A swim spa that doubles as a lap pool and a hydrotherapy tub is one of the more demanding items on an Australian project specification. It arrives as a shell, a pump room, an electrical load and a set of local connections that have to line up before the first water fill. The Outdoor Swim Spa WS-130Aⅲ is a good example of why the paperwork around the order matters more than the brochure photograph. Below is the checklist our project team works through with buyers in Sydney, Melbourne and Perth before a unit of this size leaves the factory.
Start With What the Catalogue Actually Says
The published catalogue entry for WS-130Aⅲ lists an overall shell of 8000 × 3000 × 1400 mm, one control system, one swim training system, one water pump, one filter pump, twenty jets, seven LED lights and a total power figure of 10.85 kW. Those numbers are the starting point of a conversation, not the end of one. Two units with the same footprint can draw very different loads depending on which options are fitted.
Compare the -U variant in the same family: identical 8000 × 3000 × 1400 mm dimensions, but four water pumps, twenty-three jets, five LED lights and a total power figure of 11.85 kW, with no swim training system recorded against it. Same length, same width, different plumbing and a different electrical demand. That is exactly the difference an electrician and a hydraulic consultant need to see in writing before they price their own scope.
Catalogue data for WS-130Aⅲ as published
Shell: 8000 × 3000 × 1400 mm · Control system: 1 set · Swim training system: 1 set · Water pump: 1 pc · Filter pump: 1 pc · Jets: 20 pcs · LED lights: 7 · Total power: 10.85 kW
Catalogue-listed options include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability varies by model, so the configuration you order has to be confirmed against the final specification sheet rather than assumed from a catalogue page.
Six Things to Verify Before You Confirm an Order
1. The exact model suffix
Model codes in this range carry suffixes that change the equipment list, and some suffixes appear in both a standard and an -U form. Ask for the full code on the quotation, then check it against the specification sheet line by line. A quotation that reads "8m swim spa" without a suffix is not yet comparable between suppliers.
2. Total power, and how it will be supplied
Take the total power figure to your electrical contractor early. They need to confirm the supply arrangement, protection and cable sizing on site, and whether the figure quoted is a component sum or a measured maximum demand. Ask the manufacturer directly which one it is. Insulation and heat pump options also change running behaviour, so decide them before the electrical design is frozen rather than after.
3. Which equipment is included and which is optional
Ozone, UV sterilisation, sand filtration, heat pumps, steps and additional pumps sit in the optional column on many configurations. A jet count that includes swim nozzles is not the same as a jet count that counts hydrotherapy seats only. Get an itemised list with quantities, so nothing has to be bought locally at a premium once the shell is on the ground.
4. Site access and the delivery route
An eight-metre shell needs a delivery plan. Confirm the truck size your site can take, whether a crane or forklift is required to set the unit, and who arranges it. Our logistics and door-to-door delivery service covers freight booking, packaging and container loading, customs paperwork and shipment tracking, but the last leg onto a site is a joint decision with your builder. Send the delivery address and access photos at quotation stage, not at dispatch.
5. Foundations, drainage and the plant space
The slab, its levelling tolerance and the drainage around the shell are local scope in almost every project we supply. So is the pump compartment access: a jet or a control module eventually needs a hand to reach it. Ask for the base frame drawing and the equipment layout before your concrete contractor pours, and check that service access is not blocked by cladding or decking.
6. Approvals and local requirements
Pool fencing, barrier and registration rules in Australia are set by state and local authorities and apply to swim spas as well as pools. Those approvals sit with the buyer and their certifier. We can supply product documentation and drawings for that process; we cannot tell you what your council requires. Build the approval timeline into the programme alongside production.
How a Custom Configuration Moves Through Production
Where a standard catalogue configuration does not suit a plan, the custom and OEM service covers bespoke material finishes, prototyping and flexible minimum order quantities, with 3D modelling used before tooling or cutting begins. For swim spas this usually means option packages, insulation levels for cooler climates such as Melbourne, step arrangements and control placement.
The working sequence on the interior design services side is straightforward: a project brief and design proposal, then a quotation with detail confirmation, then production, shipment and follow-up. The point of the middle step is that every option, quantity and drawing is signed off before manufacturing starts. Change orders after that point move the delivery date, which is why buyers who settle the specification sheet early are the ones whose dates hold.
A Quick Comparison for Buyers Shortlisting the Range
| Item to confirm | Why it changes the price and the programme |
|---|---|
| Model suffix and specification sheet | Determines pump count, jet count, swim system presence and total power |
| Total power basis | Drives the electrical scope on site; ask whether it is a component sum or maximum demand |
| Heat pump and insulation options | Affects running cost and heating performance in cooler Australian climates |
| Filtration route (cartridge, sand, UV, ozone) | Sets the maintenance routine and spare parts you need on hand |
| Delivery terms and last-leg access | Crane or forklift needs appear late if site access is not discussed at quotation |
| Warranty scope and spare parts supply | Pumps, controls and jets are service items; confirm what ships and how fast |
Documentation Worth Asking For
- A specification sheet for the exact model suffix, with quantities against each item.
- Base frame and shell dimension drawings, including service access points.
- An electrical schedule stating voltage, phase, circuit arrangement and the basis of the power figure.
- Packaging and container loading details, so you can compare landed cost properly between suppliers.
- The spare parts list for pumps, jets, controls and LED fittings, with part numbers.
Where the Rest of the Project Fits
Swim spas rarely sit alone. Poolside loungers, shade structures and wet-area finishes usually join the same order, and so do the bathroom ceramics, lighting and cabinetry in the rooms facing the water. As a one-stop furniture and building materials supplier, SANTERSON has supplied villas and hospitality projects since 2008, with outdoor collections, interior fixtures and building finishes coordinated under one production and shipping programme. Australian project references published on the site include villas in Sydney, Melbourne, Perth, Willoughby and North Turramurra.
If you are specifying a swim spa for a villa or a small hospitality development, send the plan, the model code you are considering and your site access notes. We will confirm the configuration, the electrical and plumbing requirements and the delivery options against those drawings, so the number in your budget is the number on the invoice.
Talk to a project specialist about swim spa configurations
Contact: PHILLIP · Phone / WhatsApp: +86-13928214007 · Email: santerson@qq.com
Enquiry response within 24 hours, Monday to Saturday, 8:00 AM–6:00 PM (GMT+8). Factory and offices in China, with additional offices in Vietnam, Singapore and South Africa.