A hinged door corner wardrobe rarely arrives at a project site as one piece. It reaches the building as a set of panels, doors and hardware, and how those parts are packed decides whether the installation crew starts work calmly or spends the first afternoon repairing damage. For buyers arranging hinged door corner wardrobes for a villa or apartment fit-out, packaging is not a logistics footnote. It is part of the product specification, and it should be confirmed in writing before production starts.

Why this wardrobe type is more exposed in transit

Corner wardrobes are built around two carcass runs that meet at an angle, so the parts are long, uneven in size and easy to twist. Hinged doors add weight to every flat panel, and the hinge fixings carry the alignment of the whole front elevation. A knock on a door edge is visible for the life of the room, and a warped side panel cannot be planed back on site.

Because these wardrobes are made to measure — sizing, material, finish and layout are specified per project — a replacement part is not something a site team can buy locally. Re-manufacturing one panel means restarting production, re-finishing it to match the batch already delivered, and paying for another shipment. Confirming the pack detail up front is far cheaper than solving a breakage after the container has cleared customs.

Confirm the packing method, part by part

Ask the supplier how each element of the order is protected, rather than accepting a general statement such as "export standard". A practical list to agree on covers:

  • Panels and carcass parts. Flat components separated by protective interlayers, edge protection on exposed long edges, and corner guards where panels stack against each other.
  • Doors. Hinged doors packed so the hinge side is not bearing weight, with the finished face shielded and the panel supported across its full width instead of resting on one edge.
  • Glass or mirrored door fronts, where specified. Glazed elements travel separately from timber panels, in framed crates, and this should be visible on the packing list.
  • Hardware and hinges. Boxed separately with gaskets between fixing plates, so metal cannot abrade a finished surface during handling.
  • Marking. Every carton or crate numbered against the drawing set, so the site team can identify which panel belongs to which wardrobe run without opening everything.

Numbered marking sounds minor and is usually the single detail that saves the most time on site. A corner wardrobe has parts that look nearly identical until they are offered up to the wall.

Agree how the order ships and what documents travel with it

For larger consignments, wardrobes normally travel in shared containers alongside other joinery and finishes. That is efficient, but it means your crates sit under someone else's cargo unless the loading plan says otherwise. Confirm which pallets or crates hold doors and finished faces, and request that they are loaded last and unloaded first.

The paperwork matters as much as the timber. Ask for a packing list that shows carton counts, dimensions and weights per item, plus the commercial invoice and any certificate of origin your customs broker will require. Logistics and door-to-door delivery support is most useful when the buyer receives this documentation before arrival and can pass it straight to the clearing agent.

Also settle where responsibility for damage ends. State in the order who inspects at the port, what photographic evidence is expected, and how quickly a claim must be raised. Buyers who leave this vague tend to discover it only when a damaged door front needs replacing.

Match the pack detail to the site conditions

Tell the supplier where the goods are going. A ground-floor apartment with a service lift and a wide corridor tolerates long crates. An upper-level villa in Sydney or Melbourne reached by a narrow stair may not, and bulky crates then get forced through doorways, which is where most on-site damage actually happens. Where access is tight, ask for the wardrobe to be broken into smaller sub-assemblies that still square up correctly when assembled.

Storage on site is the second constraint. Panel packs need a dry, level place until installation. If the building is still wet-trade work, plan delivery closer to the joinery stage instead of taking early delivery, and say so in the shipping instructions.

Where custom manufacturing changes the conversation

Standard wardrobe components can be repacked from stock. Made-to-measure work cannot, which is why custom and OEM service orders should carry a packaging specification alongside the shop drawings. At SANTERSON, project orders for built-in furniture such as corner wardrobes are specified to the project's dimensions, materials and finishes, with turnkey delivery for villa and hospitality projects covering production through to site handover. That sequence gives the buyer one point of contact for both the joinery and the way it arrives.

Ask for a pre-shipment pack check: photographs of the packed crates, the crate numbers read against the drawing set, and confirmation that door fronts are protected separately. This is a small step that removes most arguments later.

A short pre-production checklist

  • Packing method confirmed for panels, doors, glazed fronts and hardware individually.
  • Carton and crate numbers cross-referenced to the approved shop drawings.
  • Loading sequence agreed for shared containers, with finished-face crates protected.
  • Packing list, invoice and customs documents confirmed in advance of arrival.
  • Damage inspection point, evidence requirements and claim window written into the order.
  • Delivery timing aligned with the joinery stage and with on-site storage conditions.
  • Access route checked, with sub-assembly specified if crates will not fit.

Work through that list before production is released and the packaging becomes part of the contract rather than an assumption. If you want the pack detail reviewed against your own drawings for a wardrobe or wider joinery package, send the drawings to SANTERSON and the team will confirm sizing, finish options and how the order would be packed and delivered.