A wall panel order rarely goes wrong at the drawing board. It goes wrong in the gap between what you pictured and what the factory understood. Send a vague request, and you will receive panels that are technically fine but visually wrong: the wrong relief depth under your lighting, a surface that reads as plastic at two metres, a size that does not line up with your reveal. This guide sets out exactly what to put in front of a manufacturer so a custom decorative wall panel for interior home decoration arrives ready to install rather than ready to argue about.
Start with the room, not the product
Manufacturers work from a specification sheet, but the specification only holds together if the room context is stated first. Before you list any finish or dimension, write down four things: which wall, which room, what sits against it, and how that wall is lit.
- The wall itself. Overall width and height, plus every fixed constraint: skirting height, architraves, switch and socket positions, radiator or air-conditioning returns, curtain recesses, and where the panel must stop at a doorway or ceiling reveal.
- The room use. A bedroom background wall behind a headboard behaves differently from a hallway that gets brushed by luggage, or a bathroom wall that sees steam. Say which one it is; moisture resistance and cleanability change with the answer.
- Contact risk. Low-level panels in a corridor, a feature wall behind a dining chair, a splash zone beside a basin — each invites a different surface choice.
- Lighting. Note whether light falls on the wall at a grazing angle. Relief depth and pattern scale look dramatic under grazing light and flat under diffuse ceiling light. Attach a photograph taken at the time of day you normally use the room.
This single page of context is what lets a factory advise instead of simply quote. It also protects you: when the brief states the condition, the recommendation that follows is accountable.
Specify the surface language precisely
"Wood look" and "stone look" mean nothing on their own. Two factories can both produce a wood-grain panel that looks nothing alike. Give the manufacturer three levels of detail.
- Material family. State whether you want a rigid decorative panel, a three-dimensional relief panel, or a flexible sheet that bends around a curve or arch. Flexible mineral sheets can be rolled for shipping and applied to curved walls, columns and arches — an option worth raising early if your design has any radius in it.
- Pattern reference. Send a physical sample, a scan, or at minimum a photograph with something of known size beside it. For timber, name the species tone and the grain character you are after rather than a colour code alone; grain depth drives how real the surface reads.
- Sheen and texture. Matte, satin or gloss, and whether the surface should carry tactile texture or stay smooth. Gloss at grazing light shows every fixing line; matte hides them but shifts colour with the light source.
If you are matching an existing element — flooring, a door, a worktop — send a sample of that too and say explicitly that a match is required, not simply a similar tone. Match requests change tooling and lead time, so they must be declared at the enquiry stage.
Give dimensions as an opening, not a hope
Custom sizing is where home projects gain their value, and where paperwork fails most often. State the finished size you need, then state how much tolerance your installer can absorb.
| What to state | Why it matters |
|---|---|
| Finished panel size per bay, in millimetres, with a dimensioned sketch or marked-up photographs | Panels are cut to your openings; guesses become site trimming |
| Panel thickness and relief depth for patterned surfaces | Affects door reveals, architrave depth and where sockets sit proud |
| Coverage per wall plus a stated spare allowance | Reordering a small quantity later often means a second production run at different cost |
| Cut-outs: number, size and position for switches, sockets and vents | Factory-cut openings beat on-site cutting for edge quality |
| Corner and edge treatment: mitred, square-edged, or covered by a trim | Determines whether external corners need matching pieces ordered together |
| Total number of pieces and how they should be numbered on the back | Numbered panels turn a multi-bay wall into a straightforward assembly |
Ask the manufacturer to confirm the size they can actually hold, rather than assuming your drawing is achievable. A supplier who supports made-to-measure work will tell you where a dimension is awkward and propose a practical adjustment before production starts.
Set out installation conditions in writing
Panels that arrive correctly can still fail on site. Cover the substrate and the method before you order.
- Substrate. Plasterboard, render, brick, tile or an existing painted wall — say which, and whether it is flat, damp or previously patched. Adhesive choice and any battening depend on this.
- Method. Ask what fixing system the panel is intended for: adhesive, mechanical fixings, or a batten framework. Request the fixing guidance in writing so your installer follows it rather than improvising.
- Cutting on site. Lightweight panels that cut with standard tools shorten the programme and reduce waste around awkward corners; confirm what tooling your installer needs.
- Wet and humid rooms. If the wall is in a bathroom, kitchen or any space that gets condensation, say so plainly and ask which products are suitable for humid indoor conditions.
- Sequence. State where lighting, electrical first-fix and joinery sit in your programme, so panels arrive after the wall is ready rather than sitting on site unprotected.
Ask the four questions that expose real capability
Any supplier will answer a request for a price. These four questions tell you whether they can actually deliver a custom job.
- Can I see a sample of the exact surface, not a catalogue card? A sample in your own light settles colour and relief debates before money changes hands.
- What is fixed after I approve the sample? Know which decisions become irreversible — size, colour batch, pattern direction — and which can still move.
- How are panels packed, and what happens to damaged pieces? Ask about edge protection, pallet layout and replacement terms for transit damage before you compare prices between suppliers.
- Who supports the wall afterwards? Confirm what happens if a piece is missed on site or damaged later, and whether replacements can be produced in the same specification.
Written answers to these questions are worth more than a lower quotation. They are also the document you will point to if something arrives wrong.
Order samples before you commit to a whole wall
For any residential feature wall, request physical pieces of your shortlisted surfaces and live with them for a few days. Hold each one against the wall at three times of day, next to the fabric, flooring and ironmongery it will sit beside. Check three things: does the pattern scale suit the bay width, does the sheen behave under your lighting, and does the colour hold in shade as well as in daylight.
Sample review is also where good alternatives appear. A relief panel may be too busy for a small bedroom; a flexible wood-grain sheet may solve a curved wall that rigid boards cannot; a smoother surface may be the better answer for a hallway that takes knocks. Decide these in the sample stage, when changing your mind costs nothing.
A brief you can copy
Send this with your enquiry
Project and room: which wall, which room, how it is used. Drawings: dimensioned elevations of every panelled bay, marked with skirting, architraves, switch and socket positions, and cut-outs listed by number and location. Surface: material family, pattern reference or attached sample, required sheen, and whether a match to an existing finish is needed. Sizes: finished panel dimensions in millimetres, thickness, relief depth, total pieces, spare allowance, corner and edge treatment. Conditions: substrate type, humidity exposure, fixing method requested. Programme: site-ready date, delivery address, and who receives the goods. Commercials: quotation broken into product, packaging and freight; sample approval point; what becomes fixed after approval; replacement terms.
That single message puts you ahead of most enquiries a factory receives. It also makes quotations comparable, because every supplier is answering the same scope instead of guessing at it.
Where a one-stop supplier changes the picture
Home projects rarely stop at one wall. The same renovation touches flooring, joinery, lighting and doors, and each of those carries its own supplier, delivery window and after-sales contact. Ordering wall panels alongside other finishes from a single manufacturer reduces the number of handovers you have to manage yourself.
SANTERSON has operated as a China-based furniture and building materials manufacturer since 2008, supplying custom and OEM products for villas, hotels and offices. Alongside decorative panels — including modern decorative wall panels with surfaces that simulate stone, wood and fabric effects, and luxury 3D wall panels for feature walls — the range covers engineered wood flooring, cabinetry, doors, lighting and interior fixtures. The company describes its service scope as design consultation and material selection through production, door-to-door logistics and installation support; confirm the specific scope, sizes and delivery terms for your project at quotation stage.
If you are sourcing several finishes together, send one brief covering all of them. A supplier who can produce panels, flooring and joinery to a common colour and material palette will flag clashes — a floor that competes with a wall pattern, for instance — long before they reach your site.
Questions home owners ask us
How many samples should I order for one feature wall?
Two or three surfaces at full sample size, tested against the actual wall. More than that and comparison becomes guesswork; fewer and you are choosing on a photograph.
Should I order the whole wall at once?
Yes, including a stated spare allowance for cuts and future repair. Batches produced weeks apart can differ in tone and grain, so the pieces you buy later may not sit invisibly beside the originals.
Can panels go on an uneven or previously painted wall?
Tell the manufacturer the true condition of the substrate and let them advise on preparation and fixing. Panel systems assume a stable, reasonably flat background; concealing a poor wall with adhesive alone is where installations fail.
Are flexible panels only for curved walls?
No. They are useful wherever a rigid board is awkward — arches, columns, radiused corners — and they ship rolled, which eases handling in a finished home.
To brief SANTERSON on a decorative wall panel project, send your elevations, sample references and the room conditions described above through the contact page. Enquiries are handled Monday to Saturday, 8:00 AM to 6:00 PM (GMT+8), with a reply within 24 hours.