When a resort terrace, villa garden or café patio needs an outdoor dining set, the chair is usually decided first and the tabletop second. Our synthetic wicker outdoor dining sets are built that way: one lattice-woven dining chair, two table options — a round teak-look slat table and a square sintered stone table. This guide explains how to read the frame, weave, cushion and tabletop choices in that family, so you can specify the right version for your project instead of guessing from photographs.

Start with the chair, because both versions share it

Both layouts use the same dining chair: an aluminium frame wrapped in all-weather rattan, with an open lattice weave and a thick seat cushion. That single detail settles most of the durability question before you compare tops.

An aluminium frame carries the load and does not rot the way a timber frame can once its finish is scratched at poolside or on a coastal terrace. The woven skin takes the weather and the use, so what matters is that it is a synthetic wicker made for outdoor service rather than an indoor decorative weave — and that the weave stays open enough to drain and dry. The lattice pattern here does exactly that: rain runs through it, sun passes around the strands, and the cushion sits on top of a surface that can breathe in hot climates.

Cushions are the part buyers replace, so specify them as a service item from day one. Ask for the fabric colourway and the fill construction on your drawing, confirm how the cover closes and whether it can be removed for cleaning, and order spare covers with the original batch while the dye lot is still available.

Round teak-look slat table: warmth first

The round version carries a teak-effect slat top. It reads as timber — parallel boards, warm tone, casual lines — which suits garden dining, beach clubs and villa terraces where the scheme already uses wood tones, planters and soft landscaping.

Because it is a teak-look surface rather than solid teak, you do not carry the sanding and oiling routine that real teak demands outdoors. What you do need to check is how the slats are fixed and spaced: drainage gaps, edge trim, and whether the top lifts off the frame for cleaning or storage. A round table also seats people without hard corners, which is why it works well on tighter terraces and around smaller pools where guests brush past the furniture.

Choose this version when the brief asks for a relaxed, natural look and the setting is medium intensity — a villa terrace, a garden restaurant, a boutique hotel breakfast area.

Square sintered stone table: maintenance first

The square version swaps the slat top for a sintered stone top. The argument for it is daily service. A hard, sealed surface wipes clean after a full covers turn, resists staining from coffee, oil and red wine, and does not have gaps between boards to trap crumbs.

That is why we usually specify it for high-use commercial resort environments: poolside food and beverage, all-day dining terraces, event lawns with turnover between sittings. Square tops also sit neatly against walls and building edges, and they align cleanly in rows when you need repeatable layouts for a set number of covers.

Two practical checks before you commit: the corner treatment (radiused edges are kinder to high-traffic areas than sharp arrises) and how the slab is supported on the frame, since stone tops are heavier than slats and need to be lifted safely when the area is cleared.

A side-by-side comparison you can put in a specification

Decision point Round teak-look slat table Square sintered stone table
What it looks like Warm timber effect, casual and natural Crisp stone surface, cleaner and more formal
Daily cleaning Rinse and brush; check the gaps between slats Wipe over; no joints to trap debris
Best setting Villa terrace, garden dining, boutique hotel Resort food and beverage, poolside, high covers turnover
Layout behaviour Soft flow, no corners, good for tight or curved paths Aligns in rows, sits flush to walls and edges
Handling Lighter top, easy to move when clearing the area Heavier top; plan who lifts it and how often

Finishes you can change, and details you should lock down

For hospitality orders we support custom wicker shades, cushion colours and table dimensions. That flexibility is what lets one chair design serve both a beach club and a fine-dining terrace: a darker weave with a deep cushion reads as lounge dining, a pale weave with a brighter cushion reads as poolside.

Treat the following as items to fix on your approval drawing rather than options you discover later:

  • Wicker colour and profile, matched against a physical sample board kept on site for future replacements.
  • Cushion fabric — outdoor-rated, colour-fast, and specified with a removal method for cleaning.
  • Table diameter or side length, checked against your seat count and circulation clearances.
  • Top finish and edge detail, confirmed with a first article before the batch runs.
  • Frame joint and fixing hardware, since that is where repeated moving shows up first.

Ordering both versions in one project

Mixing them is a sensible way to control cost without flattening the design. Keep the sintered stone square tables where service staff work — restaurant terraces, pool bars, banquet lawns — and place the round teak-look tables in guest-facing, lower-intensity corners such as villa patios and lounge gardens. Because the chair is identical, the two layouts still read as one collection.

If you are furnishing more than one outdoor zone, it is worth coordinating these sets with the rest of the exterior package at quotation stage — loungers, daybeds, umbrellas and shade structures all arrive better when they are specified together. Our outdoor furniture collections sit inside the same programme as our wider turnkey project service, which covers design coordination, custom and OEM manufacturing, production, door-to-door delivery and installation support.

Before you send an enquiry

Send us the floor or terrace layout with your target seat count, a photograph of the setting, and which of the two tabletops you are leaning towards. From that we can confirm table dimensions, wicker and cushion colourways, and packaging for delivery to site — then quote both configurations so the comparison is based on your actual project rather than a catalogue page.

Questions about this woven dining family, or an outdoor package you are pricing right now? Contact SANTERSON and we will help you settle the materials and finishes before production starts.