An outdoor swim spa is one of the few hospitality amenities that has to work as fitness equipment, a wellness facility and an exterior building element at the same time. That is why it arrives late in most project schedules: the architect wants it flush with the deck, the M&E consultant wants the electrical load settled, and the operator wants guests using it before high season. If you are specifying Outdoor Swim Spa WS-S06B-T for a hotel, resort or serviced-apartment scheme, the procurement questions below are the ones that decide whether the unit lands on site ready to install or sits in storage while details are argued out.
The short version of this article: treat a swim spa as a building service with a shell attached. Work through site access, structural loading, the electrical load and the sanitisation regime before you commit to a model, then have one supplier carry the spa and the deck furniture together so the delivery date and the responsibility stay in one place.

Start with the room the spa has to fit into
The catalogue lists WS-S06B-T at 5800 × 2200 × 1420 mm. In practice you should plan around three separate dimensions, not one:
- The unit itself — the shell envelope as catalogued.
- The access route — crane clearance, gate width, lift size or the deck panel that has to come off. A spa delivered to a rooftop terrace or a walled courtyard garden needs an access drawing before it needs a finish schedule.
- The maintenance zone — removable panels and pump access on all sides where the plant sits. Skimp on this and every future service call becomes deck demolition.
Depth of 1420 mm also affects structure and waterproofing. For an elevated or podium installation, get the slab loading and the wet-area detail resolved with the structural engineer before you place the order; a filled spa is a permanent live load, not furniture.
Read the specification as a list of decisions, not a datasheet
The catalogue record for this model shows the following. Each line is a decision point you should confirm in writing with your supplier and coordinate with the consultant team:
| Catalogue item | What to lock down before ordering |
|---|---|
| Dimensions 5800 × 2200 × 1420 mm | Final shell size, plinth or pedestal build-up, finished deck level, drainage falls around the surround. |
| Jet total: 40 pcs | Jet layout and seat positions. Jet count drives plumbing runs, and guest-facing seating arrangements change the value of the amenity. |
| Swim training system: 1 set | Whether the unit is being sold as a lap-swimming amenity or purely a spa. This changes how you market it and how many guests can use it at once. |
| Water pump: 1 pcs; Filter pump: 1 pc | Pump duty, run hours, filtration turnover and where the plant cabinet sits relative to guest rooms — noise travels. |
| Total power: 8.75 kW | The single most important line for your M&E consultant. Confirm supply voltage and phase, dedicated circuit, protection device, cable route and whether a heat pump option changes the connected load. |
| Control system: 1 set | Who operates it, where the controller is mounted, and how staff reset or lock out the unit between sessions. |
| LED lights: 3; 26 small LED lights | Fitting locations, colour scheme and whether lighting is tied to the ambience scene used across the rest of the exterior landscape. |
| Features shown: water jets, temperature setting, LED lighting, ozone, swim training system | Ozone as sanitisation versus optional UV sterilisation. Decide which one your hygiene regime and local water-health requirements actually need. |
Catalogue-listed options for this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so the option list in your quotation should be checked item by item rather than assumed.
Note: some catalogue pages show only part of a model's equipment schedule. Where an item is not listed — shell material, for example — it is an open question for the quotation, not something to assume from a similar product.
Hospitality-specific questions most residential enquiries skip
Duty cycle and running cost
A hotel spa runs on a schedule; a private villa spa does not. Ask for the filtration turnover rate, expected heater duty in your climate and what insulation is included as standard versus added as an option. Insulation is cheap at factory stage and expensive to retrofit on a finished deck.
Sanitisation regime
Ozone is shown as a feature on this model, and UV sterilisation appears in the options list. Guest-facing facilities usually need a documented water-treatment regime with logging. Confirm which system is included, what consumables it needs, and who supplies them.
Guest experience details
Steps are listed as an option — decide early, because moulded steps change the footprint and the deck detail. Agree handrail positions, non-slip surround finishes and lighting levels for night use before the shell is manufactured.
Service access after handover
Agree in the contract what happens when a pump, jet or control board fails during operation: spare parts supply, remote diagnosis, and on-site attendance. This is where Furniture Installation and After-sales Support matters for a swim spa just as much as it does for joinery — an amenity out of service becomes a guest complaint within a day.
Coordinate the spa with the rest of the outdoor package
A swim spa never sits alone. The pool deck also needs loungers, shade, storage and a wet area that drains properly — and all of it has to come from one supplier if you want a single delivery date and one point of responsibility. Grouping the spa with Outdoor Furniture for Villas and Resorts means one container, one packing list, one inspection visit and one set of finish approvals instead of three.
If the amenity is part of a wider wellness offer, look at adjacent products in the same category before fixing the layout. A Long Outdoor Swim Spa with Hydrotherapy & Relaxation Pool separates the swim channel from the jet zone, which suits a facility that wants lap swimmers and spa users at the same hour. Where the architecture is irregular — a curved terrace, an atrium void, a rooftop edge — Customizable Shape Outdoor Spa covers square, round, oval and curved shells on an acrylic body with structural reinforcement, which is often the way to keep a difficult plan tidy.
A procurement checklist you can actually issue
- Site pack first. Position plan, access route, structural loading, waterproofing detail and drainage falls — signed off before the shell is built.
- Electrical requirement in writing. Connected load against the catalogue figure of 8.75 kW, plus voltage, phase, circuit protection and the heat-pump option if selected.
- Configuration sheet, not a model number. Jets, pumps, filtration type, sanitisation method, lighting, steps, insulation and control system listed line by line in the order confirmation.
- Interface responsibility matrix. Who builds the plinth, who connects power, who fills and commissions, who hands over to operations.
- Delivery and lifting plan. Incoterms, container arrangement, offload method and delivery window against your site programme.
- Spare parts and service terms. Consumables list, critical spares held on site, and the escalation route during operation.
Because a swim spa sits at the boundary between equipment and construction, it is usually worth putting it under the same One-stop Furniture and Building Materials Supplier arrangement as the rest of the fit-out. One team then carries the specification, the freight consolidation and the site coordination, instead of three vendors pointing at each other's drawings.
Getting a quotation that is worth comparing
Send your supplier the same six things every time and quotes become comparable: location and access photos, target installation level, the configuration sheet above, the electrical constraint you have been given, your required site date, and the interface split you expect. A quotation built on that basis can be compared line for line with alternative bids; one built on a model number alone cannot.
SANTERSON works with project customers on furniture and building materials packages, and supports specification through Interior Design Services, space planning and production coordination, with freight by sea, air and rail under Furniture Logistics and Door-to-door Delivery. For hospitality schemes, the swim spa is normally procured as part of Hospitality Project Furnishing alongside the guest-room, bathroom and outdoor packages.