A glass front display cabinet looks simple on a drawing. It is a box with a glazed door, and most proposals for it arrive as a one-line item on a joinery schedule. That is exactly why the item gets signed off quickly and why problems surface later — on site, at handover, or six months into operation when the glass has fogged, the shelving has sagged or the lighting driver has failed behind a sealed panel.
If you are a procurement manager, contractor or developer evaluating a quotation for display joinery in a hotel, serviced apartment, sales gallery, clubhouse or branded residence, the useful question is not "how much per linear metre". It is whether the proposal contains enough information for you to compare two suppliers honestly and to install the units without variations. The checklist below follows the order in which those gaps normally appear.
1. Does the proposal describe made-to-measure work, or a catalogue size?
Display casework sits against walls that are never quite plumb and under ceilings that are never quite level. A proposal that quotes a standard width and height is quoting a product, not a solution — and the site team inherits the gap. Ask for confirmation that dimensions are taken to the opening and drawn to it, with a shop drawing showing overall height, depth, carcass thickness and how the unit meets the floor, ceiling and adjacent joinery.
On our side we build these units to project-specific size, layout and finish, so the dimension set on the drawing is the dimension that is manufactured. Our Glass Front Display Cabinets page states this configuration basis plainly; treat a supplier who cannot state it as quoting stock.
2. Is the glazing actually specified?
"Glass door" is not a specification. A comparable proposal names the glass type and thickness, the edge treatment, the tint or clarity, and what happens when something heavy leans against it. For cabinets in a public corridor, lobby or guest-facing area, ask directly whether the glazing is safety-rated for that location and who takes responsibility for confirming the requirement — the supplier, the designer or the local authority. A quotation that stays silent on this point is transferring the risk to you.
- CheckGlass type, thickness and whether it is tempered or laminated.
- CheckClear, low-iron, bronze, smoked or frosted — and a physical sample, not a printed swatch. Tint reads very differently at 10 mm thick than on a brochure page.
- CheckHow the glass is seated: rebate, silicone set, glazing bead, or structural fixings.
- CheckHinge side, opening direction and handle detail on the elevation drawing.
3. Who carries the shelf load?
Display cabinets fail at the shelves far more often than at the doors. Glass shelves in particular are quoted as an aesthetic choice and installed as if they were timber. For each shelf line, ask for the span, the material, the support method and the load the supplier will stand behind — and state what you intend to display. Porcelain, metal trophies, hardback books and glassware all weigh more than the styling photograph suggests.
Where the design calls for glass shelves, get the specification in writing before the carcass is cut, and confirm the fixing detail with the same supplier who builds the cabinet. Splitting shelf engineering between two vendors is how blame gets divided later.
4. Is the lighting designed in, or added on?
An illuminated cabinet is an electrical product inside a furniture product, and it is the single most common source of post-handover service calls. A serious proposal shows where the fittings sit, how they are powered, where the driver is accessible, how the cable exits the carcass, and how the fitting is replaced without removing the cabinet from the wall.
Compare the two approaches side by side:
| Proposal reads | What to ask before you sign |
|---|---|
| "LED strip supplied" | Fitted or loose? Where is the driver, and can a technician reach it? What colour temperature and rendering, and does it match the lighting schedule used elsewhere in the project? |
| "Illuminated display cabinet" | Which shelves are lit, is the light direct or diffused, and is there a visible hot spot on the glass at viewing height? Our Illuminated Display Cabinet is configured with the lighting resolved against the layout, so electrical details are confirmed with the project rather than chosen on site. |
| "Switch to suit" | Sensor, door-activated or wall switch? Who supplies the backbox and the electrician's first fix? |
If the same supplier also handles casework elsewhere in the building, ask them to coordinate cabinet lighting with the wider integrated cabinet lighting schedule. One driver strategy across the project is worth more than a marginally cheaper strip.
5. Does the carcass finish match the rest of the joinery?
A display cabinet rarely stands alone; it abuts wall panelling, media units or kitchen cabinetry. The proposal should name the substrate, the finish system and the colour reference in a form you can hold another supplier to — a manufacturer code plus physical sample, not a phrase such as "to match". Ask how the inside face of the carcass is finished, because a glazed door shows the interior surfaces constantly, and how the finish behaves where it meets glass.
Where display units are part of a larger fit-out, ask for them on the same finish schedule as the wall-mounted display cabinets, curio cabinets and any adjacent storage walls. One schedule, one sample set, one batch — that is what keeps veneer and lacquer reading consistently under the same lights.
6. What does the price actually include?
Compare quotations on scope, not on number. Before you rank two bids, confirm in writing which of these each one carries:
- ScopeShop drawings and a sign-off stage before production starts.
- ScopePackaging suited to glazed units travelling internationally, plus the container loading plan.
- ScopeFreight mode, customs documentation and delivery to site or to port.
- ScopeInstallation, snag inspection and a named route for spare parts such as replacement glass, shelves and drivers.
- ScopeWhat is excluded — first-fix electrics, wall strengthening behind wall-hung units, site making-up of openings.
A bid that looks 15% cheaper usually excludes one line from this list. Finding that out at tender evaluation costs you nothing; finding it out after the order is placed does.
7. How are variations and site conditions handled?
Ask what happens when the wall moves, the ceiling set-down changes or a services run appears where the drawing said there was none. A supplier working to your drawings will issue a query; a supplier working to their own standard sizes will simply build around it and let you discover the result. Confirm who revises the drawing, whether that revision is charged, and how quickly — this matters most on projects where display casework is ordered late in the programme.
8. What evidence supports the supplier's claims?
Capability statements are easy to write. Ask instead for drawings and photographs from a comparable project, the name of the market segment they regularly serve, and confirmation of who inspects before shipment. We have been manufacturing furniture and building materials in China since 2008 and supply one-stop furniture and building materials for hospitality, villa and office projects, covering design consultation, custom and OEM production, door-to-door delivery, installation and after-sales support under one scope — which means the display cabinets, the joinery they sit against and the lighting inside them come from one accountable source rather than three.
Send us the schedule line, the elevation and what you intend to display, and we will return a proposal that states dimensions, glazing, shelf loading, lighting detail and finish reference — so the next quotation you receive can be compared against it line for line.
Two items are worth closing before any order is released: the safety rating of the glazing for its location, and the accessibility of the lighting driver. Both are cheap to resolve on paper and expensive to resolve on site.