A single aluminum outdoor dining set & bar table stool set with teak accents rarely arrives alone on a hospitality or villa job. It usually sits beside loungers, daybeds, a pergola and sometimes a swim spa, all specified by the same consultant at roughly the same time. That is where budgets slip: the dining suite itself is priced properly, then the matching items around it are quoted late, in different materials, and the frame finishes no longer line up. The notes below describe how we scope and price this product family as one package, so a purchasing team can compare like with like before the order is placed.

Start from the zones, not the SKUs

Before any quantity is entered on a bill of quantities, walk the drawing and mark where people actually sit, stand and queue. On a resort terrace that normally means three or four distinct settings: a seated dining area, a standing bar edge with stools, a lounge or shade zone, and a circulation path that has to stay clear. The product page for this series describes it as a matching suite — a rectangular dining set plus a high bar table with stools, sharing the same aluminium sled-base chair structure and teak decorative details. Because both halves already share one frame design, they are the natural anchor for the whole terrace: decide their quantities first, then let everything else be chosen against them.

This matters commercially. Quantities drive container count, and container count drives freight. If the bar stools are added three weeks after the dining set has gone into production, they travel separately or hold up a whole shipment. We ask clients to freeze zone quantities before the first deposit, even if finishes are still open.

What actually moves the price of this suite

Once the configuration is fixed, four variables do most of the work on the quotation. Each one can be adjusted without changing the look of the terrace:

  • Table dimensions. The detail copy states that table dimensions can be adjusted for hospitality project requirements, so seat count per table is a specification choice rather than a fixed catalogue limit. Fewer, longer tables usually cost less per seat than many small ones, but they need more clear floor space and make the room read as formal.
  • Cushion fabric. Cushion fabrics are also adjustable on this series. Contract-weight fabric on every chair raises the unit price; reserving cushions for dining chairs and leaving bar stools frame-only is a common way to hold a budget line without touching the silhouette.
  • Frame colour. Frame colours can be matched across the terrace, which is what keeps dining chairs and a distant pergola reading as one scheme. Fixing one colour code early prevents the near-misses that appear when items are ordered in separate batches.
  • Teak detailing. Teak appears here as decorative detail rather than as the structural material; the structure is aluminium. Where a project needs to protect a budget, keep teak on tabletops and arm caps and use powder-coated aluminium on large flat surfaces.

A practical rule: price the standard configuration first, then ask for one alternative at a time. Comparing three configurations quoted on different assumptions is how budgets become unreliable.

Building the rest of the package around the dining suite

Once the dining and bar quantities are locked, the adjacent items can be selected against the same frame finish and the same teak accent. On our catalogue these sit close by, and each one answers a different zone:

Grouping them this way is what we mean by one-stop procurement: SANTERSON furniture and building materials are produced under the same roof, so a pergola, a lounger frame and a dining chair can be sent to the same powder-coating line and come out with one colour code. That is the cheapest form of quality control on a multi-product job — it removes the matching argument before it starts.

Reading the quotation you receive

A usable quotation for a multi-product outdoor package shows, line by line: item name and dimensions; frame finish code; tabletop and accent material; cushion fabric reference; quantity; unit price; and packing data with carton count and total volume. If any of those are missing, the comparison you make against another supplier is not a comparison.

Three checks we would apply to any supplier's paperwork, ours included:

  • Packing and volume. Total cubic metres decides whether the package fits one container or spills into another. Ask for it before you commit to a delivery date.
  • Trade terms. The same package can look cheap ex-works and expensive at the site door. Our logistics service covers sea, air and rail freight forwarding with customs paperwork and door-to-door delivery; the Incoterms, duties and insurance applicable to your port are confirmed per project rather than assumed.
  • Spare parts. Cushion covers, teak detail pieces and stool feet wear first. Confirm what can be reordered later and at what minimum quantity, so a replacement order does not have to match the original production run.

Phasing an order without paying twice for freight

Most projects cannot take everything in one delivery. The usual sequence is: long-lead structural items first — pergola, swim spa, anything fixed to the building; then frames and tables; then cushions, umbrellas and soft goods last, so they are not sitting on site through the construction phase. Splitting an order this way is fine as long as the finishes are specified once, at the start, and each release references the same colour and fabric codes.

Our cooperation steps follow that logic: project brief and design proposal, then quotation and detail confirmation, then production, shipment and follow-up. Custom work — bespoke dimensions, finishes, OEM manufacturing — goes through prototyping before batch production, which is where dimension changes are cheap. Change the same dimension after the batch has started and you are paying for both.

A short scoping checklist

  • Zone drawing with seating counts marked, signed off before quantities are quoted
  • Dining tables and bar set fixed first, since they share one frame design
  • One frame colour code applied across pergola, loungers and dining frames
  • Teak detailing limited to touchpoints: tabletops, arm caps, bar edges
  • Pergola position confirmed before bar table quantities are finalised
  • Swim spa or water feature on the same schedule as the furniture, not after it
  • Packing volume obtained before the delivery date is agreed
  • Spare-part reorder terms in writing with the order confirmation

If you already have a drawing and a target zone count, send them over. We will price the dining and bar suite first, show what the matching pergola, loungers and swing benches add, and put the whole package on one schedule with one finish code. Enquiries go through our contact page; tell us the project location and the number of covers you need per zone, and the specification conversation starts from something concrete.