An outdoor swim spa arrives as one of the heaviest items in a furnishing order: Outdoor Swim Spa WS-S38 is a moulded acrylic shell carrying pumps, jets, a control system, lighting and a waterfall assembly. The shell rarely breaks in transit; the equipment mounted on and inside it does. Before production starts, buyers should settle the packaging plan in writing, because that plan decides how the spa is handled at the factory gate, at the port and at the site.

SANTERSON’s logistics service covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery. More detail is on the Furniture Logistics and Door-to-door Delivery page. The points below are what to confirm for this particular product type.

1. Whether the spa ships as one shell or in sections

Catalogue dimensions for WS-S38 are 3760 × 2080 × 1110 mm, which is what determines the container option and the handling equipment needed at both ends. Confirm with the factory whether the unit travels as a single assembled shell or in sections, and get the packed (crated) dimensions and gross weight rather than the catalogue water-fill size. Packed size is what your freight forwarder quotes on and what your site access plan must clear.

2. How the shell is supported and protected

A large acrylic shell fails when it is supported at the wrong points. Ask for a description of the base support — timber skid or pallet footprint, its position under the shell, and whether the weight sits on the structural frame rather than on the shell surface. Then confirm edge protection on the rim and steps, cushioning between the shell and any timber contact, and a moisture barrier if the crate will sit outdoors at a port. Water-based testing residue inside the shell also needs to drain before crating; a sealed wet shell arriving in hot climates is a smell and hygiene problem, not a cosmetic one.

3. How pumps, jets, filters and the control system are packed

WS-S38 is specified with multiple water pumps, a filter pump, dozens of jets and water columns, LED lighting and a control unit. Loose hardware inside an empty shell will shift during ocean transit and damage fittings. Confirm that electrical and hydraulic components travel in separate labelled boxes, that glass and acrylic parts are suspended or blocked so they cannot move, and that each box is marked against the assembly drawing. Ask whether loose accessories such as steps, insulation panels and optional heat pump or UV sterilisation units are shipped with the spa or on a separate consignment.

4. Container type and loading plan

Confirm whether the spa goes in a standard container, a high-cube or an open-top, and who provides the lifting gear at destination. If the spa shares a container with other goods — pool and spa products alongside outdoor furniture or bathroom ceramics, for example — ask for the loading sequence so the spa is not buried under lighter cartons. A written loading plan also supports any insurance claim if goods are found crushed.

5. Documentation that travels with the crate

The packing list should match what is actually in each box, item by item, so your receiving team can sign for a delivery without opening everything. Commercial invoices, certificates of origin and any import paperwork required at destination should be agreed in advance, along with cargo insurance terms. Where the crate carries more than one consignment, ask for carton numbering that matches the packing list exactly.

6. Unloading and site access

A spa delivered to a gate is not delivered to a deck. Confirm the delivery vehicle and whether a crane, forklift or manual carry is needed at site, and keep the crate intact until the spa has reached its final position. Open it only with the assembly drawing on hand, photograph any damage on the crate before unpacking, and check the shell for stress marks along the support points.

Get the packaging plan approved before production

Packaging is cheapest to change at the quotation stage. Ask the supplier for a packing method statement with photographs of the crating, agree who signs it off, and put the agreed method into the order confirmation. SANTERSON works on custom and OEM projects across furniture and building materials — see Custom Furniture Manufacturer — so a configuration that differs from catalogue standard, such as added insulation or a different filtration option, needs its packaging confirmed separately.

Send your site photos, access constraints and container preference with the enquiry, and we will confirm the packing method, crated dimensions and gross weight for the exact WS-S38 configuration you are specifying.