Open bookshelves are easy to specify badly. The shelf looks solid on the drawing, the finish matches the joinery, and then the span sags under a row of hardbacks, the depth swallows paperbacks in a tangle, or the unit fights the skirting line it was meant to flatter. A checklist prevents that by forcing the same eight decisions onto paper before anyone cuts a board. Here is the list we work through when a client asks for open bookshelves as part of a fitted interior.
1. The wall, measured in three places
Begin with the opening: width and height at the top, middle and bottom of the wall, not one tape measure at eye level. Villa and apartment walls are rarely square and plumb, and a made-to-measure unit only works if the measurement reflects what is actually there. Record skirting heights, architraves, light switches, radiators, ceiling cornices and any downlight that falls inside the footprint. If the design runs to the ceiling, confirm the finished floor level, because a floor laid after the survey shifts everything above it.
Decide early whether the unit is freestanding, wall-mounted or built into a recess. Our wall-mounted shelves and floor-to-ceiling bookshelves are different configurations with different fixing details, and the wall behind them matters: stud partition, masonry or a framed cavity each needs its own bracket and anchor approach. That is a question for your builder or installer, and it belongs on the checklist before the drawing is signed off.
2. What you are actually storing
Shelf depth follows contents. Reference hardbacks and art books need more depth than a paperback run; display objects need headroom rather than depth; records sit awkwardly on a shelf sized for magazines. Write down the tallest and deepest item in the collection, then set bay height and depth around it with a little air above so the shelves do not read as packed.
Then be realistic about dust. Everything on an open shelf is cleaned by hand, which is why most project clients mix open bays with closed ones rather than giving a whole wall to display. Pairing open shelving with closed bookshelves, or with one run of glass-front bookshelves for the items worth showing, keeps the cleaning rota short and stops the wall looking cluttered once real life arrives.
3. Span, load and shelf thickness are one decision
This is where a checklist earns its keep. A wide bay carrying a full row of books behaves differently from the same width holding a vase and two framed photographs. Fix the intended use for each bay on the drawing, then let that drive shelf thickness, divider spacing, and whether a bay needs intermediate support. Ask the supplier to state the span they have designed for rather than assuming a standard width is safe for books.
Long, uninterrupted runs belong to a different product family. Metal frame modular systems and floor-to-ceiling shelving systems carry load through a vertical frame instead of relying on the carcass alone, which is why they suit tall library walls and room-dividing screens. Our modular bookshelf systems work the same way: you set the bay grid to fit the wall instead of forcing the wall to fit a catalogue size.
4. Materials and finish matched to the room
Bookcases rarely stand alone; they sit beside wardrobes, media units and kitchen joinery, so the board and surface should match the rest of the fit-out. Shelving is built in the same finishes used across our cabinetry ranges, including matte melamine for a practical wipe-clean surface and natural wood veneer where the brief calls for real timber figure. Specify the edge treatment as well as the face: on open shelving every edge is visible from both sides, and mismatched edging is the detail that gives away a cheap unit at a distance.
In rooms with humidity to consider, such as bathrooms and utility areas, ask which substrate the supplier proposes rather than accepting the board specified for the bedroom. Shelf heights, finishes and door details can be coordinated across our custom built-in wardrobes and storage walls, keeping a multi-floor specification consistent without chasing several manufacturers.
5. Lighting decided before the shelves are built
Lit shelving looks simple and fails often when lighting is treated as an afterthought. Recessed shelf lights need a channel, a driver with somewhere to live, and a cable route planned while the carcass is being designed. Retrofitting surface fittings means visible trunking or shallow lights that throw hot spots across the shelf face.
Put three items on the list: where the fitting sits, how the driver is reached for service, and which switch or control it connects to. Integrated cabinet lighting is specified inside the joinery package on our projects for exactly this reason, so the wiring sits within the panel rather than being added later. Confirm the electrical specification and its compatibility with the chosen cabinet design for each project; a detail that works on a bedroom wardrobe may not suit a tall library wall.
6. Safety, fixing and the small print
Tall open units need anchoring, and in a family home or a hotel guest room that is not optional. Note on the checklist which wall the unit fixes to, what anchors that build-up requires, and whether fixings come with the unit or from the local contractor. Glass-front bays need a stated glass type and hardware specification for the configuration chosen. Where children or public use are involved, raise it at drawing stage so edge profiles and fixing details can be adjusted before production.
7. Who measures, who ships, who installs
For an imported fit-out this section prevents most later arguments. Confirm who takes the site measurement, who issues the shop drawing for approval, how the unit is packed and which container it shares with other joinery, and who fixes it on site. Our project workflow runs from design consultation and space planning through production, freight and door-to-door delivery to installation support, so a shelving wall can be ordered as part of a wider package rather than as a loose item that arrives with nobody responsible for fitting it.
One practical note: sign off the shop drawing before production starts. It is the one document where bay grid, shelf heights, depths, finishes, lighting and fixings appear together, and correcting a dimension there costs nothing next to correcting it on site.
8. A budget written as a specification
A quote you can compare has to describe the same thing twice. Ask for board and finish, carcass and shelf thickness, bay widths, made-to-measure allowances, hardware, lighting and fixings itemised separately. Two quotes for "one wall of shelves" diverge quickly once those lines are listed, and that is usually where a low price turns out to be low because it omits the frame, the lights or the anchors.
Shelving also sits naturally inside a larger package. Our mid-century whole-house custom cabinetry project placed white open bookshelves beside the staircase, alongside a bay-window desk with drawers and wood-grain kitchen cabinets, all drawn to the same details so the shelving reads as part of the design rather than an added purchase.
The checklist in short
- Wall: three-point height and width, skirting and services noted, finished floor level confirmed.
- Contents: tallest and deepest item measured; open bays balanced with closed storage for dust.
- Structure: span, load and shelf thickness fixed together per bay; framed systems for long or tall runs.
- Finish: board, surface and edging matched to surrounding joinery.
- Lighting: fitting position, driver access and control specified with the carcass.
- Safety: wall build-up, anchors and glass specification recorded.
- Delivery: measurement, shop drawing, packing, freight and installation each assigned to a named party.
- Quote: itemised so like-for-like comparison is possible.
Work through those eight points and the enquiry you send will be specific enough to price properly. Send us the wall dimensions, what the shelves must hold and the joinery they have to match, and we will return a made-to-measure shelving scheme with a quotation for the wider fit-out rather than a single line item.