A swim spa is easy to specify on its own and difficult to coordinate inside a package. The shell arrives from one supplier, the pool plant from another, the paving and decking from a third, and the lounging furniture from a fourth — and the junctions between them are where villa and resort budgets leak. This article uses Outdoor Swim Spa WS-PC04CH to show how one pool item is carried through a single procurement line, from setting-out dimensions to electrical confirmation and handover. The same sequence applies across the wider Swimming Pools and Swim Spas catalogue.
Why a swim spa belongs in the package, not beside it
Most project disputes around a swim spa are administrative rather than technical. The shell is dimensionally stable; what fails is the interface — who sets out the supporting slab, who confirms the power feed and where the isolator sits, who protects the acrylic surface during paving works, and who answers when a jet control board needs a spare two years after handover.
SANTERSON is a China-based furniture and building materials manufacturer working as a one-stop project furnishing supplier, with swimming pools and swim spas listed alongside outdoor furniture, bathroom fixtures, lighting, wall panelling, flooring and cabinetry. When the pool shell and the surrounding terrace items sit on one purchase order, one packing list and one shipment, the coordination burden collapses into a single production schedule and one set of site instructions.
What WS-PC04CH is, in catalogue terms
WS-PC04CH sits in the configurable outdoor swim and hydrotherapy range. The figures below are transcribed from the catalogue entry; treat them as the starting point for a configuration discussion rather than an order specification.
| Model | WS-PC04CH |
| Catalogue dimensions | 4500 × 3000 × 900 mm |
| Jet total | 46 pcs |
| Water pump / filter pump | 1 pc each |
| Control system | 1 set |
| LED lights | 1 pc |
| Total power | 2.45 kW (configuration to be confirmed) |
| Features shown | Water jets, LED lighting, Ozone |
| Swim training system | Not listed for this model |
Catalogue-listed options include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so the option list is fixed with the factory before production begins, not after.
Reading the 4500 × 3000 × 900 mm envelope into the site plan
The value of a published shell size is that it lets the design team work backwards from the pool instead of hoping the pool fits. Three decisions follow directly from those numbers:
- Structure. A 900 mm-deep basin loaded with water needs a supporting slab designed for the duty, not an extension of the terrace raft. The shell footprint sets the slab outline and any perimeter upstand before paving is drawn.
- Plant and access. The filter pump, control system and any heat pump need a location that is weather-protected yet reachable for routine service. Fix that position on the drawing at the same time as the shell, because it drives cable routes and drainage.
- Edge detail. Coping stones, decking boards and any step arrangement meet the shell at a line that must be dimensioned once. Where the paving order and the spa order come from different suppliers, this junction is usually resolved on site by whoever arrives first.
For sites where the standard footprint does not suit the terrace geometry, the range also includes a Customizable Shape Outdoor Spa, Personalized Hydrotherapy Pool, specified to the plan rather than to a catalogue box.
Configuring the jet and water-treatment package for the project type
Forty-six jets is not a marketing number; it is a hydraulic budget that has to match how the space will actually be used. Two working patterns are common in the projects we furnish:
- Villa and apartment schemes. The spa serves a small household plus guests. Jet layout is set around seated massage positions, with ozone as the baseline sanitisation route and UV added where owners want lower chemical loading.
- Boutique hospitality and resort villas. Turnover is higher and usage is less predictable, so filtration capacity, water treatment and insulation are specified for repeated daily cycling rather than weekend use. Heat pump selection follows the local water temperature and the intended season of operation.
Whichever pattern applies, the option list should be closed out against a single document signed by the specifier and the factory. That document becomes the reference for every later question about what was supplied.
The coordination sequence that keeps one line open
The workflow below is how pool items move through a package alongside the rest of the fit-out, following the stages SANTERSON's project service describes — consultation, design and planning, production, logistics, installation and after-sales.
- 1. Brief and spatial planning. Confirm location, exposure, intended use and the number of bathers. Fix the shell model or the custom shape at this stage, because later changes move the slab, not just the product code.
- 2. Specification and drawings. Issue setting-out dimensions, plant position, cable routes, drainage falls and the edge detail together with the surrounding outdoor furniture layout, so loungers, cabanas and circulation clearances are drawn against the same grid.
- 3. Production and quality control. The spa shell is built to the confirmed option list. Where other pool models are needed on the same site — for example a different footprint on each villa plot — they are produced in one batch against one schedule.
- 4. Packaging, freight and delivery. Pool items travel with the rest of the package under door-to-door delivery arrangements, so the spa does not arrive as an orphan consignment weeks before the paving crew finishes.
- 5. Installation, inspection and handover. Setting-out is checked against the issued drawing, jets and controls are commissioned, and snags are recorded before handover rather than discovered by the client in use.
What to confirm before you place the order
- Included equipment versus optional accessories for the chosen configuration, item by item.
- Total power and the electrical supply required on site, including circuit sizing and protection — confirmed against the selected configuration, not the catalogue figure alone.
- Whether a swim training system is offered for the model you are specifying; it is not listed for WS-PC04CH.
- Insulation and heat pump choice for the actual climate and operating season of the site.
- Steps, access and plant clearances needed for routine maintenance without lifting paving.
- Warranty scope, spare-parts availability and who performs commissioning on site.
Project references published on the site include villa and residential work in Willoughby, Perth, North Turramurra, Melbourne and Sydney; each case page states its own scope, so treat those as evidence of project type rather than of a standard deliverable.
If your drawings already carry a pool location, send the setting-out plan and the intended use profile to SANTERSON and we will return the matching shell option, the confirmed equipment list and the electrical requirement — so the swim spa closes out on the same purchase order as the terrace furniture, wall finishes and bathroom fixtures around it.