1. The room conditions, not just the look you want

A flooring enquiry rarely fails over price. It stalls because the supplier is left guessing: which room, which board format, which finish, how many square metres, and when the material has to arrive. If you are specifying Light European Oak Engineered Wood Flooring for a villa, apartment or hospitality fit-out, the five items below are what let a manufacturer such as SANTERSON quote accurately and keep the schedule intact.

Send the floor plan or a marked-up layout with the enquiry. Flooring decisions change room by room: a living area that runs into an entrance will see grit and moisture tracked in, while a bedroom sees far less traffic. Note what sits under the slab, whether the subfloor is concrete or timber, and whether underfloor heating is present or planned. Also record how much direct sunlight the glazing lets in, because light-toned oak reads very differently under strong sun than it does in a north-facing study.

Then state the use level honestly. A private residence, a rental villa, a hotel corridor and a serviced-apartment lobby all wear differently, and that single sentence changes the finish and board format we would recommend.

2. Board format, top-layer construction and surface treatment

The reference product on our site is described as a light European oak engineered board with a 3 mm solid oak wear layer and a multilayer structure intended to reduce deformation, with natural knots and subtle grain retained for a soft rustic character. Treat those published figures as the starting point rather than the final specification: board width and length, plank or herringbone layout, top-layer thickness, bevelled or square edges and the chosen surface treatment all need confirming against current production sheets before order.

Decide in advance what you want kept and what you want graded out. Knots, mineral streaks and open grain are part of the appeal for many architects; a tighter, more uniform face suits long runs of guest-room flooring where visual consistency matters. Saying which side of that line you sit on removes one full round of samples.

If your scheme calls for a different tone or layout, our Flooring range also covers darker European oak, parquet and herringbone boards, so it is worth naming the alternative you are weighing.

3. Quantities, wastage allowance and the delivery sequence

Give measured areas per room plus your wastage allowance, and say who calculated them. Then give the installation date and work backwards: production time, freight, customs clearance and on-site storage. Flooring that lands before the wet trades finish is a damage claim waiting to happen, so tell us whether you need one complete delivery or staged drops by floor or by unit.

Batch colour matters more than buyers expect. Oak boards from different production runs can vary in tone, so if your project will be installed in phases, say so at enquiry stage and we will plan the volume accordingly rather than leaving you matching batches on site.

4. Installation method and the accessories that come with it

State how the floor will be fixed: direct glue-down to screed, floating over an underlay, or a raised system. Each has different subfloor preparation requirements and different adhesive costs. Add the trims you need — thresholds at doorways, scotia or skirting interfaces, expansion coverage at perimeter runs, and stair nosings if the boards continue up the stairs.

Flooring rarely travels alone. Because SANTERSON is a one-stop furniture and building materials supplier, enquiries often bundle flooring with cabinetry, wall panelling and lighting for the same building. If that is your case, send the full bill of quantities in one pack so we can align production windows and consolidate freight instead of shipping three separate consignments.

5. Your decision route and site constraints

Tell us who signs off the finish: architect, interior designer, builder or owner. Sample routing then follows the right person, and approvals do not sit in a tray for six weeks. Also flag access limits — lift dimensions, service entrance hours, allowable delivery times, storage space on site — because these decide crate sizes and container type far more cheaply at quotation stage than at delivery.

What to expect from us in reply

Send the room conditions, format preference, quantities with dates, fixing method and decision route, and you should receive a specification sheet for confirmation, sample options, a quotation with the accessories itemised separately, and a production plus freight plan. Our Custom & OEM Service covers bespoke finishes and configurations where an off-catalogue board is required, and our Logistics & Door-to-Door Delivery service covers freight, customs paperwork and delivery arrangements.

A short technical call before samples are posted is usually the fastest route. If you have drawings ready, attach them — a single annotated section detail answers most of the questions we would otherwise ask by email.