A swim spa on a hotel terrace or resort deck is not a single item you drop into a purchase order. It arrives as a small plant room with an acrylic shell, pumps, jets, filtration, lighting and a control system, and it has to sit in coordination with structure, waterproofing, power and daily operations. The following procurement walkthrough uses the Outdoor Swim Spa WS-PC05ST-S as the worked example, because its catalogue data shows exactly which questions a hospitality buyer needs answered before the order is placed.

Outdoor Swim Spa WS-PC05ST-S

Outdoor Swim Spa WS-PC05ST-S — compact swim and hydrotherapy unit in the configurable range.

What this model is designed to do

The WS-PC05ST-S belongs to a configurable outdoor swim and hydrotherapy range rather than to a fixed specification line. Its catalogue footprint of 5000 × 2400 × 1470 mm makes it a candidate for terraces, podium decks, villa-style hotel clusters and resort garden settings where a full-length pool is not feasible but guests still expect lap swimming and hydrotherapy in the same vessel. The swim training system lets a guest swim against a current in a five-metre basin; the water jets and ozone sanitisation cover the recovery and spa side of the same installation.

For a hospitality project, that combination matters commercially. One asset serves fitness, wellness and leisure programming, which is easier to justify in a capex submission than two separate installations competing for the same deck area and the same plant services.

Reading the catalogue specification as a buyer

The published figures below are catalogue values. Treat them as the starting point of a specification conversation with the factory, not as a final submittal — equipment included and electrical requirements depend on the configuration you select.

ItemCatalogue valueProcurement question it raises
Dimensions5000 × 2400 × 1470 mmDoes the deck, lift route and access path accept this footprint plus clearance for service access?
Control system1 setWhich control interface does operations staff need, and is it shared with other spa assets?
Swim training system1 setConfirm the swim current arrangement for lap programming and guest instruction.
Water pumpNot listed in catalogueConfirm whether a water pump is included in your configuration or ordered separately.
Filter pump1 pcConfirm filtration duty against expected daily guest occupancy.
Jet total6 pcsConfirm jet layout and count for the hydrotherapy zone you are marketing.
LED lights4 pcsConfirm lighting colour, control and night-time ambience against the landscape design.
Total power6.55 kWConfirm supply capacity, circuit protection and electrical requirements for your site.
Features shownWater jets, LED lighting, Ozone, Swim training systemConfirm which of these are standard and which are options in the quotation.

The row that most often surprises a project team is "Water pump: Not listed". On this model the catalogue does not state it, so the quotation must make the inclusion or exclusion explicit. If you compare two configurations without resolving that line item, you are comparing two different machines.

Options to decide before you request a price

Catalogue-listed options for this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so each option should be confirmed against the specific unit you are ordering. For a hospitality project, four of them usually drive both cost and operating profile:

  • Heat pump. Determines whether the spa runs warm year-round or seasonally, and it changes the electrical load you must reserve on site.
  • Insulation. Relevant for heated operation, energy consumption and for installations in cooler highland or southern-site locations.
  • Sand filtration versus the standard filter pump. Affects maintenance routine, backwash arrangements and where drainage must be provided.
  • Steps and access. Guest safety and accessibility expectations differ between a resort pool deck and a private-villa terrace, and steps affect the surrounding deck finish.

Where a project's layout does not suit a rectangular basin, the range also covers Customizable Shape Outdoor Spa options in square, round, oval and curved designs with an acrylic shell and structural reinforcement — useful when the spa is set into a designed terrace rather than placed on it.

Site conditions to fix before production starts

The unit itself is factory-built; what fails on site is usually the interface. Lock these down while the order is in production:

  • Structural loading. A basin of this footprint holds a large mass of water plus guests. Get the structural engineer's sign-off on the deck or slab before delivery, not after.
  • Power. The catalogue figure is 6.55 kW total power. Have your electrical consultant confirm supply, protection and earthing for the selected configuration in your jurisdiction.
  • Drainage and waterproofing. Backwash, overflow and maintenance draining need a designed route, and plant-room drainage needs to be part of the waterproofing detail.
  • Delivery route. Confirm that the unit can reach its final position — crane lift, hoist, or ground-level path — and that the access width matches the shell dimensions.
  • Surrounding finishes. Deck level, coping, and any enclosure should be dimensioned against the confirmed catalogue size of the ordered unit.
Practical rule for hospitality procurement: do not release the swim spa order until the structural and electrical consultants have seen the same configuration sheet that the factory will build to. Specification drift between consultant drawings and the purchase order is where most rework cost appears.

Ordering it as part of a wider package

A swim spa rarely arrives alone on a hotel or resort project. It is usually accompanied by poolside loungers, shade structures, outdoor dining sets and the adjacent interior fit-out — bathroom fixtures, lighting, flooring and cabinetry for the changing areas and guest suites that serve it. Coordinating these through Turnkey Solutions means one party handles design coordination, production scheduling and shipment consolidation instead of several suppliers working to separate programmes.

SANTERSON works as a China-based one-stop furniture and building materials supplier, operating since 2008, with services covering interior design support, custom and OEM production, door-to-door logistics, installation and after-sales support. For projects that need the spa matched to a wider outdoor and interior package, that single point of responsibility shortens coordination between the pool contractor, the FF&E supplier and the fit-out team.

Where finishes or dimensions must change to suit the site — deck-edge detailing, colour and material matching with adjacent furniture, or bespoke sizing within the configurable range — Custom & OEM Service covers design and prototyping, material and finish selection, and flexible order quantities.

A short procurement checklist

  • Confirm the ordered configuration in writing: control system, swim training system, filter pump, water pump inclusion, jet count, LED count and ozone.
  • Confirm electrical requirements for the selected configuration against your site supply, including any heat pump added later.
  • Confirm catalogue dimensions with the factory before fixing deck levels, coping and enclosure dimensions.
  • Get structural sign-off for water load plus live load on the intended position.
  • Agree packaging, container loading, shipping terms and delivery address scope in the contract documents.
  • Agree installation responsibility, inspection items and the spare-parts position before handover.

If you are scoping a swim spa for a hotel, resort or villa project, send the location, expected daily occupancy and your preferred configuration options and we will confirm equipment inclusion, electrical requirements and delivery arrangements for that specific unit.

Talk to us about your project

Contact: PHILLIP  |  Phone / WhatsApp: +86-13928214007  |  Email: santerson@qq.com

Factory and head office: Longjiang, Shunde, Foshan, China. Offices in Vietnam, Singapore and South Africa.