spas range for comparable configurations, and customizable shape outdoor spa options where a standard footprint does not suit the site. Santerson's turnkey villa furnishing service covers design, custom and OEM production, door-to-door delivery, installation support and after-sales support in a single scope.

Before you send the enquiry

  • Site photograph, finished levels and the delivery route from the road to the pad
  • Intended use — exercise, hydrotherapy, guest treatment or mixed family use
  • Preferred installation type: above grade, semi-recessed or fully recessed
  • Options you want priced: heat pump, UV, sand filtration, insulation, steps
  • Local electrical supply details for the assembled load

Send those five items with the model reference and the specification conversation starts from facts rather than assumptions. That is the shortest path from a brochure to a spa that performs on the day it is switched on.