A wood veneer kitchen quotation from a supplier almost never comes back on the day you send a floor plan. The delay is rarely about pricing maths — it is about missing information that stops the factory from deciding what to build, how to press and finish the veneer, and how the units will be packed for export. Below is the exact brief we work from when quoting Wood Veneer European Cabinets, so a first-round price and a buildable specification arrive together instead of after six rounds of email.

Send drawings, a finish decision, an appliance schedule and an access note in one message, and the quotation can cover carcass, doors, worktop interface, hardware and freight in a single document. Send only a photo of your old kitchen, and you will get a ballpark range with a list of questions attached.

Why a veneer supplier asks these questions before pricing

With a foil or melamine door line, the finish is fixed at the factory and the only real variables are size and layout. Wood veneer behaves differently. The face material is a thin cut of real timber, so grain direction, leaf matching, colour tone and lacquer build all have to be agreed before cutting, and each of those decisions changes labour time and therefore price.

The door construction also matters commercially. A flat veneered panel on a stable substrate is not the same job as a framed or moulded veneer door with returns, and neither is the same as a veneered panel used on a tall unit where the sheet has to be cut from one log batch so the figure runs continuously. If your enquiry says only "wood veneer, European style", we cannot tell which of those you mean — and that single ambiguity can move a quotation by a wide margin.

For this reason our Modern European Kitchen Cabinet line is quoted from a project specification rather than from a catalogue price list: sizing is made to measure, materials and finishes are selected per project, and the layout is drawn to the space.

The seven items that decide the quotation

1. Drawings or measured dimensions

A CAD plan is ideal, but a hand-measured set of elevations works as well as long as it shows overall run lengths, unit-by-unit widths, room height, and where the ceiling, windows, radiators, gas meter and soil pipe sit. Kitchen joinery fails on the small obstructions, not on the straight runs.

Practical minimum: front elevations with heights to the underside of the ceiling and to the window sill, plus a note on which walls are true and which are out of square. If you have a designer's layout, send it — but say whether the dimensions are final or indicative.

2. Species, cut and grain direction

"Oak" is not a specification. Tell us the species, then the cut: crown-cut (cathedral figure) or quarter-cut (straight, tight figure). Both are available in oak, both look completely different once lacquered, and quarter-cut costs more in material because of yield. State whether you want grain running vertically on doors and horizontal on drawer fronts — the default on most European-style kitchens — or a continuous book-matched figure across a feature run.

3. Finish and sheen

Natural open-pore, brushed and glazed, stained to a colour sample, or opaque-tinted with the grain still visible: these are different processes with different pass counts. Send a sheen target (matte, satin) and, if you have one, a physical or digital reference sample with its make and code. Our Matte Wood Veneer Cabinets and High Gloss Wood Veneer Cabinets sit at opposite ends of that process list, which is why the finish line in your brief carries real pricing weight.

4. Door style and handle method

Slab, shallow profile, or framed; handles, integrated profile pulls, or push-open. Handleless fronts look simple but change the carcass detail: rebate depth, door setback, and whether a channel or magnetic push mechanism goes behind each front. If you are comparing our Handleless European Cabinets against the veneer line in the same collection, say so in the enquiry and we will price both constructions side by side rather than guessing which one you meant.

5. Carcass, interior and hardware preferences

Specify carcass colour and thickness, whether interiors match the doors or use a lighter standard, drawer boxes versus shelves, and the hardware brand or range you expect. Tall larder and pantry units need load-rated runners and a stated shelf span; an island with drawers on both faces needs a different back panel treatment than a wall-backed run. If you have a preferred hinge and runner system, name it — otherwise we quote to our standard specification and you can see the upgrade cost as a separate line.

6. Appliance and worktop schedule

Built-in ovens, steam ovens, wine coolers, dishwashers, extractor type and hob position all fix unit widths before the layout can be locked. Send model numbers or at least cut-in dimensions. Worktop material and thickness matter to us too, because the top of a veneer door and the scribe to a stone worktop are finished differently depending on whether the slab is 20 mm or 30 mm and whether it returns up the wall.

7. Delivery address, access and assembly level

Veneer doors travel best assembled and individually protected, but a fourth-floor walk-up changes what is sensible. Tell us the delivery address, floor level, lift dimensions or stair width, parking restrictions, and whether the units are being handed to a local installer or fitted by our own team as part of a wider package. We ship door-to-door with freight arranged by sea, air or rail, so destination port versus final address changes the quotation structure.

Quick reference: what we do with each item

What you sendWhat it lets us priceIf it is missing
Elevations with heights and obstructionsUnit widths, scribes, filler panels, tall-unit placementBallpark only; layout assumptions we have to rework later
Species, cut, grain directionVeneer grade, leaf matching, log-batch allocationCannot confirm figure continuity or material cost
Finish and sheen targetLacquer passes, brushing or glazing labourQuote excludes the most variable cost line
Door style and handle methodPanel construction, carcass detail, mechanism costTwo or three possible prices instead of one
Hardware and interior preferenceRunners, hinges, drawer boxes, interior finishStandard spec assumed; upgrades quoted as extras
Appliance and worktop scheduleAppliance housings, ventilation gaps, worktop interfaceLayout cannot be frozen; unit widths stay provisional
Delivery address and access notesPacking method, freight mode, container loadingEx-works figure only, no landed cost

What the finished quotation should show you

A usable quotation itemises by unit or by run, states the veneer species and cut, names the finish system and sheen, lists hardware to brand and range, and separates cabinetry from worktop interface, appliance housings and freight. It should also record the assumptions — for example that site dimensions are to be re-verified before production, which is standard practice on made-to-measure joinery.

Where a project needs veneer kitchens coordinated with other built-in elements — wardrobes in matching veneer, wall panelling, doors with concealed frames — say so early. Matching veneer across cabinets and Wood Veneer Panels is easier to achieve when the sheets are allocated in one batch, and it usually costs less than ordering the two elements months apart.

Common reasons a veneer quotation comes back high

  • Book-matched or continuous-figure doors requested after cutting has been planned — extra leaf selection and yield loss.
  • Mixed species across one run without saying which wall is the feature wall, so small batches are needed.
  • Curved or angled carcasses in veneer, which need a laminated substrate and jig work rather than a straight press.
  • Very tall doors over standard heights, requiring a heavier substrate and anti-warp treatment.
  • Last-minute hardware changes from lever handles to an integrated handleless profile after the carcass detail was set.

Copy-paste enquiry checklist

Before you send the enquiry, confirm you have covered:

  • Room elevations with overall and unit-level widths, plus ceiling and sill heights
  • Species, cut (crown or quarter), grain direction and whether figure must run continuously
  • Finish system, sheen, and any reference sample with make and code
  • Door style, handle method, and the number of tall, wall and base units
  • Hardware expectation, interior finish, drawer-versus-shelf count
  • Appliance models or cut-in sizes, hob and extractor position, worktop material and thickness
  • Delivery address, floor and access constraints, and who is fitting the units
  • Target installation window and whether other joinery should match the same veneer

Frequently asked questions

Can you quote from a photo of my existing kitchen?

We can give a rough range, but not a buildable price. A photo does not reveal carcass heights, obstructions or appliance cut-ins, and veneer specification cannot be judged from an image.

Can you quote only the doors if I keep my existing carcasses?

Sometimes. Replacing fronts on a sound carcass is viable when the box sizes are documented and the fixing method can be matched, so send internal carcass dimensions and hinge positions; if the boxes are out of square or non-standard, replacing the units is usually cheaper than adapting to them.

Do you supply the worktops?

Tell us the material and thickness you intend to use. Where engineered stone or laminate tops are part of a wider package, we can coordinate them; if you are sourcing locally, we quote the cabinetry to interface with your slab.

Will the veneer colour match my sample exactly?

Real wood varies between batches. We confirm the selected species, cut and finish specification in writing, and recommend approving a door sample before full production on any colour-critical project.

Can you match veneer to my wardrobes or wall panelling?

Yes, when the elements are specified together. Matching species, cut and finish across kitchen, storage and panelling is a batch-planning decision, so raise it in the first enquiry.

Do you handle shipping and installation?

We arrange freight and door-to-door delivery with the customs paperwork handled at our end, and we support on-site fitting as part of a turnkey package or guide a local installer if you prefer to fit locally.

Send the brief once, get the quotation in one pass

The pattern is consistent: complete drawings plus a decided finish specification produce firm prices and predictable production; vague enquiries produce estimates that have to be rebuilt when the real numbers arrive. If you are specifying veneer kitchens for a villa or an apartment handover, send the checklist above with your layout and we will return a specification-based quotation covering cabinetry, hardware and delivery.

Working from drawings also lets us plan the build around the veneer rather than around the calendar: sheet allocation for matched fronts, lacquer stages that need drying time between passes, and packing sequences that keep the feature doors intact in transit. That planning starts at the quotation stage, which is another reason a complete first enquiry shortens the whole project.

Talk to us about your kitchen package

Send drawings, finish references and your appliance schedule to PHILLIP on WhatsApp +86-13928214007 or by email at santerson@qq.com. Enquiries are answered within 24 hours during business days (Monday–Saturday, 8:00 AM–6:00 PM GMT+8). Start from the contact page if you prefer to submit details in writing.