A materials schedule is the document that keeps a villa or hotel fit-out honest. It records, line by line, what each finish actually is, where it appears and who has to confirm it before production starts. Stone and marble are usually the hardest rows in that table: veining varies between slabs, sizes are made to measure, and the same surface may appear at the vanity, on a wall and inside a joinery detail. This guide shows how SANTERSON places Santerson Stone & Marble Surfaces inside a whole-project materials schedule, so the bathroom tops, wall panels and matching accents are specified once and ordered once.
Why stone rows break schedules more often than anything else
Most schedule failures come from treating stone as a picture rather than as a set of dimensions. A mood board image sells the look but says nothing about thickness, edge profile, cut-out position or joint location. When that row reaches procurement, three questions usually have no answer: which slab batch the veining comes from, whether the countertop and the wall panel were ordered together, and who measured the opening. Each unanswered question becomes a variation later.
The second cause is fragmentation. Countertops are bought from one supplier, wall cladding from another, vanities from a third. Three separate confirmations means three sets of shop drawings, three shipping windows and three chances for a tone mismatch between surfaces that sit centimetres apart. Grouping stone rows with the fixtures they physically meet — basins, vanities, mirror cabinets, cabinet lighting — removes most of that friction.
Where Santerson stone and marble entries belong in the schedule
The SANTERSON Stone & Marble Surfaces line sits in the Countertops & Basins collection for bathroom projects, with made-to-measure sizing and selectable material and finish. In a schedule it behaves as a horizontal surface row: vanity tops, double tops and any stone element that has to reconcile with a basin.
The wall equivalent is Stone & Marble Panels, listed under Paneling Systems, and there is a companion entry in the Custom Partitions & Paneling collection (Stone & Marble Panels). Both are specified by layout rather than by a fixed module: dimensions, material and finish are set per project, which is what allows a wall to continue the same surface as the top below it.
| Schedule row | What gets confirmed before production |
|---|---|
| Stone & Marble Surfaces (Countertops & Basins) | Overall size, thickness, edge detail, basin type and its cut-out or set-down position, splashback returns |
| Stone & Marble Panels (Paneling Systems / Custom Partitions & Paneling) | Panel layout and joint positions, panel size, fixings and setting-out against doors and reveals |
| Adjacent fixture rows | Basin fit, vanity carcass dimensions, mirror cabinet position, integrated lighting power points |
| Sample and sign-off row | Approved finish reference, signed shop drawing, release for manufacture |
Reading the collections side by side
The horizontal rows have to be written together with the fixtures they carry. Undermount Basin needs the cut-out dimensions resolved in the drawing, because the rim sits below the top. Vessel Basin (Above Counter) changes the story completely: the deck thickness, the tap reach and the clearance behind the bowl all become schedule items. Double Basin Countertop adds basin spacing and the position of two waste runs. Integrated Basin removes the joint altogether, which is often what a designer actually wants when they specify a continuous stone look.
Vertical rows follow the same logic. A stone wall that meets Integrated Countertop Vanity, a LED Mirror Cabinet or Integrated Cabinet Lighting has to carry the cut-outs, the fixing detail and the electrical provisions in the same drawing set. Write those dependencies into the schedule row itself; do not leave them to a site conversation.
Keeping stone consistent with the rest of the palette
Stone rarely stands alone on a project. Across the Paneling Systems range, Textured Panels, Matte Lacquer Panels, Glass & Glossy Panels and Wood Veneer Panels are configured the same way as the stone entries — made-to-measure sizing with material and finish options chosen per project. That shared configuration logic is what lets a bathroom wall mix stone with timber or lacquer without introducing two different tolerances, which is why those rows belong in one block of the schedule rather than in separate appendices.
For hospitality work the same block extends into turnkey project delivery, where the schedule has to survive guest-room repetition: identical stone rows across multiple bathrooms, with one approved reference and one signed drawing reused on every floor.
A practical sequence for stone rows
- Group the rows. Put tops, wall panels, basins, vanities, mirror cabinets and cabinet lighting for each bathroom into one section of the schedule, so nothing that physically touches gets confirmed separately.
- Fix the reference before the dimensions. Choose the material and finish, hold it as an approved sample, and record the reference code in the row. Dimensions move during a project; the approved finish should not.
- Measure and draw once for both directions. Countertop and wall panel go on the same setting-out drawing, with joints, falls where relevant, and every cut-out dimensioned from one common datum.
- Write the dependencies into the row. Basin type, tap position, waste route, lighting power point, door reveal — each becomes a checked item rather than an assumption.
- Order together and plan the delivery. One production release for matched stone reduces tone variation between surfaces that sit next to each other, and one shipping window keeps site sequencing simple.
What we confirm before manufacture
For every stone or marble configuration the project team signs off dimensions and selected specifications for that specific installation: material and finish, panel and top sizes, edge and joint details, and the fit with the chosen basin, vanity or lighting. Where a schedule covers several room types, each type gets its own signed row set. That single discipline — one approved reference, one dimensioned drawing, one release per configuration — is what keeps stone rows from becoming the reason a handover date moves.
If you are assembling a materials schedule for a villa or hotel fit-out and want the stone entries carried through together with the fixtures they meet, send the room drawings and the finish direction to SANTERSON and configured options will come back with dimensions and material choices for each row.