A gold mirror laser-cut screen looks flawless in the render and disappointing on site — a pattern that reads differently under lobby lighting, a panel that will not line up with the ceiling grid, a finish that scuffs during installation. Because these partitions are fabricated to your drawing rather than picked from a catalogue, everything after the purchase order is decided by agreement, not by stock. Before you confirm an order for a Custom Gold Stainless Steel Laser Cut Decorative Screen Partition, ask your supplier to answer the questions below in writing.

1. What exactly is covered, and for how long?

"Warranty" on a custom metal screen can mean very different scopes. Ask which of these are named in the document and for what period:

  • The cut panel itself — burrs, warping, weld points on framed assemblies, edge integrity after cutting.
  • The surface finish — colour stability of the gold tone, adhesion of the plating or coating, resistance to lifting where the panel is fixed or cleaned.
  • The frame, brackets and any fixings supplied with the panels.
  • Transport damage versus on-site damage, since these two are frequently argued about later.

Also ask what voids it. Site cutting, on-site welding, changing the fixing method, or cleaning with an abrasive product are the usual reasons a finish claim stops being valid. Get the approved cleaning method stated in plain words.

A practical test: if the warranty wording cannot name the part, the fault and the remedy, it is marketing language, not a term you can rely on at handover.

2. What happens when a panel arrives damaged or out of tolerance?

Laser-cut screens travel badly if they are packed loosely, and a single replacement panel has to match the pattern, the finish batch and the hole positions of everything already installed. Ask:

  • How damage is reported — photographs within how many days of delivery, and who pays for the replacement shipment.
  • Whether a matching spare panel or two can be produced at the same time as the main order, so a breakage on site does not restart production. For a multi-panel wall this is often the cheapest insurance in the whole project.
  • How finish consistency is guaranteed across a re-run. Gold tones drift between batches; ask whether the replacement will come from the same batch or be matched to your installed sample.

3. Who supports installation, and who is responsible for the wall?

A screen only performs as designed if the substrate carries it. Confirm in writing:

  • Whether fixing details and a setting-out drawing are supplied with the panels, and whether they show bracket positions, panel joints and clearances at skirting and ceiling lines.
  • Whether installation is done by your contractor following supplier instructions, or supported remotely — video guidance, an assembly sequence, numbered panels and labelled fixings all reduce site errors.
  • Where the responsibility boundary sits. The supplier stands behind the panel and its fixing system; your builder stands behind the flatness and load capacity of the wall behind it. Agree a tolerance for the substrate before production, because a bowed wall will show through a rigid metal screen.

4. What is inspected before the panels leave the factory?

Ask for a pre-shipment inspection pack rather than a promise: photographs of the finished panels against a dimension reference, a dry-fit of at least one joint where two panels meet, the packaging method, and the marking system on each crate. On a feature wall in a hotel lobby or reception, this is the point at which a pattern error is still cheap to fix.

5. How are change requests handled after production starts?

Custom work changes late — the lighting is revised, the wall length moves by 300 mm, the finish sample is swapped. Ask what a post-release change costs and how it is quoted: re-cut panels only, or new setup as well; whether an already-produced panel can be modified or must be remade; and how the revised order affects the shipment. Getting this answer early stops a small design revision from becoming a claim against the whole delivery.

6. What support exists after handover?

Screens in public areas get touched, leaned on and cleaned weekly. Ask whether replacement panels can be reordered later to match an installed wall, how long the pattern file and finish record are kept, and who you contact when a problem appears — one named coordinator through design, production, shipping and installation is worth more than a general inbox.

If your project repeats the same metalwork elsewhere, ask whether one supplier can produce the related pieces in the same finish, such as a gold mirror screen with rose gold accents for an elevator lobby or a laser-cut metal partition for the reception area. One finish batch across several locations keeps tones consistent and puts every claim under a single agreement.

A checklist to take into your supplier call

  • Warranty scope: panel, finish, frame, fixings — each with a period and named exclusions.
  • Approved cleaning products and method for the gold finish.
  • Damage reporting window and who covers the replacement plus freight.
  • Spare panels ordered with the main batch, matched to the same finish run.
  • Setting-out drawing, bracket positions and substrate flatness tolerance.
  • Pre-shipment inspection photographs and crate marking system.
  • Written change-order pricing after production release.
  • Pattern and finish records retained for future reorders; one named contact through the project.

Frequently asked questions

Should warranty terms sit in the purchase order or a separate document?

Put them in the order confirmation or a specification attached to it and signed with it. A separate sheet referenced only in correspondence is the first thing that disappears during a dispute.

How many spare panels should I order?

Order spares against risk, not a fixed number. A wall of many narrow panels in a public area carries more breakage and cleaning wear than a two-panel screen behind a reception desk, and the spares must come from the same finish run to match.

Do these questions change for villas versus hotels?

The scope does. A private villa usually needs a clear finish warranty and cleaning guidance; a hotel also needs the pattern file retained for future expansion, plus documented fixings that survive daily housekeeping.

SANTERSON fabricates custom laser-cut stainless steel screens to your drawing or reference image, with pattern, size, thickness and finish set to the project. Enquiries receive a reply within 24 hours during business hours (Monday–Saturday, GMT+8).