A run of glass shelves looks simple on a drawing: a few transparent planes, some brackets, and a clean line along the wall. In production it is one of the least forgiving items in a fit-out package. Glass carries its own load limits, its edges stay visible from every angle, and a shelf that is 15 mm out will not quietly hide it on site. Confirming the details below with us before we cut anything turns glass shelving into a straightforward production item instead of a change order.
1. What the shelves are actually carrying
Load is the first thing to settle, because it drives thickness, span and support type. A shelf holding folded towels behaves very differently from one holding ceramic vessels, glassware or a row of hardback books. Tell us:
- What goes on each shelf, and roughly how heavy a full shelf will be.
- The clear span between supports — the longer the unsupported run, the thicker or more frequently supported the glass needs to be.
- Whether anyone will lean on it, stack onto it, or reach across it in a shared bathroom or lobby.
We then set the glass thickness and support spacing for that duty. If you have a load expectation from a consultant or a client, send it as written; we work to stated figures rather than guessing at them.
2. Where the shelf sits and what it is fixed to
Glass shelving only performs as well as its fixing substrate. A specification that reads fine on paper can fail at installation if the wall behind it was never planned for.
| Point to confirm | Why it matters before production |
|---|---|
| Wall build-up at the fixing line | Tile, plasterboard, timber stud, brick or a cavity each need different fixings and blocking. Timber noggins are far easier to add during fit-out than after tiling. |
| Position of tiles, joints and waterproofing | Drilling through a tiled, tanked wet wall needs the setting-out agreed in advance so penetrations land in the right places. |
| Reveal, niche or recess dimensions | Niche shelving has to match the opening it lands in. Finished — not structural — dimensions are what we need. |
| Clearance from basins, showers and doors | Sets shelf depth and prevents elbows, splash zones and door swings conflicting with the glass. |
Send finished-level drawings and setting-out plans. Where a project is still at design stage, our team can coordinate the fixing detail with your builder or joiner before we quote.
3. Glass type, edge treatment and finish
Glass shelves are specified by a handful of choices that all change price and lead time, so it is worth locking them early:
- Glass make-up — toughened single glass or laminated safety glass, depending on the duty and where the shelf sits.
- Edge profile — polished flat edge, bevelled or rounded. On frameless glass every edge is in view, so this is a visual decision as much as a technical one.
- Tint and appearance — clear, low-iron for a neutral look, bronze, grey or smoked. Tint also changes how much of what sits behind the shelf you see.
- Cut-outs and drilled holes — all machining must be done before toughening. Once glass is tempered it cannot be re-cut or drilled, so brackets, cabling and integrated lighting have to be designed in from the start.
- Hardware finish — brackets, standoffs and frames should match the ironmongery schedule for the project.
If you want lit shelving, say so at specification stage. Our shelving accessories range covers the brackets and complementary fittings that go with these units, and lighting routes need to be planned around the glass cut-outs rather than added afterwards.
4. Dimensions we need before we produce anything
The most common cause of delay on custom shelving is incomplete dimensional information. For each shelf run, please provide:
- Width and depth of every shelf, plus the vertical spacing between shelves.
- Total height of the run and its height from the finished floor level.
- Offsets around obstacles: mirrors, basins, shower screens, skirting, cornices, skirting returns and pipework.
- Whether corners are mitred, returned or butt-jointed where runs change direction.
- The quantity per room or unit, and which rooms or units each set belongs to.
For multi-unit projects, a simple room-by-room schedule is enough to start. We produce a shop drawing from it for your sign-off before cutting glass — that drawing is the document worth spending time on.
5. Consistency across the rest of the fit-out
Glass shelves rarely stand alone. In a bathroom or dressing area they sit next to vanities, mirror cabinets, wardrobes and wall panelling, and mismatched finishes between those items are obvious in photographs.
Because we work as a one-stop furniture and building materials supplier, the same project file can cover shelving together with the joinery, wardrobes, wall panels and sanitary fit-out around it. That means one set of dimensions, one finish schedule and one production run — which is where the practical savings sit on multi-room projects.
If your drawings come from a designer rather than a manufacturer, our interior design services can turn them into production-ready details, including 3D views for approval before manufacture begins.
6. Packing, delivery and site handling
Glass is the item most likely to arrive with a problem if packing is an afterthought, so we treat it as a specification point rather than a logistics detail:
- Crated, cushioned transport with each pane individually protected and clearly labelled to its room.
- Spares policy agreed for breakages in transit — worth putting in writing on large orders.
- Delivery sequence matched to site readiness, so shelves arrive when the walls they fix to are finished.
- Freight by sea, air or rail with customs paperwork handled through our logistics and door-to-door delivery service.
Tell us who receives goods on site and what access they have. Narrow stairwells and upper-level apartments change crate sizes, and it is cheaper to know that before crating than after.
7. Installation responsibility and sign-off
Decide early who fixes the glass: your builder, our installers, or a split arrangement. Then confirm:
- Who prepares the substrate and installs blocking or reinforcement.
- Who supplies and fits the brackets and standoffs.
- Which trades are finished before glass goes in — painting, tiling, electrical and joinery all need to be complete.
- The inspection and snag process at handover, with our installation and after-sales support covering fitting and follow-up where that scope is included in the order.
A dated site programme showing when each room is ready for glass prevents the classic problem of panes arriving to a wall that is still three weeks from being finished.
Quick pre-production checklist
- Intended load and clear span per shelf
- Wall build-up, fixing substrate and blocking detail
- Glass make-up, thickness, tint and edge profile
- All cut-outs and drilled holes finalised before toughening
- Finished dimensions and room-by-room schedule
- Hardware finish matched to the ironmongery schedule
- Packing standard, spares policy and delivery sequence
- Named installing party and site readiness dates
Send us the drawings you already have — even a marked-up plan with dimensions is enough to start. We will come back with a shop drawing and a specification for your approval before any glass is cut.
Can glass shelves be adjusted on site if the wall is out?
Toughened glass cannot be re-cut or drilled on site. That is why we require finished dimensions and produce a shop drawing for sign-off before manufacture, and why adjustable brackets matter where substrates are uneven.
Do you supply glass shelving with matching wardrobes and vanities?
Yes. Shelving is produced alongside the cabinetry, wardrobes and wall panelling for the same project, so finishes and dimensions are coordinated from one production package.
What information speeds up a quotation?
A room schedule with shelf widths, depths and spacings, the intended loading, wall type, and your preferred glass tint and hardware finish. With those six items we can usually quote without further questions.