Two projects can receive cabinet proposals that look identical on a quotation sheet and behave very differently once they are on site. The difference is usually settled before production starts, by what the buyer asks for in samples and by how carefully the written proposal is read. For custom built-in kitchen cabinets supplied as interior fixtures to hotels and apartment projects, a sample and a proposal are the two documents that carry almost all of the risk. This guide explains what each one has to contain, how to put two suppliers side by side on the same page, and where buyers most often get it wrong.
What Samples And Proposals Actually Decide
Built-in kitchen cabinetry in a hotel or apartment building is not a single purchase. Doors, carcasses, worktops, hinges, drawer slides, legs and brackets all arrive together, get installed by tradespeople who did not make them, and then take daily use for years. A sample answers one question: what will physically arrive. A proposal answers a second question: what the supplier is contractually agreeing to deliver, at what price, with what exclusions.
For multi-unit work, both documents also set your ceiling on variation. Once a door finish or a hinge type is approved on a sample, every subsequent unit is judged against it. If the proposal never named that item in writing, you have no reference point when units deviate.
Read The Proposal Before You Ask For Anything
Sample requests cost time and freight. A careful read of the proposal usually shows which gaps matter enough to pay for.
| Proposal item | What a usable entry looks like | Where buyers get caught out |
|---|---|---|
| Scope and unit list | Cabinets listed per room or per unit type, with quantities that match your drawings | A single line such as "kitchen cabinets, 1 set" hides tall units, corner units and pantry runs |
| Panel substrate | Named board type and thickness for carcass and for door separately | "Moisture-proof board" with no grade or thickness stated |
| Surface finish | Finish system named (lacquer, laminate, acrylic, veneer) plus the colour or decor code | Colour described by adjective only; two suppliers read "matte grey" differently |
| Hardware | Hinges, slides, legs and brackets listed with brand or model reference, soft-close stated explicitly | "Hardware included" as one line item, with no quantity per unit |
| Worktop and integration | Worktop material and edge detail; appliance cut-outs and ventilation stated as included or excluded | Cut-outs for ovens, hobs and sinks assumed by the buyer, priced separately later |
| Made-to-measure basis | Sizes tied to a named drawing revision and date | Dimensions quoted from an early layout that site conditions later change |
| Lead time and shipping | Production time plus transport mode, and who handles customs paperwork | A production figure read as a door-to-door arrival date |
| Exclusions | An explicit list of what is not supplied | No exclusions section at all, which usually means the cheapest compliant build |
If a proposal cannot be read without follow-up questions, it is not comparable yet. Ask for the missing lines in writing before moving to samples.
Request Samples That Match The Specified Build
A sample only has value when it is made from the same materials, finish system and edge treatment named in the proposal. A door offcut from an unrelated project tells you about the supplier's general workmanship and nothing about your order.
- Door sample with the real edge. Ask for a full door or at least a corner piece, not a flat chip of board. Edge banding, profile breaks and panel routing are where finish quality shows up first.
- Carcass cross-section. One small assembled box shows board thickness, how the panels join, and whether adjustment is possible on site.
- Hardware set, fitted. Ask for the actual hinge and slide mounted on the sample rather than loose parts in a bag. Cycle them by hand and check the soft-close action.
- Finish swatch under site conditions. View it where the kitchen will be lit. High-gloss and metallic surfaces shift noticeably between showroom lighting and daylight.
- A cut-out or edge for worktop material, if the worktop is in the same order, so you can see the substrate behind the surface layer.
Ask each supplier to label every sample with the proposal reference, the finish code and the date. Unlabelled samples from three suppliers become impossible to tell apart within a week, and comparison then collapses into opinion.
Score Both Documents On The Same Sheet
Set up one comparison sheet per unit type, with the same rows for every bidder. Fill it in from the documents themselves, not from what a salesperson told you on a call.
| Comparison row | Supplier A | Supplier B |
|---|---|---|
| Carcass board type / thickness stated | ||
| Door finish system and colour code stated | ||
| Hardware brand or model named, soft-close confirmed | ||
| Sample received matches the written spec | ||
| Edge and joinery quality on sample acceptable | ||
| Appliance cut-outs and ventilation included | ||
| Drawing revision referenced for sizes | ||
| Production time and transport mode stated separately | ||
| Exclusions listed explicitly | ||
| Change-order pricing basis stated |
Two practical rules make the sheet useful. First, price per unit type rather than as one total, so a bidder who removed a tall unit cannot look cheaper than they are. Second, mark every blank cell. A blank means the supplier has not committed to anything, and it is the row that will cost you later.
What Hotel And Apartment Projects Need Differently
A hotel guest kitchenette and a residential apartment kitchen share cabinetry, but the procurement questions differ.
Hotel and serviced-apartment units
- Repetition across many identical or near-identical units. Sample approval should be recorded per unit type, with a signed reference kept for inspection of later deliveries.
- Wear resistance and cleanability matter more than decorative detail on high-turnover doors and worktops; ask which finish systems the supplier actually produces for contract use.
- Hardware is replaced over the life of the property. Standardising hinge and slide models across the whole building keeps spares manageable.
Residential apartment projects
- Showroom unit versus delivered unit is the common dispute. The approved sample governs; make sure the proposal says so and that the sample is retained.
- Budget pressure tends to land on hardware first. If a lower-cost bidder swaps slides or drops soft-close, price the swap back in before comparing totals.
- Kitchen layouts often vary by apartment type. Confirm each variant has its own drawing reference and price line.
Where cabinetry is one package inside a wider fit-out, it helps to work with a one-stop furniture and building materials supplier, so cabinets, wardrobes, vanities, doors, wall panels and flooring are specified against the same finish schedule and arrive on one coordination plan. As a hotel furniture and fit-out supplier, SANTERSON supplies custom built-in kitchen cabinets as interior fixtures for hotel, apartment and residential renovation projects, with cabinet layout, sizes, door styles and surface finishes made to order, and matching hardware such as hinges, drawer slide rails, support legs and connecting brackets available on request.
Five Ways Buyers Misread Samples And Proposals
- Judging a door by its face alone. Turn it over. Board quality, edge banding and back-side finish are visible there and are usually the first thing to fail in humid use.
- Treating the lowest total as the lowest cost. Compare per unit type, then add what each bidder excluded. Missing cut-outs, panels and hardware frequently close a wide gap.
- Accepting a sample that is nicer than the proposal. If the sample carries a finish code the proposal never mentions, the sample is not your deliverable. Get the code into the document or reject the sample.
- Skipping change-order terms. Site dimensions move. A proposal that states how a size change is priced saves an argument mid-production.
- Reading production time as arrival date. Ask for production time and transport separately, and confirm who prepares commercial invoices, packing lists and customs documentation.
Approval Checklist Before You Release Production
- Every sample is labelled with proposal reference, finish code and date, and one set is retained as the approved physical reference.
- Board type and thickness for carcass and door appear in the signed document, not only on a data sheet.
- Hardware list names each item with quantity per unit type, and soft-close status is stated.
- Worktop material, edge detail and appliance cut-outs are either included or priced as named extras.
- Sizes reference a drawing revision number and date; superseded drawings are marked withdrawn.
- Production time, transport mode, delivery terms and documentation responsibilities are written out.
- Exclusions and the change-order pricing basis are in the contract package.
- The same comparison sheet has been completed for every bidder, with no blank cells left unexplained.
Send the drawings you are working from and state your unit counts and required dates; a supplier can then return a proposal detailed enough to compare rather than a headline price. That single step usually determines whether the sample stage confirms a decision or starts a new round of questions.
Talk through your cabinet package before ordering samples. SANTERSON is a China-based furniture and building materials manufacturer supplying custom built-in kitchen cabinets and other interior fixtures for hotel, apartment and villa projects, with custom & OEM service, logistics and door-to-door delivery, and installation and after-sales support.
Phone / WhatsApp: +86-13928214007 (PHILLIP) | Email: santerson@qq.com | Contact us