A double basin countertop looks simple on a specification sheet: two bowls, one slab, one set of taps. On site it is where the problems appear — cut-outs that do not match the basins, waste outlets that clash with the trap run, bench heights that fight the mirror above, and finishes that arrive in a different tone from the sample signed off at tender. If you are sourcing Santerson Double Basin Countertop for villas, serviced apartments, hotel guest rooms or a commercial fit-out, the supplier conversation is worth more than the unit price. The questions below are the ones that decide whether the vanity works the first time.

What the product page actually commits to

Before comparing suppliers, be clear about what this line of product offers. The Countertops & Basins range — which also covers Santerson Stone & Marble Surfaces, Santerson Undermount Basin and Santerson Vessel Basin (Above Counter) — is described as made-to-measure, with finish, layout and dimensions specified per project. There is no fixed catalogue width to compare against, and the published page does not state slab material or thickness.

That configurability is the point of buying this way, and it is also why supplier comparison matters so much. When dimensions, substrate, edge profile and basin type are all chosen per job, the quality of the outcome depends on how carefully the supplier takes the specification and how early they come back to you with conflicts. Treat every figure below as something to confirm in writing for your own project, not as a published constant.

Seven questions that separate suppliers

1. Who draws the cut-out dimensions?

Ask which party issues the dimensioned drawing for basin position, tap holes and waste outlets — and whether it is issued before you fix the basin, tapware and trap on site. A supplier who returns a shop drawing with cut-outs, tap centres and overflow positions marked lets your plumber verify the trap run before anything is cut. A supplier who only confirms overall length and depth has left the interface risk with you.

2. Which basin type is being quoted?

The same bench can carry an undermount bowl, a vessel sitting above the counter, or a basin integrated with the countertop. Each changes slab thickness, edge detail, sealing, and how the waste drops into the wall or floor. Ask for the quotation to name the basin type per bathroom type, not just "double vanity". If the same project also uses an Santerson Integrated Countertop Vanity elsewhere in the building, ask how the two details will be kept consistent across room types.

3. How is slab material and thickness specified?

Ask for material, thickness and edge profile to be written into the order confirmation with a named reference for colour and veining. For stone and marble surfaces, request that the supplier confirm which slab batch or sample the production piece will follow, and how variation is handled between units in one bathroom group. Two guest bathrooms in a hotel are read side by side by guests; visible mismatch reads as poor workmanship even when both pieces are within tolerance.

4. Is basin spacing set for two users at once?

Double basins fail when the bowls are pushed apart only to fill a long wall, leaving no usable landing between taps and no room for elbows. Give the supplier the clearances you need — minimum distance between basin centres, distance from each basin centre to the side return, and the depth of the bench in front of the bowl. A competent supplier will flag when your requested overall length cannot carry two bowls with those clearances, rather than simply drawing what you asked for.

5. What happens under the counter?

Countertop and vanity carcass are usually separate line items on a bill of quantities. Ask whether the countertop supplier is also producing the Santerson Double Vanity or Santerson Floating Vanity beneath it. When one supplier carries both, the fixing detail, drawer clearance below the waste, and the notch for traps are coordinated in one workshop instead of reconciled on site with silicone.

6. How are mirror, lighting and splashback coordinated?

Bench height only works if the mirror and light above it are known. Ask how the supplier will coordinate a Santerson LED Mirror Cabinet or Vanity Lighting with the countertop setting-out, and who confirms electrical locations before tiling. This is the interface that most often produces rework: the tile is fixed, then a mirror is found not to clear the taps.

7. How are variations and site damage handled?

Cut stone arrives chipped more often than anyone admits. Ask what happens when a piece is damaged in transit or on site: whether a replacement can be matched to the original batch, what lead time applies for a single re-make, and how a late design change is priced once production has started. The answer tells you whether the supplier is set up for project work or only for one-off sales.

How to read the comparison

Point of comparison Weak answer Answer you want for project work
Specification method Quotes a standard size and asks you to confirm on site Issues shop drawings per bathroom type, signed off before production starts
Material and finish Describes the surface in words only Names the material, thickness, edge profile and sample reference in writing
Scope around the bench Sells the slab only; everything else is your other trade Can also supply vanity, mirror cabinet and vanity lighting from one specification
Consistency across units No comment on batch or veining variation Explains how units in the same room group are kept consistent
Delivery arrangements States a lead time with no packaging or freight detail Explains crating, container loading and door-to-door arrangements for your destination
After supply Directs you to the fitter for any issue Has a stated route for snags, replacement pieces and spare parts

Run this as a single sheet across every quotation you hold. Where an answer is vague, ask for it again in writing before award — a supplier who will not commit on paper at quotation stage will not commit during production either.

Why one supplier for the whole bathroom reduces interface risk

A guest bathroom carries far more than the countertop: ceramics, shower set, mirror cabinet, storage, lighting and finishes. Each separate supplier is one more drawing set to reconcile and one more party to chase when something does not fit. Working with a bathroom fixtures supplier who also handles joinery, lighting and other interior products means the interfaces between counter, vanity, mirror and wall finishes are resolved in one workshop before anything is shipped.

SANTERSON works this way on villa, hospitality and office projects — furniture and building materials supplied together, with interior design services covering space planning, product specification and production coordination, and custom & OEM service for bespoke sizes, materials and finishes. If your project is outside China, the same team handles freight by sea, air or rail with customs paperwork and door-to-door delivery, then supports on-site fitting and after-sales through installation and after-sales support. The overall model sits under turnkey interior project solutions for villa, hospitality and office work. Ask for the current terms that apply to your destination rather than assuming published service descriptions cover it.

A pre-award checklist for the countertop package

  • Dimensioned shop drawing per bathroom type, including basin centres, tap holes and waste positions.
  • Written confirmation of slab material, thickness, edge profile and the sample or batch reference being followed.
  • Basin type named per room: undermount, vessel above counter, or integrated with the countertop.
  • Vanity carcass confirmed as in scope, with drawer and trap clearances shown on the drawing.
  • Mirror cabinet or vanity lighting position confirmed before tiling, with electrical locations agreed.
  • Crating, container loading and delivery address confirmed for your site, not just a port.
  • Written route for damaged pieces or late design changes, including who pays for a re-make.

Send the supplier your bathroom layouts and elevations at enquiry stage, together with the tapware and basins you intend to use. Suppliers compare well or badly on the drawings they send back — and that comparison costs nothing before award.

Every dimension, material and clearance discussed above should be confirmed in writing for your specific project before production begins. If you want a quotation for a double basin countertop package across several room types, send your drawings to the SANTERSON project team and we will return shop drawings for review.