A wall-mounted bar unit looks simple on a drawing: a floating cabinet, a glass shelf, some LED strip, a bottle chiller below. On site it becomes a set of decisions about substrate, load path, service access and finish matching — and, when the cabinetry is coming from an overseas factory, about who confirms those details before production starts. This guide walks through how buyers and project teams source Santerson Wall Mounted Bar Units from our China-based workshop, what we need from your side at each stage, and where projects usually go wrong.

Start with the wall, not the cabinet

Wall-mounted bar units carry glass, stone tops, appliances and bottles — dead weight that a floor-standing cabinet never has to argue about. Before any drawing is issued, we ask three questions: what the wall substrate is (masonry, stud partition, or a steel-backed joinery wall), where the fixing line falls relative to the framing, and which services run behind the unit — power for the chiller and lighting, plus water if there is a sink. Those answers drive the carcass depth, the hanging system and the position of cut-outs.

For new-build villas and hotel suites this is straightforward: the wall can be built around the unit. For refurbishments — an apartment in Sydney or Melbourne where the bar is being added to an existing room — we usually work from a site survey or a measured photo set, then design a backing frame that transfers the load to solid structure rather than to plasterboard. Tell us which case you are in; it changes both the engineering and the installation sequence.

Decide what the unit has to do before choosing a style

The Bar Cabinets collection at SANTERSON covers several different briefs, and the fastest way to get an unhelpful quotation is to specify a look without specifying a job. Compare these configurations against your actual use:

  • Wall mounted bar units — open or glazed display above a counter, glass and stemware storage, lighting, small appliance garage. Best where floor area is tight.
  • Compact bar cabinets — self-contained units for a guest suite, office pantry or bedroom corner, sized for smaller rooms.
  • Glass front bar cabinets — display-led storage, typically paired with integrated cabinet lighting.
  • Integrated bar systems — bar joinery combined into a larger wall, so the bar reads as part of the paneling rather than a separate item.
  • Island bar units — freestanding work surfaces for open-plan kitchens and entertaining areas.
  • Tall bar cabinets — full-height storage and appliance housing, often used as the flanking element to a wall unit.

Most projects mix two of them: a wall unit for display and glassware, a tall or base unit for bottles, chiller and dry goods. Send us the room layout and we will tell you which combination actually fits, rather than quoting whatever was drawn.

What we need from you to quote properly

Every one of these units is made to measure, so a usable enquiry contains the same six items. Missing any of them produces a price that will move later — which is exactly what procurement teams are trying to avoid.

  1. Dimensions and setting-out. Overall width, height and depth, plus the finished floor level and the height of the counter or working surface if the unit sits above one.
  2. Wall construction. Substrate type and, for partitions, stud centres and noggings — or a note that a backing frame will be supplied.
  3. Appliances and services. Under-counter chiller or wine cabinet model (or the clearance you want), power location, and whether lighting is hard-wired or plug-in.
  4. Finish schedule. Door style, carcass material, finish family — matte lacquer, high gloss, wood veneer, melamine — and hardware. Where the bar must match kitchen or wardrobe joinery, send that specification so we can match the batch.
  5. Quantity and site locations. One villa or forty hotel rooms changes the production plan and the packing list.
  6. Delivery terms. Port or site address, and whether you want door-to-door delivery handled for us.

How the order runs from drawing to handover

SANTERSON has been manufacturing furniture and building materials in China since 2008, and a bar unit follows the same route as the rest of our one-stop project supply work:

  1. Design and shop drawings. Our team turns your brief into production drawings with dimensions, material call-outs, edge details, hardware schedule and cut-outs. You approve these in writing before anything is cut — this is the single most important sign-off in the process.
  2. Sample or finish confirmation. For veneer, lacquer and stone-look surfaces we can send samples so the colour and texture are checked under your own lighting, not ours.
  3. Production and inspection. Panels are machined, finished and assembled, then inspected against the approved drawing before packing. Wall units ship knocked-down or partly assembled depending on the hanging system, with fixings and a setting-out template.
  4. Packing and freight. Cabinetry is crated for sea, air or rail freight with the commercial invoice and packing list prepared by our logistics team. For multi-unit orders we label every crate to its room so the site crew are not guessing on the day.
  5. Installation and after-sales. Fixing, alignment and snagging follow your local trade's sequence; we support with installation drawings and, where required, replacement parts and hardware. Warranty terms and installer arrangements are confirmed per project rather than assumed.

Five things that cost projects the most money

  • Ordering against a schematic instead of a survey. A 20 mm error on a wall unit means either a visible gap or a re-made carcass. Confirm dimensions after plasterboard and floor finishes are in.
  • Ignoring the load path. Chiller plus bottles plus stone top is heavy. Specify the hanging system and backing frame at drawing stage, not at installation.
  • Matching finishes by photograph. Screen-to-screen colour matching fails on veneer and metallic lacquer. Order physical samples when the bar has to sit next to existing joinery.
  • No service clearance. A chiller boxed in with no ventilation or access panel will fail early and be expensive to reach. Leave the clearance the appliance manufacturer states.
  • Lighting added at the end. Recessed profiles need a channel in the shelf or carcass. Decide integrated lighting before panels are machined — see integrated cabinet lighting.

Working with an overseas factory without losing control

The concern buyers raise about importing joinery is rarely the freight; it is accountability. Our custom and OEM service covers bespoke dimensions, finishes and hardware, prototyping for repeat hotel types, and private labelling where a developer or brand wants their own name on the package. A single coordinator holds the drawings, production schedule, packing list and delivery, so you are not chasing four parties.

We also supply the finishes around the bar — matte lacquer panels, engineered oak flooring, vanities and lighting — which is where one supplier starts to pay for itself. A bar unit ordered as part of a whole-apartment fit-out matches the wall paneling and wardrobe range from the same production run, instead of being matched by eye months later.

Getting a quotation

Send drawings or photographs, room dimensions and your finish schedule to our team, and we will come back with a specification, price and production schedule for review. If you are still deciding between configurations, the Furniture Series catalogue shows what each bar cabinet type looks like in a completed interior.

Figures, materials and hardware shown on product pages are indicative; dimensions, finishes, freight terms and warranty arrangements are confirmed for each order at drawing-approval stage.