Outdoor kitchens, poolside bars, terrace pantries and resort wet areas put cabinetry under conditions that indoor joinery is rarely asked to survive. When we receive an enquiry for Santerson Outdoor Ready PVC Cabinets, the briefs that come back fastest and cleanest share one thing: they state, line by line, what the buyer has already decided and what still needs to be confirmed. This guide sets out the sections we suggest you include in that brief, so quotations, drawings and production approvals move through fewer rounds.
Start with the location, not the door style
Before anything else, write down where the cabinets will physically stand. A unit on a covered verandah, a unit beside an uncovered pool, and a unit inside a beachfront villa's open-plan kitchen all sit in the same product family but face different moisture, splash and sun exposure. Our product page describes this design as part of the PVC Kitchen Cabinet collection with made-to-measure sizing, material and finish options, and a layout tailored to the project; it does not publish a single fixed specification for every site. That means your location note is what drives the conversation about construction, hardware grade and finish selection.
In the brief, describe the installation position in practical terms: shaded or exposed, covered or open to rain, distance from water features, whether the area is hosed down, and whether the cabinets sit against a tiled wall, a rendered wall or an external cladding system. If you are working on one of several villas or guest suites, list each location separately rather than assuming one detail applies to all of them.
Give dimensions as a range first, then as fixed openings
Made-to-measure work only becomes cheap and fast when the numbers arrive in the right order. For an early enquiry, a room sketch with overall run lengths, ceiling heights and any obstructions is enough to price indicative layouts. For production approval, we need finished-floor-to-finished-ceiling dimensions, the position of waste pipes, gas points, power outlets and appliance recesses, plus the floor finish build-up if tiling has not yet been laid.
- Overall run length in millimetres, with left-hand and right-hand ends identified
- Unit height and depth, plus whether plinths or legs are required
- Appliance schedule: model numbers, cut-out sizes and ventilation clearances
- Countertop material and edge profile, if the tops are supplied with the cabinets
- Any fixed openings for sinks, grills, fridges or ice makers that cannot move
Dimensions and selected specifications should be confirmed for each project before production starts. Where site dimensions are still moving because civil works are unfinished, say so in the brief and mark which runs you want quoted provisionally.
Name the finish you want, and the samples you need to see
The PVC Kitchen Cabinet range covers a broad spread of surface treatments, so it helps to reference the look by name. If your design intent leans towards a soft, low-sheen front, our matte pvc cabinets page is a useful starting point for that family of finishes; if the scheme calls for a reflective front that reads as part of a polished interior, see High Gloss PVC Cabinets. For layouts where you want display rather than closed doors, Santerson Glass Front Pvc Cabinet shows how glazed fronts are handled in the same collection.
State in the brief whether you require physical samples before order confirmation, and who on your side will sign them off. Colour names from another manufacturer's palette are helpful as references but should not be treated as an exact match; a sample reference number avoids that ambiguity entirely.
Specify the layout decisions the drawings depend on
Layout is where most revision rounds are created. Rather than asking for "a kitchen", give the drawing team the constraints: door swing direction, whether you prefer handleless fronts or a profile handle, drawer versus shelf storage in base units, and how tall units should be positioned relative to traffic flow. For outdoor bars and poolside servery points, also note waste and water supply access, because plumbing chases change carcass widths.
If the same layout repeats across multiple units or villas, say which items are identical and which vary. Repeating a confirmed module across a development is usually the simplest way to hold both cost and lead time steady.
Cover supply scope and coordination in writing
A procurement brief should make clear what you expect from the supplier and what your local trades will handle. As a one-stop furniture and building materials supplier, SANTERSON works across design consultation and space planning, material selection and product specification, manufacturing and quality control, project management and site coordination, then installation and handover — so cabinetry rarely arrives as an isolated purchase on our projects. Where a villa or hospitality fit-out also needs engineered flooring, wall panels, lighting, wardrobes or bathroom fixtures from the same programme, grouping them in one brief reduces the number of separate approvals your consultant has to chase.
Include in the brief: the delivery address and who receives goods on site; whether you want door-to-door delivery handled for you; any import documentation your customs broker requires; and the inspection process your team will apply on arrival. Also record who is responsible for on-site installation, snagging and any warranty registration, so those responsibilities are agreed before the containers ship rather than after.
Add the approvals and dates that shape production
Finally, list the decision gates. Which drawings need a client or architect signature? Is there a sample sign-off date? When must goods land on site, and are there quiet-hours or access restrictions affecting delivery? A brief with these dates lets us schedule prototyping, production and freight backwards from your handover instead of forwards from the enquiry.
If you would like a specification review before you issue your tender pack, send the location notes, dimension ranges and finish references you already have to our project team. We will confirm which details are sufficient to quote and which need a site measurement before production approval.