A single outdoor swim spa is easy to price. The same spa inside a villa or resort package, where pool equipment, deck furniture, shading structures, bathrooms and finishes are all moving at once, is where budgets start to leak. This guide uses the Outdoor Swim Spa WS-PC03 as the worked example and walks through how to scope it properly and where its cost sits relative to the rest of a multi-product order.
What the catalogue already fixes for you
Before any budget line is written, separate what is settled by the published specification from what still has to be decided per project. For WS-PC03 the published catalogue entry gives a shell of 3000 × 3000 × 1000 mm, one control system, one water pump, one filter pump, 50 jets with 4 water columns, one LED light and a total power figure of 2.75 kW, with water jets, LED lighting and ozone shown as the featured functions.
| Item | Catalogue entry for WS-PC03 |
|---|---|
| Shell size | 3000 × 3000 × 1000 mm |
| Control system | 1 set |
| Water pump / filter pump | 1 pc each |
| Jet package | 50 jets, 4 water columns |
| LED lighting | 1 pc |
| Total power | 2.75 kW |
| Swim training system | Not listed for this model — confirm before assuming one |
Two things in that table matter more than they look. First, the 2.75 kW figure is a total-power line from the catalogue page, not an electrical design value. Second, no swim training system is listed for WS-PC03. If the client brief calls for counter-current swimming, that requirement changes which model belongs on the order, and it should be resolved before any budget is signed off rather than treated as an add-on later.
The four cost buckets a swim spa actually creates
In a project estimate, the unit price of the shell is only one line. Four separate cost areas appear once the spa enters a real building or landscape package.
- Base configuration. Shell, control system, pumps, jets and lighting as specified in the catalogue entry.
- Optional equipment. The range lists control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps as options. Each is a decision with a price, not a default inclusion.
- Site works around the unit. Foundation or deck support, access for delivery, drainage, and the power supply sized to the selected configuration.
- Operating assumptions. Heating and filtration duty depend on insulation, heat pump selection and how the spa is used; these belong in the client's running-cost discussion, not buried in a purchase order.
Where WS-PC03 sits inside the swim spa range
Because shell size, jet count and pump quantity all move between models, comparing those physical lines across the catalogue gives a more reliable sense of scale than any single price. Note that the total-power figures on these pages do not track size in a simple way — a larger shell can carry a lower power line than a smaller one — so treat each model's power figure as its own data point rather than something you can interpolate. The table below is transcribed from published product pages and is meant as a relative reference for footprint and jet count only.
| Model | Catalogue dimensions (mm) | Water pumps | Jet total | Total power |
|---|---|---|---|---|
| WS-PC01 | 3000 × 1050 (as listed) | 2 | 53 | 6.65 kW |
| WS-PC02 | 3000 × 3000 × 1050 | 2 | 60 | 7.35 kW |
| WS-PC03 | 3000 × 3000 × 1000 | 1 | 50 (with 4 water columns) | 2.75 kW |
| WS-PC04CH | 4500 × 3000 × 900 | 1 | 46 | 2.45 kW |
| WS-PC07A | 7000 × 3000 × 1470 | 4 | 62 | 9.55 kW |
| WS-PC08U | 8000 × 3000 × 1500 | 4 | 33 | 11.85 kW |
Read as a package, the pattern is useful: WS-PC03 carries a jet count close to the larger hydrotherapy models while running on a single water pump in a square 3 m footprint. That combination makes it a reasonable fit for a compact terrace, villa courtyard or a spa treatment room where floor area is tight and the electrical supply has not been upgraded specifically for a pool.
If the brief instead calls for a longer swim channel with a separate relaxation zone, look at the Long Outdoor Swim Spa with Hydrotherapy & Relaxation Pool, and where the specification does require counter-current swimming, models carrying a listed swim training system such as the Outdoor Swim Spa WS-PC08T are the ones to price. For spas that must follow a design language rather than a catalogue footprint, the Customizable Shape Outdoor Spa covers square, round, oval and curved layouts in an acrylic shell.
Scoping the spa against the rest of the outdoor package
The real saving in a one-stop order comes from specifying the pool zone as one coordinated set rather than several unrelated purchases. Once the spa footprint is fixed, three adjacent decisions become much easier to lock down at the same time.
Poolside seating and lounging
Poolside furniture faces the same exposure as the spa — splash, sun, and in resort settings chlorine and salt air — so it should be specified with the same material logic. The Aluminum Sling Sun Lounger Collection is built for high-use pool decks, with quick-dry mesh and static, wheeled or folding bases chosen to suit the layout. Where a project needs statement pieces rather than volume seating, the Aluminum Cabana Daybed Collection offers either a louver roof for sun and rain control or a soft canopy with privacy curtains.
Shade and shelter around the water
A spa used outside peak summer needs somewhere to dry off and sit. A Motorized Louvered Aluminum Pergola with built-in LED strips and optional zip screens can be sized to the spa deck, with bay dimensions, frame colour and screen transparency adjusted to the design. The Double Roof Hardtop Aluminum Gazebo is the alternative where a fixed, ventilated roof and enclosed privacy are preferred over adjustable louvers.
Indoor connection: bathrooms and finishes
A spa that opens onto the interior drags bathroom specification into the same conversation. Shower sets such as the Gun Grey Digital Display Rain Shower System and matching ceramics are ordered against the same room list, and interior finishes such as European Oak Herringbone Engineered Wood Flooring need to be reviewed alongside wet-area detailing rather than after it.
A scoping checklist to settle before you request a quotation
Confirm in writing, model by model:
- Which equipment is included in the quoted configuration and which items — UV sterilization, heat pump, sand filtration, insulation, steps — are priced separately.
- The electrical supply available on site, and whether the selected configuration can be connected to it without an upgrade.
- Access route and lifting requirements for delivery to the terrace, courtyard or roof level.
- Who prepares the supporting base or deck, and who inspects it before the unit arrives.
- Whether a swim training system is required; if it is, that the model quoted actually lists one.
Confirm for the package as a whole:
- One consolidated order covering pool equipment, outdoor furniture and shading, so freight and container loading are planned once instead of per supplier.
- A single specification sheet numbering every item, so substitutions are visible rather than absorbed into a revised total.
- Sequenced delivery, with the spa arriving after its base is ready and furniture after the deck is finished.
- Named responsibility for installation, inspection and handover across all trades involved.
Sourcing through a one-stop furniture and building materials supplier makes that consolidation practical rather than theoretical. Our project workflow covers design, custom and OEM production, logistics, installation and after-sales support, and the custom and OEM service handles bespoke dimensions, finishes and materials where a standard catalogue footprint does not fit the site. Freight planning — packaging, container loading, documentation and door-to-door delivery — is arranged in the same cycle as production, which is what keeps a multi-product order to one delivery window instead of several.
Send us the spa location, the available power supply and the list of adjacent items you already intend to order. We will come back with a configuration for WS-PC03 or the model that genuinely matches your brief, priced against the rest of the package so you can see the whole number before anything is committed.
All dimensions, jet counts, pump quantities and power figures quoted above are transcribed from published product pages and describe catalogue configurations. Included equipment, electrical requirements and optional accessories vary by configuration and must be confirmed for the specific order before it is placed.