A guest bathroom is judged in seconds, and a wall hung toilet with the floor left clear reads as clean and well planned. That is why concealed-cistern WCs keep appearing in boutique hotel specifications. This guide walks through how we specify our Wall Hung Toilet 1038W, a rimless vitreous ceramic wall mounted WC, for hotel fit-outs: what to check on the drainage side, how to group it with the rest of the bathroom package, and what to confirm before you place a project order.

Why wall hung WCs suit boutique hotel bathrooms

In a guest room bathroom the floor area is small and the housekeeping schedule is tight. A wall mounted WC with a hidden tank system leaves the floor empty, so housekeeping can mop straight through without working around a pedestal or a base seal. That single detail changes the daily cleaning routine in a corridor of identical rooms.

The 1038W is built around clean, minimalist lines and high-quality vitreous ceramic with a seamless glaze. Its compact proportions suit small bathrooms where a floor-standing pan would crowd the vanity. The rimless bowl design removes the hidden ledge that traditional rims create, so wiping the bowl takes one pass rather than a brush around an inner lip.

For hospitality work there is also a procurement argument. Repeating the same fixture across every guest room, service bathroom and public restroom keeps the specification consistent, and gives the operator one spare-parts line to manage years after handover.

Check the drainage before you fall in love with the bowl

The most expensive mistake in a wall hung toilet specification is ordering the pan before the waste route is fixed. The 1038W uses a 180mm P-trap wall drainage arrangement, meaning the waste exits through the wall behind the pan rather than down into the slab. That suits framed partitions and ducted cistern walls, but it does not suit every existing bathroom.

  • Confirm whether your waste is a wall outlet (P-trap) or a floor outlet (S-trap), and confirm the rough-in dimension on the setting-out drawing.
  • Confirm the concealed frame and cistern you intend to use are compatible with a 180mm P-trap pan and its trap offset.
  • Confirm the finished wall build-up — tile thickness, adhesive and the frame cavity — so the pan sits at the depth the frame was set out for.
  • Where an existing bathroom is being renovated with a floor outlet, a floor-standing model is usually the honest answer. Our Two Piece Washdown Toilet 1038A covers both arrangements with an 180mm wall P-trap and a 250mm floor S-trap option, which is why it often sits in the same project order as the 1038W for accessible and back-of-house bathrooms.

We do not publish fixed dimensions on this page. Every project receives the technical sheet for the exact production batch, so the trap centre, pan projection and seat fixings you build to are the ones you receive. Ask your contact for that sheet before the setting-out drawing is issued.

Specifying it as part of a bathroom package

Ordering fixtures one at a time is how fit-outs drift over budget and lose glaze-tone consistency. The 1038W normally travels with the other ceramics in the same container, from the same production run, so colour and seat profile match across the building.

A typical guest-room set built around the 1038W pairs it with a wall mounted wash basin of matching proportion — the Wall Hung Basin 1038WB is fixed to the wall on a back panel and takes no floor area either, with a bowl depth set to limit splashing. Across a guest room, an accessible room and two public restrooms, that grouping keeps the palette tight while allowing you to change sizes where the space demands it.

Because we manufacture furniture and building materials in the same group of factories, one purchase order can carry bathroom sanitary fixtures alongside vanity joinery, wall panelling, lighting and flooring. Having a single coordination point across those trades is where a project either saves weeks or loses them.

What we confirm with a hotel buyer before production

  • Quantity per floor and per room type, plus spares for the operator's maintenance stock.
  • The concealed frame brand and cistern you are using, so trap offset and actuator plate position are matched at our end.
  • Seat specification — soft-close or standard, and whether the seat ships with the pan or separately.
  • Packaging for container loading, including protection for the ceramic during ocean transit.
  • Custom and OEM options where a project calls for branded packaging or a different finish; see our Custom & OEM Service.

Our cooperation steps are straightforward: you send the brief and quantities, we return a quotation with the detail confirmed, then production, shipment and follow-up. Logistics and door-to-door delivery cover freight forwarding, customs paperwork and container loading; installation and after-sales support cover inspection, snags and spare parts. Terms, duties and transit arrangements are agreed case by case for the destination port — we do not quote them as a blanket promise.

A short specification summary

Model1038W Wall Hung Toilet
TypeWall mounted WC with hidden tank system; rimless bowl
MaterialVitreous ceramic with seamless glaze
Drainage180mm P-trap wall outlet
Typical useResidential bathrooms, boutique hotels, commercial restrooms
Dimensions & seat optionsConfirmed on the technical sheet for the production batch

Figures above come from our product listing. Dimensions, trap rough-in and any standard or certification claims are verified against the final technical sheet before they reach your drawing set — request it with your enquiry.

Specifying WCs, basins or a full bathroom package for a hotel or villa project? Send us the room count, floor plan and drainage arrangement, and we will return a quotation with the matching ceramics grouped for one container. Contact SANTERSON to start.