Textured lacquer cabinet doors look decisive on a rendering and quietly difficult on site. The finish carries every millimetre of misalignment, every shadow gap that was never dimensioned, and every wall that was finished after the cabinets went in. If the drawings stop at an elevation with a colour name on it, the coordination work simply moves to installation day — where it is expensive to fix. Below is the sequence we apply on residential kitchen projects so that Textured Lacquer Cabinets arrive as a complete, buildable package rather than a set of doors that have to be adjusted in place.

Start with the drawing set you actually need

A concept elevation answers one question: what does the run look like. Production on made-to-measure lacquer needs a second layer of information, and it is worth agreeing who produces which sheet before any measurement is taken. On our side we work from:

  • Room dimensions with finished floor level, finished wall faces, and the thickness of every plasterboard or tile build-up — not the structural shell.
  • Appliance schedule with model numbers and installation drawings: oven, hob, extractor, dishwasher, refrigerator, wine cooler. Built-in appliance heights drive tall-unit and housing dimensions.
  • Worktop and splashback decision, because the worktop thickness sets the height of the base-unit carcass, plinth and any upstand detail.
  • Services positions: water, waste, gas, power sockets, and extractor routing, dimensioned from fixed reference lines rather than “as built on site”.
  • Door schedule for the lacquer run: door style, grain or texture direction, finish sample reference, and the handle or integrated pull detail.

Where a project does not yet have this level of documentation, our design team can prepare space planning, 3D visualisation and production drawings from the site survey. That step sits inside our Interior Design Services, which is where most coordination problems are cheaper to resolve.

Translate the finish sample into drawing notes

“Textured lacquer” covers a range of surface depths, and two samples that look alike under studio light behave very differently under kitchen downlights. A few points belong on the drawings rather than in an email thread:

  • Texture direction. Specify whether the texture runs vertically or horizontally across each door, and mark it on the elevation. Mixed direction across a run reads as an error under raking light.
  • Sample reference and batch. Quote the approved sample code on the order sheet, and keep one physical signed-off sample for goods-in inspection. Lacquer applied across production batches can shift subtly in sheen and colour depth.
  • Sheen under site lighting. Confirm the finish against a sample at the same colour temperature as the installed lighting before sign-off, not only on the rendering.
  • Edge and profile detail. Textured surfaces show through on chamfers, rebates and integrated pulls. If a 5 mm reveal or a shadow-gap profile is intended, draw it.

If the same room needs contrast rather than one uniform surface, the neighbouring options in the collection are straightforward to combine: Matte Lacquer Cabinets for large runs that need a low-reflective backdrop, and High Gloss Lacquer Cabinets where a light-coloured kitchen has to bounce light across an open-plan space. Keeping the substrate, carcass system and construction consistent across those finishes matters more than matching the colour exactly.

Verify site conditions before production starts

Made-to-measure sizing only pays off if the measurement reflects the room at installation. The checklist we ask project teams to close out before the order is released:

  • Walls plastered, squared and at finished thickness; corners checked for squareness across the whole run.
  • Floor finish laid and level, with the final floor level marked on the walls so base units and tall units are set to it.
  • First-fix services completed and pressure-tested, with positions confirmed against the drawings rather than adjusted silently.
  • Windows, architraves, skirting and radiators fixed, since each one takes millimetres from a cabinet run.
  • Access route to the property measured — lift dimensions, stair turns, door widths — so full-height doors and side panels can actually reach the room.

For villa and apartment work delivered internationally, delivery planning also belongs with the drawing set. Our logistics and door-to-door delivery service covers freight forwarding, packaging and container loading, customs documentation and shipment tracking, so the cabinetry reaches the site in a sequence that matches the building programme instead of arriving before the plaster is dry. Import terms, duties and transit arrangements are agreed per project.

Control the interface details on site

Most “finish problems” reported after installation are really interface problems. Three deserve attention on the drawings:

Carcass-to-wall. Scribe or filler panels should be dimensioned on the drawing, not cut from offcuts on site. On a textured lacquer front, an uneven reveal next to a rough plaster face is visible from across the room.

Worktop-to-door. Confirm the worktop material and thickness early, then set the door overlay consistently across base and tall units. Where a stone splashback returns into the run, mark the rebate or the shadow gap on the elevation.

Appliance housings. Built-in ovens, column refrigerators and dishwashers each have manufacturer clearance requirements for ventilation. Those clearances belong in the tall-unit dimensions before the panel is lacquered — a housing that is 10 mm short cannot be corrected by adjusting a door.

Once the run is installed, we work with the site team through alignment, door adjustment and snag inspection. Warranty terms, spare parts and maintenance support are handled through the installation and after-sales service described on our site. Where a project has a phased handover, ask for replacement panels and doors against the original order reference so a later part matches the surface already in use.

A short coordination checklist

StageWhat must be signed off
DesignLayout, appliance schedule, worktop and splashback, door schedule with texture direction
SamplePhysical finish sample approved under site lighting conditions, code recorded on the order
SurveyFinished wall and floor levels, squareness, services positions, access route
ProductionMade-to-measure dimensions, carcass system, interface details drawn, batch reference logged
DeliveryPackaging and container loading plan, documentation, arrival date matched to the site programme
InstallationScribe panels set, overlays consistent, appliance clearances verified, snag list closed

Textured lacquer rewards projects that decide early. Send the drawings you already have — even a concept elevation plus an appliance list — and we will return made-to-measure dimensions, finish references and a production drawing set for your review before anything goes into manufacture.

SANTERSON — furniture and building materials manufacturer, custom & OEM cabinetry. Enquiries: PHILLIP · +86-13928214007 (WhatsApp) · santerson@qq.com