Ask most buyers what they send when they first contact a manufacturer about an outdoor swim spa WS-S10, and the answer is one sentence: "what does it cost?" Ask the manufacturers on the other end of that email, and they will tell you the same thing — a price quoted without site conditions is not comparable to anything. A quotation you can actually place side by side with two competitors' quotations needs a defined shell size, a defined equipment package, a defined installation method and a defined delivery point. Here is what to have ready before you write, and why each item changes the number you get back.

Know Which Shell You Are Asking About — Suffix Matters

In this catalogue family the model designation is not decoration. Within the same length, a base model and its "-T" variant share the shell but differ in what is fitted inside it. The catalog lists both WS-S10 and WS-S10-T at 10000 × 2200 × 1420 mm, with a control system, water pumps, filter pump, jet package, LED lighting and ozone. The difference the site records is the swim training system: listed for the -T variant, not listed for the base model.

That single line decides whether you are buying a hydrotherapy and entertaining spa or a spa you can actually swim against. So the first thing to prepare is not your budget — it is an honest answer to "what will I do in this water most weeks of the year?"

Primary useWhat to ask for on the specification sheet
Swim training, several times a weekThe swim current unit and how it is adjusted; usable swim length inside the shell rather than external shell length; whether the current is available across the full width of the lane.
Hydrotherapy, rehab, low-impact exerciseJet count and jet layout by zone, seating positions, temperature control, handholds and step arrangement for getting in and out with warm water.
Family use and entertainingDepth profile, safe access, lighting, cover type, and the weekly maintenance routine in time rather than in marketing words.

Catalogue specifications are transcribed from product pages and get revised. Confirm the exact designation and its current equipment list with the supplier for your order — do not assume a number you read somewhere still describes what will be built for you.

Site Facts That Decide Whether Any Model Fits At All

A swim spa arrives as a shell, not as flat-pack. Before finishes or options are discussed, the supplier needs to know whether it can physically reach its final position and whether what is underneath it will carry it full of water.

  • Installation method: above ground on a deck, semi-recessed, or fully in-ground. Each needs a different build around the shell and a different price.
  • A plan or sketch with overall length and width of the available area, plus clear height at the widest point along the route.
  • The delivery route: gate widths, steps, turning space, overhead lines, driveway surface. A shell that fits the site but not the access route becomes a crane lift, priced separately in most cities.
  • Slab or pad: existing or to be poured, ground-bearing or suspended. Filled weight is what your engineer cares about, so ask for empty and filled weights in writing.
  • Local rules already identified: barrier, fencing or structural approvals from your council or body corporate. Ask your authority what applies before you commit to a configuration.

Send photographs of the site from two or three angles with your first message, and copy in your builder or electrician if one is engaged. A manufacturer's project team can usually tell from photos whether the model you have in mind works there — which saves everyone a wasted quotation round.

Power, Water and Service Access — The Three Items That Delay Installations

These sit outside the spa itself, which is exactly why they get left until the shell has already shipped.

  • Electrical supply at the site: single-phase or three-phase, what your board can carry, and the distance of the run from the meter. Photograph the distribution board and note that distance.
  • Fill, drain and overflow: where the water comes from, where it goes during servicing, and whether an external tap and drain already exist.
  • Plant access: pumps, filters and heaters need a reachable panel. Sealing a shell in on all four sides with no access point creates a maintenance problem you pay for repeatedly.
  • Cover storage and headroom: insulated covers need somewhere to sit, and covers on rails need clearance above the water.

Catalogue-listed options in this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so treat each option as a question rather than an assumption: ask whether it is included, optional at a stated price, or not offered for that shell.

Ask For A Configuration Sheet, Not A Price Line

Two spas of similar length can differ substantially in usable swim zone, jet layout, insulation build and equipment package. Comparing two suppliers fairly means comparing their configuration sheets, so ask for one that states:

  • External dimensions and internal water dimensions — so you compare usable length, not shell length.
  • Water capacity, empty weight and filled weight, for your slab or deck engineer.
  • Pump and blower arrangement, jet count and zone layout, and what is included versus optional.
  • Heater type and control, insulation construction, and total connected power — then ask what those mean for running cost in your climate.
  • Filtration route, filter access point and recommended service interval.
  • Water treatment offered, such as ozone or UV sterilisation, and what each costs to run.
  • Cabinet and finish choices, and whether they come from a fixed range or can be matched to something you specify.
  • Every option that moves the price: swim current unit, seating layout, lighting, water features, control system, cover type, steps.

A supplier who sends that sheet has nothing to hide in the quotation. A supplier who sends only a number is asking you to compare on price alone.

Buying Direct From An Overseas Manufacturer: Add These To The Enquiry

Sourcing direct from the factory usually improves price and widens what you can specify, but it moves some responsibility onto you. Confirm these in writing before payment.

  • Packaging and container plan. How the shell is packed, which container it goes into, and what else shares that container. Buyers often fill the remaining cube with outdoor furniture for villas and resorts — loungers, dining and sofa sets, pergolas — from the same supplier, on the same delivery.
  • Incoterms. Factory price, port price and delivered price are three different numbers; make sure both sides mean the same one.
  • Freight mode and documents. Sea, air and rail are all available on most shipments, with commercial invoice, packing list and origin paperwork. Confirm who clears customs at your end.
  • Who sites, connects and commissions the spa locally. The manufacturer guides and supports; the physical installation is normally done by your local trades.
  • Spare parts and service route. Which wear items to order with the spa, how fast replacements ship, and who services equipment under warranty in your country.

SANTERSON is a China-based furniture and building materials manufacturer operating since 2008, supplying villa, resort and hospitality projects internationally. Logistics and door-to-door delivery covers freight by sea, air and rail, packing and container loading, customs paperwork and shipment tracking. Installation and after-sales support covers site guidance, inspection, warranty handling and spare parts — ask for the specific terms that apply to your order and country.

If the swim spa is part of a larger build, enquire about it as part of the package rather than alone. Poolside furniture, exterior cladding, paving and lighting are all specified around the same date; turnkey project solutions let those items be coordinated as one order with a single delivery window, which removes most sequencing problems on site.

A Simple Package To Send With Your First Message

  • Site photographs plus a plan with measurements and the access route.
  • Your intended installation method: above ground, semi-recessed or in-ground.
  • Primary use — training, hydrotherapy or family use — and who else will use it.
  • Electrical supply details and the distance from the distribution board.
  • The exact model designation you are asking about, plus alternative sizes you would consider.
  • Your delivery city or port, and whether you want a delivered price or an export price.
  • Any local approval requirement you have already identified.

Send those seven items and every quotation you receive will be built on the same assumptions. That is when comparison becomes possible — and when the cheapest number starts to look very different from the best value.

Ready to talk through a specific shell? Contact SANTERSON with your site measurements, installation method and delivery location, and ask for a configuration sheet covering internal and external dimensions, filled weight, pump and jet package, heater and insulation build, filtration access, water treatment and finish options — together with packaging volume and a delivered price to your site.