A swim spa quotation goes wrong in two directions. Send a manufacturer one line, something like "7 m spa, jets, LED", and you get a price for a unit that does not fit your deck. Send a folder of unconfirmed numbers and you spend the next three revisions arguing about what was ever meant to be built. The Outdoor Swim Spa WS-PC07ST sits in a configurable range, which means the brief you write decides how close the first drawing lands to the final unit. Below is the checklist we work from when a buyer opens a project on this model.
Start with the envelope, not the equipment list
Catalogue dimensions for WS-PC07ST are 7000 × 2400 × 1470 mm. Treat that as the starting point of a conversation about your site, not as a number to paste into a drawing and forget. Three measurements decide whether the shell can physically arrive and be set down where you want it:
- Access route. Gate width, turning radius at the driveway corner, overhead cables, and whether a crane or a hiab lift is available at the placement point. A 7 m shell that clears the gate but not the side passage never reaches the deck.
- Structural support. A filled spa is heavy: water plus acrylic shell, cabinet and plant. State what it will sit on, whether that is a suspended timber deck, slab on ground, plinth, or a sunken pit with a surround, and share the framing or slab detail you already have.
- Clearances for service. Pump, filter and control components need reach after installation. Owners who want a finished surround should say so at the outset, because it changes which side the plant is arranged on.
Send photographs of the site and a marked-up plan with your own dimensions on them. A single annotated photo answers more questions than a paragraph of description.
Separate what is standard from what you are adding
The specification sheet for this model lists one control system, one swim training system, one filter pump, six jets in total, four LED lights and a total power figure of 6.55 kW. That last number is the catalogue entry for the standard configuration; it is not your electrical load, because options move it. Water pumps, heat pumps, UV sterilisation, sand filtration, additional insulation and steps appear as catalogued options across the range, and availability and compatibility vary by model, so each one needs confirming for the exact build you are quoting.
Write your brief in two columns. Column one: what you expect to be included. Column two: what you want added, with a reason attached ("heat pump, for year-round use in a cool climate"; "extra insulation, for winter energy cost"). A supplier can price that quickly and flag conflicts. Two buyers describing the same spa in those terms end up with different quotations, which is exactly why the columns matter.
Put the electrical and plumbing questions in writing early
These are the items that stall a project after the unit is built, because they belong to your local tradesperson and not to the factory. In your first message, ask for:
- The supply requirement for the configuration you are quoting: phase, voltage, circuit rating, and how the total power figure is distributed across swim pump, filter pump, jets, lighting and ozone.
- Where the control panel is located on the shell and what it governs, so your electrician can plan conduit runs.
- Drain, overflow and water-fill arrangements, plus any plant-room or equipment-space requirement.
- What documentation ships with the unit: wiring diagram, component list, operation and maintenance manual, spare-parts list.
Then hand those requirements to your electrician and plumber before the shell is manufactured. Their questions are usually the ones that expose an assumption in your own brief.
Say who the spa is for and how it will be used
A 7 m shell with a swim training system serves different owners depending on the answer. A household with one lap swimmer each morning uses it differently from a villa that hosts weekend guests, and a resort or club facility differs again, because duty cycle, cleaning routine, supervision and access control all change what you should specify. State the user profile plainly: number of regular users, whether children will be in it, hours per day, and whether it is private or commercial.
If the spa is part of a wider outdoor scheme, say so now rather than later. Poolside loungers, an outdoor dining set and shade structures are usually specified together, and coordinating them with one supplier keeps finishes and delivery windows aligned. The Swimming Pools and Swim Spas range is published alongside the rest of the outdoor collection for that reason.
Agree the delivery and installation sequence before you order
A swim spa crossing an ocean arrives on a container, not a courier van. Your brief should state the delivery address, whether the site is reachable by a full container vehicle, and who handles the last leg from port to placement point. Ask which shipping terms apply to your quotation and what paperwork accompanies the shipment; commercial invoice, packing list and origin documentation are normally part of the export process, and import requirements are yours to confirm with your own customs broker.
| Before order | Signed specification, site dimensions, electrical requirement, chosen options, delivery address and access notes. |
| During production | Photographs or video of the shell at agreed stages; confirmation of any late change in writing. |
| Before arrival | Crane or lift booked, base prepared, conduit and drainage completed, electrician scheduled. |
| At handover | Fill test, jet and lighting function check, control walkthrough, snag list, spare-parts and warranty paperwork received. |
This sequence is the same one used for other fixtures on a project, which is why buyers who source several elements together tend to hit fewer gaps. Santerson describes its scope as covering design consultation, material selection, manufacturing and quality control, project management, site coordination, installation and after-sales support under One-stop Furniture and Building Materials Supplier, with freight and door-to-door delivery handled through Furniture Logistics and Door-to-door Delivery. Ask for the specific commitments you are relying on, meaning dates, responsibilities and who does what at each stage, in your quotation rather than assuming them from marketing pages.
When the standard model is not quite right
If the envelope or the equipment mix needs changing, that is a custom conversation rather than a footnote on a catalogue enquiry. Santerson's Custom Furniture Manufacturer service covers bespoke design and prototyping, material and finish selection and OEM work; for a swim spa the practical version of that brief is a marked-up dimension drawing, a list of required equipment with quantities, the intended use, and any finish or surround requirement. Expect the quotation to move with the changes, and expect the revised specification to come back before production starts.
Questions worth asking in the first message
- Which equipment is included in the quoted price for this configuration, item by item?
- What is the total connected power for that configuration, and what supply does it require?
- Which options are actually available on WS-PC07ST, and which belong to other models in the range?
- What is the production timeline, and what is included in the quoted freight price?
- What warranty applies to shell, equipment and controls, and how are spare parts supplied afterwards?
- Who prepares the base, who makes the electrical connection, and who commissions the unit on site?
A supplier who answers those six questions in one pass is telling you something useful about how the rest of the project will run. Send the envelope, the use case, the options you want and the site constraints together, and the first quotation you receive is worth comparing.