A veneer door sample from two different suppliers can look identical on your desk and behave very differently on site months later. When you are comparing samples and proposals for Santerson Wood Veneer Hinged Doors, the sample tells you what the leaf looks like, while the proposal tells you what will actually arrive, who pays for the freight, and what happens when something is wrong. Read the two together, and write down what each supplier puts in writing.
The doors in this range are made to measure for residential projects, with finish, layout and dimensions specified per project. That configurability is the reason a straight price-per-leaf comparison fails: two quotations that both say "wood veneer hinged door" may cover different constructions, different hardware, and different delivery terms.
Start With What the Sample Is Supposed to Prove
Request the sample before you compare numbers, not after. A sample is only useful if you decide in advance what it has to answer. For a hinged door package on a villa or apartment project, four questions matter:
- Grain and colour match. Lay the sample against the flooring, wall panelling and joinery you have already selected. Veneer is a natural material, so ask how much variation between leaves is acceptable on your job and confirm it in writing.
- Edge and surface finish. Look at the joint where the veneer wraps the edge, and check the sheen level under both daylight and warm artificial light. This is where cheap work shows first.
- Hardware feel. Open and close the sample with the hinges and lock set that will be quoted. Weight, closing sound and handle action are things a specification sheet cannot tell you.
- Scale. A small swatch hides problems that only appear on a full-height leaf, especially grain alignment across a pair of doors.
Keep the approved sample, sign and date it, and reference that same signed sample in the purchase order. If the proposal later describes something different, the sample is your evidence.
Read the Proposal Line by Line
Once the sample passes, move to the paperwork. The differences between two proposals are usually hiding in these six lines:
- What size is being priced. Made-to-measure openings mean the quotation must show opening size, leaf size and frame size separately. A low price often means a smaller leaf or a slimmer frame than your drawings assume.
- What is included with the door. Frame, architrave, hinges, lock body, handle, door closer and glazing beads are not automatically part of every line item. Compare like for like.
- Finish scope. Check whether the veneer species, cut pattern and topcoat are named, and whether both faces of the leaf are finished to the same standard.
- Quantities and openings schedule. A door schedule that lists each opening by number lets you compare rooms across suppliers. Without it, you cannot tell whether two quotations even cover the same building.
- Delivery terms. Ask what the price includes up to: factory gate, port, or the project address. Freight, customs paperwork and container loading change the real landed cost more than most people expect.
- What happens on a problem. Warranty scope, spare parts availability and who covers replacement on site should be stated, not assumed.
Build One Comparison Sheet for Every Bidder
Put every quotation into the same table before you decide anything. Use one row per opening from your door schedule and one column set per bidder: sample approved yes or no, leaf construction, veneer species and finish as named in writing, frame and architrave included yes or no, hardware set listed by name, quantity, unit price, inclusions up to site, packaging method, and stated remedy for damage or mismatch.
Two things usually become obvious once the sheet is complete. First, the cheapest headline price is often the one that excludes hardware, architrave or delivery to site. Second, suppliers who answer in specifics are cheaper to work with than suppliers who answer "standard" — and you can hold specifics to account.
If a bidder will not commit a finish or a hardware set in writing, treat that as a cost, because the variation will appear later. For matching wall finishes elsewhere in the same project, Wood Veneer Panels can be specified alongside the doors so grain and tone are coordinated across the package rather than matched after the fact.
Compare How Each Supplier Coordinates the Package
Doors rarely travel alone on a fit-out. Cabinetry, joinery, wall panelling, flooring and lighting usually come from several sources, and each handover is a place where dimensions get re-measured and blame gets passed around. Before you sign, ask each supplier how they handle the practical steps:
- Who produces the opening drawings, and who confirms them on site before production starts.
- Whether bespoke finishes and materials can be specified for your project rather than limited to a fixed catalogue.
- How packaging is arranged for container loading, and how the shipment is tracked after it leaves the factory.
- Who attends site for installation and snagging, and what inspection takes place before handover.
A supplier that works through design, production, logistics and installation as one package gives you fewer interfaces to manage than several separate vendors quoting the same drawings. That is why our Turnkey Solutions service runs a defined sequence — consultation, design and planning, production, logistics, installation, then after-sales — with one point of coordination across the whole order.
Check the Door Range Against Your Own Drawings
Veneer hinged doors are one option among several, and the right choice depends on how the leaf is used. Where a clean, flat face meeting the wall line is wanted, Santerson Flush Hinged Doors is specified instead. Where the door sits within a general interior package rather than as a decorative feature, Standard Interior Hinged Doors covers the everyday openings. Pocket and folding configurations solve tight circulation areas where a hinged swing would clash with furniture.
Mark each opening on your drawings with its operation type before you request quotations, then ask every bidder to price the same schedule. Comparing a veneer hinged leaf from one supplier against a flush leaf from another is not a comparison at all.
Ask for the Same Documentation From Every Bidder
The last column on your sheet should be paperwork. Ask each supplier to supply, with the priced proposal: a signed door schedule showing sizes and quantities; named material and finish references matched to the approved sample; the hardware set listed by model; packaging and container-loading details; shipping documents including commercial invoice, packing list and certificate of origin; and the warranty statement in writing with its exclusions. Suppliers who produce these without prompting are usually the ones who will also produce them cleanly at delivery.
Send your drawings and door schedule to our team and we will return a quotation with each opening priced against your own schedule, together with a sample of the specified veneer finish for approval before production.
SANTERSON is a China-based manufacturer and one-stop supplier of furniture and building materials for villa, hospitality and office projects. Send us your door schedule and we will quote Santerson Wood Veneer Hinged Doors with matched frames, hardware and finishes, coordinated with the rest of your package.
Phone / WhatsApp: +86-13928214007 (PHILLIP) | Email: santerson@qq.com