Ask a supplier for an outdoor dining set and the first reply is usually a catalogue number. The second question should be yours: what does the space actually need? Two layouts built on the same chair can behave very differently once guests, service staff and weather enter the picture. That is exactly why synthetic wicker outdoor dining sets are offered with two table top options — a round teak-look slat table and a square sintered stone table — and why the brief you hand over matters more than the finish you choose first.
Below is the measurement list and the set of project inputs we work from when this collection is specified for a resort, villa or café terrace. Send these details with your enquiry and the proposal comes back with seating capacity, layout logic and a realistic maintenance routine already built in.
Start With the Chair, Because Both Layouts Share It
In this collection the round and square versions use the same lattice-weave dining chair: an aluminium frame wrapped in all-weather rattan, with thick seat cushions and an open woven structure that stays breathable in hot climates. That shared base is useful for procurement. Once you have signed off one chair profile, only the table decision remains — so the inputs below concentrate on footprint, table top and use pattern.
Wicker shades, cushion colours and table dimensions can be adjusted for hospitality projects, which means a single resort can run the round version on the garden lawn and the square version inside the main al fresco restaurant without breaking the design story. If your scheme needs that consistency across zones, say so at the brief stage rather than after samples — bespoke finishes and textures are part of the custom & OEM service, alongside flexible minimum order quantities.
Measurements to Take Before You Request a Quotation
| What to measure | How to take it | Why the supplier needs it |
|---|---|---|
| Clear dining footprint (length x width) | Measure wall-to-wall or boundary-to-boundary, then deduct fixed obstacles: planters, columns, railings, heating units, door swings. | Sets the maximum table size and how many chairs fit without blocking circulation. |
| Circulation aisle behind pulled-out chairs | Allow room for a diner to sit down and for staff to pass behind them. Service aisles need more than guest aisles. | A layout that looks fine on paper fails the moment plates move through it. |
| Table height and seat height you are matching | Record the dining height of any existing table, and note whether a bar-height zone sits alongside it. | Mixed heights in one area read as a mistake unless they are planned deliberately. |
| Round table diameter or square table side length | Note both the current dimension and the largest dimension the space can absorb. | Diameter drives chair count faster than any other single number on a round layout. |
| Number of covers per zone, plus peak requirement | Count everyday covers separately from event or high-season peaks. | Peak demand may justify an extra table rather than an oversized one. |
| Floor level, drainage falls and surface type | Check for steps, uneven pavers, timber decking and where water runs off after rain or irrigation. | Determines whether adjustable feet are needed and how the set sits on wet ground. |
| Sun exposure and prevailing wind direction | Mark which side of the space faces open sky, and note exposed edges. | Informs cushion fabric choices and whether sets need a routine for moving or stacking. |
| Storage location and stack height available | Measure the store room, garage corner or covered area reserved for off-season pieces. | Determines how many spare chairs and loose cushions can be ordered and how they are stored. |
| Door widths, lift sizes and access route from kerb to terrace | Measure the narrowest point on the delivery path, including stair turns and gate openings. | Packages must physically reach the installation point; this is decided at order stage, not on delivery day. |
Record these in metres and millimetres, not in "small", "medium" or "about three metres". A supplier who receives numbers can produce a scaled layout; one who receives adjectives produces a guess.
Choosing Between the Round Teak-Look Table and the Square Sintered Stone Table
The two options are not interchangeable, and the difference is operational rather than decorative.
Round table with teak-look slat top. A round layout seats people around a shared centre with no sharp corners, which suits family villas, garden terraces and casual resort dining where the atmosphere matters more than seat count. The teak-effect slats create a warm, natural look that pairs easily with planting and timber decking. Because the surface is made of slats, cleaning follows the joints rather than a flat plane — worth building into the daily routine.
Square table with sintered stone top. A square or rectangular footprint packs more covers along a wall, a colonnade or a terrace edge, and its straight edges align cleanly with architecture. The sintered stone top suits high-use commercial settings where staff need a simple wipe-down each service. Where the brief is an al fresco restaurant turning tables through several sittings a day, this option usually earns its place on maintenance grounds rather than appearance.
Project Inputs That Shape the Specification
- Site category. Resort restaurant, private villa terrace, coastal café or mixed leisure zone. Each has a different wear pattern and a different tolerance for daily upkeep.
- Cover count per service and total covers across the season. This drives quantities, spares and whether one large table or two smaller ones performs better.
- Design intent. Send the mood board, finish palette or reference images. Wicker shade and cushion colour are decisions you should make against the scheme, not against a single product photograph.
- Existing furniture to match. If part of the terrace is already furnished, send those dimensions and finishes so new pieces align rather than clash.
- Maintenance policy. Who cleans the set, how often, and whether cushions come in at night. This single input decides table top choice more reliably than aesthetics.
- Budget band per cover. Stated early, it lets the supplier propose a configuration inside your range instead of a price you then have to cut down.
- Delivery address and access notes. Site logistics shape packaging, container loading and how the order is split into consignments.
If any of these inputs are still open, that is normal at concept stage. Our interior design service works through space layout planning, furniture layouts and 3D visual renderings before production begins, so an unfinished brief becomes a resolved drawing rather than a guess.
How This Collection Fits Into Wider Outdoor Furnishing
A dining set rarely stands alone. Terraces usually need lounge seating for waiting guests, a bar-height zone for drinks service, and lounging pieces near water. Where the woven look needs to carry through from lunch to sunset, the All-Weather Wicker Outdoor Conversation Sofa Set with Round Coffee Tables keeps the same material language in a lounge configuration. For service areas that need flexible capacity, the Extendable Aluminum Slat Dining Table with Matching Wicker Dining Set and Bar Table Stool Set covers square dining and high bar layouts in one family, which is helpful for café frontage and pool bars.
Specifying these pieces together in one order also simplifies freight, spare-parts planning and the eventual replacement cycle. That coordination is part of how outdoor furniture for villas and resorts is handled as a package rather than as separate purchases.
From Drawings to Handover
Once dimensions, finishes and quantities are confirmed, the process follows the same route as any project order: design and detail confirmation, then production with quality control, freight forwarding with customs paperwork, door-to-door delivery to site, installation and inspection. The turnkey solutions service covers this sequence for villa, hospitality and office projects, and custom work — wicker shade, cushion colour, table dimension — is handled through the same production coordination.
Freight is arranged by sea, air or rail with customs documentation and container loading planned around your access route, as described on the logistics and door-to-door delivery page. On arrival, installation, inspection and snagging are handled through installation and after-sales support, including spare parts for cushions and woven components that see the most wear.
Confirm the practical items in writing for your own site: what the delivery vehicle can reach, who unpacks and assembles on the terrace, which spare parts you want held locally, and how cushions and stone tops are to be cleaned day one onward. Those answers cost nothing to agree before an order and become expensive to negotiate afterwards.
Send the numbers first. Clear footprint, circulation widths, cover count, table height reference, storage space and access route — plus your maintenance plan. With those inputs, specifying a synthetic wicker outdoor dining set becomes a decision between two well-understood table tops instead of an argument about taste. Contact SANTERSON with your drawings and cover count, and the round teak-look or square sintered stone configuration comes back specified for your site.