A swim spa is one of the few outdoor products that keeps working long after the purchase order is signed. Water, power and controls sit outdoors all year, so what happens in the second and third year matters more than the brochure. If you are specifying Outdoor Swim Spa WS-115EⅢ-U for a villa terrace, a resort garden or an apartment amenity deck, the questions below are the ones worth putting in writing before payment.
1. Which equipment is actually in your configuration
The same shell can be supplied with different pump sets and treatment options, so ask for a component list against your order rather than the catalogue page. For WS-115EⅢ-U the site lists catalog dimensions of 5280 × 2200 × 1250 mm, one control system, three water pumps, one filter pump, 24 jets in total and two LED lights, with water jets, LED lighting and ozone shown as features. Total power is given as 9.65 kW. Optional items in the range include UV sterilisation, extra water pumps, heat pumps, sand filtration, insulation and steps — availability and compatibility change by model, so confirm what your quotation includes.
| Catalog dimensions | 5280 × 2200 × 1250 mm |
| Water pump / filter pump | 3 pcs / 1 pc |
| Jet total | 24 pcs |
| Control system / LED lights | 1 set / 2 pcs |
| Total power | 9.65 kW |
Ask the supplier to restate these figures in your proforma invoice and mark every option as included or optional. A configuration list signed by both sides is what you will refer back to if a part needs replacing later.
2. Electrical supply and site preparation
Total connected power drives the cable size, breaker rating and protection device on your side. Confirm the supply voltage and phase of the selected configuration, who supplies the isolator and residual-current protection, and which party is responsible for the connection at the spa end versus the distribution board. Also confirm what the site base has to carry: a filled shell of this footprint is heavy, and drainage, an access hatch for the pump compartment and clearances for servicing should be settled on the drawing stage, not after delivery.
3. Warranty: what is covered, by whom, and for how long
Ask for the warranty document, not a sentence in an email. A swim spa normally has separate cover for the shell, the cabinet and frame, pumps and jet motors, the control pack and the lighting, and those periods are rarely identical. Clarify whether cover is parts only or parts plus labour, whether an on-site technician or a remote diagnosis comes first, and what voids the warranty — water chemistry, unauthorised electrical work and frozen pipework are the usual triggers.
4. Spare parts: names, stock and lead time
A jet that fails in year three should not mean a new spa. Request the part list for your configuration with model or part references for pumps, seals, o-rings, filters, the control pack, LED modules and jet bodies. Then ask which of those are held as spares, how long a replacement takes to reach site, and whether shipping of a single small part is arranged by courier at an agreed cost. Buyers who order a spare filter cartridge and a pump seal kit with the spa usually avoid the longest downtime.
5. Installation, commissioning and handover
SANTERSON lists on-site installation, inspection and snags, warranty coverage, spare parts or replacement and ongoing maintenance under its Installation and After-sales Support service. For a swim spa, ask specifically who levels and sets the unit, who makes the electrical connection, who fills and balances the water, and what handover documents you receive — wiring diagram, control-pack manual, commissioning sheet and water-chemistry guidance. Agree in advance how defects found at handover are logged and closed out.
6. Maintenance support after the first season
Ozone reduces but does not replace sanitiser dosing, and filter pumps carry debris load. Ask for a maintenance schedule you can hand to a facilities team: filter cleaning intervals, water testing frequency, winterisation steps for cold climates, and what to check before long periods of non-use. Confirm whether technical questions after installation are answered by the same contact who handled your order, and in which hours.
7. Documentation that makes later support faster
Before the spa is installed, collect and archive: the configuration list with serial numbers, the electrical schematic, the control-pack software version, the packaging and container photos taken at delivery, and the inspection record for any transit damage. Claims move much faster when a buyer can send a serial number and a photo instead of a description.
- Which pumps, jets, lights and treatment options are included in my quoted configuration?
- What supply voltage, phase and circuit protection does the selected configuration need?
- Separate warranty periods for shell, plumbing, pumps, control pack and lighting — parts or parts plus labour?
- Which spare parts are stocked, and what is the lead time to my site?
- Who installs, who connects power, and what handover documents are provided?
- What maintenance schedule and after-hours technical contact comes with the unit?
If you are sourcing a swim spa alongside other outdoor or interior products for one project, Swimming Pools and Swim Spas can be coordinated with the rest of the package under our Turnkey Interior Project Solutions, from specification through door-to-door delivery and installation.
Send the site drawing, your preferred options and your target installation window, and we will confirm what WS-115EⅢ-U includes, the electrical requirements and the support terms in writing before production.