A quotation for floating shelves often arrives as a single line item: a product name, a length, a finish code and a price. Two proposals that look identical on that line can carry very different amounts of work behind them. Before you compare prices across suppliers, it is worth reading each proposal for what it actually commits to — because the differences show up later as change orders, site problems and delays.
Start With What the Proposal Is Actually Supplying
Floating shelves sit in more than one product family, and a manufacturer may be quoting from any of them. A wall-mounted shelf fixed to a single room’s wall is not the same piece of work as a modular system that runs across several rooms with shared modules, finishes and hardware. Our own catalogue separates these: Floating Shelves in the Open Shelving collection, and Floating Modular Shelves within the Modular Shelving Systems collection.
Ask which one you are being quoted, and ask for it by name on the document. If two suppliers answer the same enquiry with different families, their prices are not comparable until the scope is aligned.
Check Whether the Dimensions Are Yours or Theirs
A proposal that lists standard sizes may be offering a catalogue item you are expected to make fit. A made-to-measure proposal states dimensions derived from the actual space, and it should say so. For project work we configure shelving to the room: size, layout, material and finish are specified per project rather than picked from a fixed grid.
What to look for in writing:
- Overall width, depth and projection for each unit, not one generic figure for the whole run.
- Vertical spacing between shelves, and whether it is fixed or adjustable.
- Where the units sit relative to sockets, switches, windows, tiling lines and any existing joinery.
- Whether the dimensions come from your drawings, a site survey, or the supplier’s assumption.
If none of this is stated, the proposal has not committed to fit. That gap gets paid for on site.
Read the Material and Finish Description Carefully
"Oak finish" and "oak" are not the same sentence. A proposal should name the substrate, the surface material and the finish system, because those three determine cost, durability and how the shelf ages. Where a shelving piece is specified alongside other joinery — cabinetry, panelling, wardrobes — ask whether the board and veneer are matched to those items or merely colour-similar.
Also check what the proposal says about edge treatment and any visible bracket or fixing. Those details change both appearance and load behaviour, and they are usually decided before production starts rather than during installation.
Ask What the Fixing Method Depends On
The most common unresolved item in a floating shelf proposal is the wall. A fixing schedule that suits timber studs behind plasterboard will not suit masonry, and neither answer suits a tiled bathroom wall or a wall with services running through it. A sound proposal states the fixing type and the substrate it assumes; a weak one says "fixing to be confirmed on site".
For wet and humid rooms in particular, ask how the shelf is fixed and sealed at the wall line, and whether the finish is specified for that environment. Where the shelving belongs to a bathroom fit-out, the same question applies to the freestanding open shelves and the shelving accessories quoted with it, since those items share the wall and the same moisture conditions.
Compare Scope, Not Just Unit Price
Once two proposals describe the same product family at the same dimensions, the remaining differences are usually in what surrounds the shelf. Use this as a line-by-line comparison.
| Item | What a complete proposal states | Typical gap to question |
|---|---|---|
| Shop drawings | Dimensioned drawings issued for your approval before production | Approval stage missing, or production starts on the order alone |
| Samples | Board, veneer and finish samples referenced by code on the quotation | Finish described in words only |
| Fixings | Bracket or hidden fixing system, plus the assumed wall build-up | "To be confirmed on site" |
| Packaging and delivery | Packing method, number of packages, delivery address and Incoterms | Freight excluded or left as an estimate |
| Installation | Who installs, who prepares the wall, and what is handed over to whom | Both parties assume the other is doing it |
| Snagging and after-sales | How defects and replacement parts are handled after handover | No stated route for a damaged or wrong item |
For an overseas order, the logistics line matters as much as the unit price. Our Furniture Logistics and Door-to-door Delivery service covers freight forwarding, export paperwork and delivery to site; the terms still need confirming per project, including duties and import requirements for the destination country.
Test the Proposal’s Assumptions Before You Sign
A short list of direct questions settles most of the risk quickly:
- Which product family is this quoted from, and can you name it on the document?
- Are these dimensions made-to-measure for our space, and what source were they taken from?
- What wall build-up do the fixings assume, and what changes if the site differs?
- Is there a drawing approval step, and what happens to the schedule if we change something after it?
- Which items are included in the price, and which will be quoted separately later?
Suppliers who configure shelving for each project answer these without hesitation. Where the answers are vague, the missing detail will surface somewhere you no longer control — usually at handover.
If your project needs shelving configured to the space rather than selected from a fixed range — sized, finished and coordinated with the surrounding joinery, then delivered and installed as part of a wider fit-out — send us the drawings and we will quote against that scope. As a one-stop furniture and building materials supplier, we cover design coordination, custom manufacturing, logistics, installation and after-sales support in one package.