A wall-hung vanity unit is one of the least forgiving items in a bathroom fit-out. It arrives as a heavy carcass with a stone or engineered-stone top, concealed drawer runners, and often an integrated basin — all of which have to survive ocean freight, inland handling and a lift ride to the bathroom floor. Before you place an order for a Santerson Floating Vanity, the packaging conversation is worth having in writing, because it determines what arrives intact, what your site team can actually install, and what you end up paying for twice.
Why packaging matters more for a wall-hung unit than for a freestanding one
Our floating vanities are made to measure: dimensions, material and finish are specified per project, so a damaged unit is not something we can swap off a shelf. A replacement means restarting the production slot, re-cutting the top to the same opening, and re-matching a veneer or lacquer batch to the rest of the bathroom joinery. That is why the packing method should be agreed at quotation stage rather than assumed at shipping stage.
The second reason is that a floating vanity carries its load through the wall, not through legs. Anything wrong with the carcass squareness or the fixing positions shows up immediately once the unit is hung, and there is no way to shim it out the way you would a freestanding cabinet. Packaging that lets a carcass shift in transit can bend the back rail or distort the drawer openings — damage that is easy to miss on the dock and impossible to miss at handover.
Seven points to confirm before production starts
- Carcass and top packed separately or together. A made-to-measure top is usually crated flat on its own pallet with corner protection; the carcass travels upright. Confirm which method applies to your configuration, because it changes both the crate count and the unloading sequence on site.
- Crate type and stacking rules. Ask whether the units ship in plywood crates, cardboard-over-pallet or a mixed pack, and whether the crates are marked as non-stackable. If your container plan stacks other joinery on top of a vanity crate, that decision needs to be made by the person loading the container, not by the forwarder at the port.
- Fixing hardware and wall-bearing notes. Wall-hung units need fixings suited to the actual substrate — stud, brick, or block with a timber batten frame. Confirm what is included in the crate, and send us the wall build-up for each bathroom so the fixing detail matches what your builder is framing.
- Basin, countertop and tapware interface. If your specification pairs the vanity with an integrated countertop vanity top or a separate basin from our ceramics range, confirm who supplies the cut-out template and where the tap holes sit relative to the finished edge. Templates travel with the tops; if they are packed loose they get thrown away.
- Packing list detail per bathroom. For multi-bathroom villas and hotel floors we recommend labelling every crate with the room number from your drawings, not just a carton sequence number. A packing list that reads "6 cartons" tells your site supervisor nothing at 7am on installation day.
- Inspection points on arrival. Agree in advance what counts as transit damage and how to photograph it — crate exterior, then inner packaging, then the unit itself, before anything is carried inside. Claims are only as good as the photographs taken at the container doors.
- Spare parts and finish touch-up kit. For larger orders ask whether edge banding, spare runners, handles and a small quantity of matching finish material travel with the shipment. On site, a missing runner can hold up one bathroom for a week; a replacement shipped later holds it up for a month.
How this fits into container planning
Most of our project customers consolidate vanities with other joinery and finishes in one shipment: wardrobe carcasses, kitchen cabinetry, doors, engineered oak flooring and wall panelling all travel together. That is efficient, but it means the packing method for each line has to be decided as a set. A floating vanity crate placed next to a stack of loose wall panels is a different problem from a vanity crated with its own top and fixings.
Our logistics team handles freight forwarding by sea, air and rail, along with the commercial paperwork — invoices, packing lists and certificates of origin — and works through container loading with you before the doors close. Terms, duties and transit times are confirmed case by case for each destination rather than quoted as a blanket service level, so the same care applies to packaging: we agree it against your drawings and your site's access conditions.
A short pre-production checklist
| Item to confirm | Who provides it | When |
| Finished dimensions and wall build-up per bathroom | Buyer / builder | Before quotation |
| Crate method, stacking and labelling by room number | Supplier | At order confirmation |
| Fixing set matched to substrate | Supplier | Before production |
| Cut-out templates for tops and basins | Supplier, packed with tops | With shipment |
| Arrival inspection and photo protocol | Buyer / site supervisor | Before container unloading |
None of these points take long to settle, and each one removes a decision that would otherwise be made by someone who has never seen your drawings. If you are specifying floating vanities as part of a wider bathroom or whole-house package, send us the room schedule early and we will confirm packing, fixing and interface details against it — the same way we work through turnkey villa and hospitality projects from design through to handover.