Classic paneled doors read well on a rendering, but the panel profile has to survive contact with a real room: uneven floors, out-of-square walls, ceiling services and an opening that never quite matches the marked dimension. That is where make-to-measure joinery earns its place. The Classic Paneled Solid Wood Wardrobes in our Solid Wood Wardrobes collection are supplied with made-to-measure sizing, material and finish options and a layout tailored to each project, so the drawing you approve is the unit that ships.

Why paneled wardrobes expose every measurement error

A frame-and-panel door carries a visible moulding line. When a carcass is trimmed to force a fit, that line stops running true with the skirting and the ceiling shadow gap, and no amount of decoration hides it. A wardrobe wall in a villa or apartment usually runs floor to ceiling and meets three difficult conditions at once: a slab that varies across its span, plastered walls that are not parallel, and cornices or lighting tracks that must remain unbroken.

Panel construction also behaves differently from a flat laminate front. Solid timber components move with the moisture content of the room they live in, so the tolerance built into a door and its frame is decided where the unit will be installed, not where it is stored or shipped. This matters most when the same project also specifies engineered European oak flooring and wall panelling: doors, skirting and panels should be surveyed against one common set of levels and datums, otherwise each trade compensates for the others on site.

Reading the design drawing before you quote

Before a price is issued, we ask for the same information every joinery package needs. Missing items are what turn a fixed order into change requests.

  • Room elevations for every wall the joinery touches, with overall height and width marked from a stated finished-floor level.
  • Section details at the ceiling line: cornice profile, shadow gap, recessed lighting or curtain track positions, and any sprinkler or air diffuser that must stay accessible.
  • Door opening direction and clearance. A hinged paneled door needs swing space; a sliding arrangement needs a pocket or an overlap allowance.
  • Internal layout per bay: hanging heights, drawers, shelves, trouser rails, vanity bench or safe position, plus the garments actually being stored.
  • Finish schedule: timber species and cut, stain or lacquer sheen, and a written note on whether adjacent items are meant to match exactly or sit as a deliberate contrast.
  • Ironmongery schedule with the loading of each drawer and door, so runners and hinges are specified rather than substituted later.

Where drawings come from an architect or joinery consultant, we check them against the site condition rather than assume they already reflect it. Where a client has no detailed drawings, our design team can produce space planning, layouts and 3D renderings for approval before production starts. See Interior Design Services for how that stage runs.

Site verification: what we measure on the day

A survey is not a repeat of the drawing. On site we record:

  • Floor level at several points along the run, and again at each end, so plinth heights can be stepped or scribed instead of cut down.
  • Wall verticality and the distance between side walls at high, middle and low points, because a wall that tapers changes carcass depth from one end of the run to the other.
  • Finished floor-to-ceiling height net of any ceiling build-up, plus the position of skirting, architraves, switches, sockets and radiator tails.
  • Door and window reveal depths, and whether handles will foul a window handle or a light switch when opened.
  • Access route from the street to the room: lift car dimensions, stair turns, corridor widths and the largest single piece that can physically be delivered.

That last point decides whether a wall of joinery arrives as one large carcass or as modules joined on site. Modular construction with a scribed filler is usually the safer answer in apartments and upper floors, and it also lets the run be adjusted by a few millimetres during installation without re-machining a panel.

Aligning the wardrobe with the rest of the fit-out

A paneled wardrobe rarely stands alone. In whole-house work we coordinate it against the other timber elements so the species, grain direction and sheen are consistent across the scheme, or intentionally different where the design calls for it. Two of our completed custom projects show how that coordination is handled on drawings:

If doors, panelling and wall panel systems come from different suppliers, each one finishes its own edge and the joints show. Sourcing them together means one party owns the setting-out drawing and the junction details.

Confirmations to sign off before production

We hold production until these are confirmed in writing, and we ask buyers to insist on the same from any joinery supplier:

  1. Survey drawings issued as shop drawings, dimensioned and signed, showing the agreed finished sizes rather than nominal ones.
  2. A physical or printed finish sample for the panel face, the frame and any glass or metal detail, checked under the room's own lighting.
  3. Internal layout confirmed against the client's storage requirements, not a generic template.
  4. Ironmongery, drawer runners and any integrated lighting named by make and model on the order.
  5. Delivery sequence agreed with the site programme, so the joinery lands after wet trades have dried and before flooring is laid where that is the intended order.

Our Custom & OEM Service covers bespoke material, finish and texture choices alongside made-to-measure sizing. The service page also lists flexible minimum order quantities, so a single villa bedroom and a multi-unit package can both be specified properly.

Delivery, installation and the snag list

Freight is arranged by sea, air or rail with export paperwork handled for you under Logistics & Door-to-Door Delivery; import duties and local conditions are confirmed case by case for each destination rather than assumed. On arrival, installation and inspection fall under the scope described on Installation & After-sales Support, which also covers spare parts for later maintenance.

At handover we walk the room with the site team and check the things that decide whether a paneled wardrobe looks built-in or bought in:

  • Doors hung parallel, with an even reveal on every stile and no rub at the top or latch edge.
  • Panel mouldings running level and in line across adjacent doors, including across any scribed filler.
  • Crown and plinth junctions tight to wall and ceiling, with no visible packing steps.
  • Drawners running freely under load and closing flush.
  • Finish free of handling marks after installation, with protective film removed and the room left clean.

Send us the drawings and the room

If you have elevations for a bedroom wall or a full joinery schedule, send them through with the site location and programme; we will review them against the conditions above and come back with shop drawings and a quotation. If the project is at concept stage, start with Contact Us and we will arrange the survey first.

SANTERSON is a China-based furniture and building materials manufacturer supplying villa, hospitality and office projects, with made-to-measure joinery coordinated as one package from design through delivery and installation. Explore the built-in furniture range to see which wardrobe families suit your scheme.