A shower set quotation looks simple on paper. One line item, one photo, one unit price. Then the site installer reports that the wall outlet spacing does not match, the temperature display has no power source nearby, or the finish on the sample is not the finish shown in the rendering. This article walks through how a buyer, contractor or procurement officer should read a manufacturer’s proposal for a gun grey digital display rain shower system, wall mounted bathroom shower set with handheld sprayer — what the document must state, what you should send them, and where disputes usually start.
1. Why this product type draws more questions than an ordinary shower mixer
A wall mounted set with an overhead rain shower, a handheld sprayer on a slide bar and a digital temperature screen is not a single fitting. It is a small assembly of valves, a diverter, a fixed spout body, a flexible hose, a mounting bracket and an electronic display module. Each part carries its own failure mode and its own replacement path.
The digital display is the part most often left unspecified. Some sets in this category run the screen from household power; others use a hydropower generator driven by water flow, so no electrical point is needed behind the tile. SANTERSON publishes both approaches — the gun grey set described as having a real-time digital temperature display, and a white hydropower digital shower system whose LED screen is described as working with water flow without battery or external power. Which one you are quoting changes the first-fix electrical work, so confirm it in writing before the wall is closed up.
2. Send a fixture schedule, not a product enquiry
The quality of the proposal you get back is set by the brief you send. A fixture schedule for a bathroom package should carry, per room or per room type:
- Room count and bathroom type (guest, master, guest suite, staff, common amenity), with the mounting wall construction — masonry, stud with nogging, or timber frame.
- Hot and cold supply positions and heights, plus available mains pressure and any pump or tank arrangement.
- Whether a power point is available at shower height, and if not, whether a power-free display is required.
- Required finish across the project — gun grey matte, white matte, chrome or another colour — so matching sets are quoted rather than mixed.
- Quantity per model, split by phase, and the delivery address for each phase.
Send that, and a manufacturer who also supplies bathroom sanitary fixtures can price the shower set alongside basins, WCs and mirrors from one specification, which removes most of the coordination arguments later.
3. Check the scope of supply line by line
Product copy for these sets typically states that installation accessories are supplied. Treat that as a starting point and ask for an itemised packing list in the proposal. The line items you want to see named:
| Item | What to confirm on the quotation |
|---|---|
| Overhead rain shower head | Shape and size as stated, fixing type, whether the arm is included or ordered separately. |
| Handheld sprayer and hose | Number of spray functions, hose length, hose material, bracket type. |
| Slide bar | Included or optional; stated adjustment range; bracket fixing method. |
| Body, valves and diverter | Valve type, whether thermostatic mixing is built in, cartridge material and replaceability. |
| Digital display module | Power source (mains or hydropower), what the screen reads, replacement route if it fails. |
| Mounting bracket and fixings | Included; suitability for your wall construction; whether a rough-in valve box is needed. |
| Rough-in / concealed valve box | Often the single most expensive surprise. Ask explicitly whether it is in or out of scope. |
| Spare parts | Cartridges, hoses, diverter and display module availability after the main order ships. |
Where a set’s published description mentions features such as a storage platform or ambient light, check whether that feature belongs to the model in front of you. Similar wall mounted sets in this range differ in those details, and an assumption carried across models is a common source of variation claims at handover.
4. Match the specification to the water and power reality on site
A rain head of the wide square type shown on these sets needs volume as well as pressure to give an even rainfall spray. Ask the manufacturer what supply pressure and flow they designed the overhead head for, and compare that with your measured or designed figures. If the project runs from a tank, or the riser is long, this question decides whether you need a pump upgrade before ordering rather than after.
For the display, settle three things in writing:
- Power source and, if mains powered, the required cable route, isolation location and compliance responsibility for that electrical work.
- Whether the quoted set is intended for concealed or exposed installation, since that changes first-fix timing.
- What happens to the display function if water pressure falls below the level the generator or valve needs.
These are not manufacturer niceties. They decide who carries which scope on your programme, and they should appear in the proposal as named line items rather than as a footnote.
5. Finish, samples and the matte surface claim
Gun grey is a coated or anodised finish, and its appearance depends on the process, not the colour name. Two suppliers can quote “gun grey” and deliver visibly different tones and sheen levels. Product copy for this set describes a matte surface that resists water stains and fingerprints and is easy to maintain; treat that as a claim to verify on a physical sample under your own water and cleaning regime, not as a tested result.
Wall mounted gun grey set with square overhead rain shower, handheld sprayer on a slide bar and digital temperature display. Use the sample, not this image, to sign off tone and sheen.
6. Service, spares and what “after-sales” actually covers
A digital shower set will be maintained by a local plumber, not by the factory that shipped it. That makes three clauses in the proposal more important than the unit price:
- Spare-part supply. Which parts are stocked, for how long after delivery, and the lead time and cost of a replacement display module or cartridge.
- Warranty terms. Duration, what is excluded, whether seal kits and cartridges are consumables, and who pays freight on a failed part.
- Installation support. Whether printed instructions and a technical drawing in your measurement units are included, and whether remote or on-site guidance is available for the trade doing the fit-out.
SANTERSON’s installation and after-sales service page lists on-site installation, inspection and snagging, warranty coverage, spare parts and replacement, and ongoing maintenance. Response-time figures on that page are stated as company aims; confirm the actual terms, exclusions and local availability for your project in the contract before relying on them.
7. Packing, delivery basis and phased quantities
Shower sets with large overhead heads pack awkwardly and are damaged in transit more often than ceramics. Ask the proposal to state carton dimensions and weights per set, the packing construction, and the total shipment volume, so you can compare landed cost rather than just unit price. If your project takes delivery in phases by floor or building, say so at quotation stage; it affects production runs, container mix and how many spare sets you hold on site.
The company’s logistics and door-to-door delivery page describes freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery. Import terms, duties and transit time for your country still need to be agreed case by case and written into the order.
Order a small over-quantity of complete sets and a spares kit per bathroom type. On a multi-unit job the sets installed first are the ones that get damaged during later trades’ work, and matching a discontinued finish two years later is expensive.
8. Comparing two proposals on a like-for-like basis
Line up competing quotations in one table before you decide. Score them on the same six points, and put the excluded items in the same column for each bidder so the gaps are visible:
| Evaluation point | Strong proposal | Weak proposal |
|---|---|---|
| Scope of supply | Itemised packing list, rough-in box stated as in or out | “Complete set” with no breakdown |
| Display power | Power source named, wiring responsibility assigned | Not mentioned |
| Water performance | Design pressure and flow stated for the overhead head | Marketing wording only |
| Finish | Process specified, sample supplied before order | Colour name only |
| Spares and warranty | Part list, availability period, freight responsibility | “Warranty available” |
| Delivery | Carton data, phased quantities, Incoterms stated | Unit price only |
If a bidder also supplies other fixtures for the same package, check whether the shower set can be bundled with the rest of the interior fixtures under one order and one delivery schedule. One coordination point across bathrooms, cabinetry and lighting usually saves more than a small unit-price difference.
9. A pre-order checklist
- Model number on the quotation matches the sample you approved, including finish code.
- Packing list confirms every component in section 3, and states whether a rough-in valve box is included.
- Display power source confirmed; electrical responsibility assigned to a named party.
- Design supply pressure and flow for the overhead head checked against site conditions.
- Slide bar adjustment range suitable for the users of that room type.
- Spare-part list, availability period and prices agreed before production starts.
- Warranty duration and exclusions read; consumables identified.
- Carton dimensions, weights, Incoterms, delivery address and phase split written into the order.
- Over-order quantity for on-site damage agreed per bathroom type.
Send us your fixture schedule
SANTERSON is a China-based manufacturer and one-stop supplier of furniture and building materials, supplying wall mounted shower sets alongside basins, WCs, vanities, cabinetry, lighting and interior finishes for villa, hospitality and apartment projects. Share your room-by-room fixture schedule, mounting details and available water pressure, and we will quote the matching set with an itemised packing list, finish specification and phased delivery plan. Enquiries are handled through our contact page.