An 8-metre swim spa sits between two very different purchases. It is larger than a plunge pool, more complex than a hot tub, and it has to serve daily training as well as long-term asset value. That is exactly the position Outdoor Swim Spa WS-130Aⅳ-U occupies, and it is why a specification sheet alone is not enough to make a confident decision. The checklist below follows the order in which problems actually appear on site: the footprint you can build, the equipment list you can verify, the utilities you have to supply, and the supplier who stays reachable after delivery.

Start with the footprint, not the finishes

The catalog lists this model at 8000 × 3000 × 1400 mm. Treat those figures as the shell envelope and work outward from them. Access is the first practical question: an eight-metre basin has to reach the property, pass gates and side setbacks, and be lifted or routed into place without disturbing landscaping you intend to keep. Ask your supplier which delivery method and crane or forklift arrangement they plan for your address before you fix any boundary treatments.

Working depth is 1400 mm, which suits lap swimming with a swim current, standing hydrotherapy sessions and children playing under supervision. Confirm the internal water depth and the position of steps and seating against how the spa will actually be used. A buyer who trains three mornings a week and a buyer who mainly hosts weekend guests need different jet layouts, even when both select the same shell size.

Finally, settle drainage, waterproofing and the surrounding deck level early. The shell dimensions are fixed; the civil works around them are where budgets slip.

Read the equipment list line by line

The captured specification for this configuration shows a control system, four water pumps, one filter pump, 23 jets in total and five LED lights. The catalog also notes that a swim training system is not listed for this model variant. That single line matters more than any marketing description: if your purpose is lap swimming against a current, ask in writing whether the swim training unit is included, optional or excluded on the exact model code you are ordering.

Total power is stated as 11.85 kW for this configuration. Use that figure with your electrician to check supply capacity, protection devices and cable routing from the switchboard to the plant area. Do not assume the number transfers between variants; sibling models in the same shell size carry different pump counts and jet totals, which is why you should compare like with like.

SpecificationWS-130Aⅳ-UWS-130Aⅳ
Catalog dimensions8000 × 3000 × 1400 mm8000 × 3000 × 1400 mm
Water pump4 pcs1 pc
Filter pump1 pc1 pc
Jet total23 pcs20 pcs
LED lights57
Total power11.85 kW10.85 kW
Swim training systemNot listed in captured specifications1 set
Features shownWater jets, LED lighting, OzoneWater jets, LED lighting, Ozone, Swim training system

Figures transcribed from the catalog pages for each model. Confirm the final configuration on your order documents.

Match the option list to your climate and routine

Catalog-listed options include control systems, UV sterilization, additional water pumps, heat pumps, sand filtration, insulation and steps. Each one answers a specific question, so decide against your own conditions rather than taking the whole package.

  • Heat pump: decide how many months a year you intend to use the spa and what water temperature you expect. Heating an outdoor basin through a cold season is a different duty from maintaining a warm spa in a mild climate.
  • Insulation: relevant wherever the spa sits outdoors through cooler nights; it also affects how hard the heating equipment works.
  • Ozone and UV sterilization: water hygiene support alongside filtration. Ask what the routine chemical and cleaning schedule still requires after these are fitted.
  • Sand filtration: an alternative to the standard filter arrangement; clarify maintenance access and backwash drainage on your site.
  • Steps: entry height and position change with deck levels, so specify them after the civil design is settled.

Availability and compatibility vary by model. Get the option list priced in writing for the exact configuration, not described as a general brochure range.

Check the supplier's process, not just the product page

A swim spa is a project purchase: production, freight, site preparation and commissioning all have to line up. SANTERSON works as a furniture and building materials supplier covering villas, hospitality and office projects, with services that run from design consultation and material selection through manufacturing, project coordination and handover. For a swim spa, that same sequence applies, and it is worth asking who coordinates the interface between the spa supplier's technical drawings and your builder's civil works.

Useful questions to put to any supplier before you commit:

  • Which drawings and load, power and drainage requirements are issued with the order, and when?
  • How is the unit packed, shipped and delivered to your address, and who handles customs clearance?
  • Who sets the unit on the prepared base, connects utilities and commission-tests jets, filtration and lighting?
  • What is covered after handover, and how are spare parts for pumps, jets and controls sourced?

The answers tell you more than a glossy render. A supplier who can name the drawings, the delivery method and the commissioning steps has done this before on sites like yours.

Coordinate the spa with the rest of the outdoor package

A pool terrace rarely stops at the water. Loungers, shade structures and storage for chemicals and towels are usually specified around the same time, and materials that suit a wet, sun-exposed deck should be chosen together so finishes align. If you are furnishing a villa or resort exterior as one package, browse furniture series alongside the pool range to keep frames, textiles and timber-look surfaces consistent across the terrace.

Where the standard rectangular shell does not suit the plan, shape is not necessarily fixed. A Customizable Shape Outdoor Spa supports square, round, oval and curved layouts with an acrylic shell and structural reinforcement, which is the route to take when the terrace geometry, rather than the equipment list, is the constraint.

A short decision checklist

  1. Confirm site access, base design and deck levels against the 8000 × 3000 × 1400 mm envelope.
  2. Verify in writing whether a swim training system is included on your exact model code.
  3. Have an electrician review the stated total power and the routing to the plant area.
  4. Price only the options your climate and maintenance routine justify.
  5. Agree delivery, installation, commissioning and after-sales responsibilities before payment terms are signed.

Work through those five points and the decision on Outdoor Swim Spa WS-130Aⅳ-U stops being a guess about a brochure. You end up with a configuration matched to your site, utilities you can supply, and a supplier whose responsibilities are written down.

Send SANTERSON your site drawings, intended use and preferred options to confirm the configuration for WS-130Aⅳ-U: Contact Us.