A laundry room drawing that shows a washer and dryer sitting inside a cabinet opening is not, on its own, an order a manufacturer can price or build. The dimension lines may stop at the carcass. The finish note may say only "to match joinery". Nobody has written down how the machines vent, how they are serviced, or whether the doors in the elevation actually clear the handles. That is where projects lose time: not in the design intent, but in the gap between the drawing and the build.
If you are specifying custom washer dryer cabinets for apartments, villas or guest suites, the brief you send determines how many rounds of clarification come back. The checklist below is the information a China-based custom manufacturer needs in the first message to return a quotation and shop drawings you can actually sign off.
Start with the machine schedule, not the cabinet elevation
Cabinet dimensions follow the appliances, so lock the machine list first. For every unit type in the project, send:
- Model number and the manufacturer's technical sheet — or, if appliances are still open, the exact internal clearances you need reserved.
- Whether the units stand side by side or stack, and whether they sit on a plinth, a pedestal or an open base.
- Water inlet, drain and power positions relative to the finished wall face and finished floor level.
- Ventilation route for dryers: rear clearance, duct size, and where the exhaust terminates.
If appliances are not yet fixed, say so plainly. A made-to-measure carcass can be built to reserved clearances, but the manufacturer needs to know that the openings are provisional rather than final.
State the environment the cabinet will live in
Laundry integration usually sits in a wet area. A bathroom or shared laundry generates sustained humidity, splashing and heat from drying cycles, and that drives board choice, edge treatment and hardware more than the finish does. Tell us:
- Room type and whether the cabinet is exposed to direct splash.
- Whether the space is ventilated, and whether it is enclosed or open to a corridor or living area.
- Which surfaces must be wipe-clean, and which are decorative only.
Our Laundry Integration range — including stacked laundry units, compact laundry solutions and laundry and storage combos — is built to project-specific dimensions with material and finish options, so the environment you describe is what shapes the specification rather than a fixed catalogue size.
Send the openings and clearances as numbers
The fastest quotations come from briefs that already answer the awkward questions. Complete this for each unit type:
| Item to specify | Why the manufacturer needs it |
|---|---|
| Rough opening width, height and depth, plus finished floor level | Carcass size, plinth height and whether the unit is built in or freestanding |
| Door swing, handle projection and traffic direction | Whether doors, pocket fronts or sliding fronts are workable at all |
| Appliance door opening arc and control panel depth | Front frames and reveals that do not foul the machine doors |
| Servicing access: rear, side or lift-out | Fixed back panels versus removable panels, and fastener type |
| Cut-out positions for taps, waste and power outlets | Notching in the carcass or worktop instead of site modifications |
| Bulkhead, skirting, cornice or tile return details | Scribing requirements and scribe-strip width |
Two items are left out of most briefs and cause the most rework: service access and door clearance. A machine that cannot be pulled forward for repair, or a cabinet door that clashes with an appliance handle once fitted, is a site problem no drawing review will catch late.
Specify the storage around the machines, not just the housing
A laundry cabinet that houses two appliances and nothing else wastes the wall. Decide before you send the brief what else the carcass must carry:
- Pull out laundry hampers — specify bay width, hamper capacity and whether the runners must carry a full load on a daily cycle.
- Multi function tall cabinets for detergents, linen and equipment — note shelf loads and whether any shelf must hold heavy items.
- A folding or ironing surface, and the load it must carry when in use.
- Basket storage: fixed shelves, pull-out drawers or open bays.
Each of these changes runner grade, shelf span and carcass depth, so they belong in the first brief rather than in an addendum after pricing.
Fix finishes and hardware with samples, not adjectives
"White gloss" means several different products. Send a finish reference — a sample code, an existing joinery line to match, or a physical swatch on file — and confirm the sheen level. Then state:
- Door construction: slab, framed or handleless profile.
- Edge treatment, especially on ends visible in a corridor.
- Hardware brand or grade, hinge type, and whether soft close is required throughout.
- Worktop material and thickness, with the sink or basin cut-out drawn.
Where cabinetry must match wardrobes or kitchen joinery in the same dwelling, send the matching reference together with the laundry dimensions. Making-to-measure across a whole apartment is simpler when all the joinery is briefed against one finish schedule.
Say how many units, where they land, and in what sequence
Custom laundry cabinetry for a residential project is normally ordered in batches by unit type or block. Tell the manufacturer:
- Quantity per unit type, and how the types map to your apartment or villa layouts.
- Delivery address or addresses, and the delivery sequence tied to site programme.
- Packaging requirements — flat-pack versus assembled carcasses — and any lift or stair constraints at the point of unloading.
For projects outside China, our team handles freight documentation and door-to-door delivery as part of the order, so it helps to know the destination port or site early. Confirm import terms, duties and transit arrangements for your own country with us directly; we do not assume one set of terms applies to every destination.
What to expect back from the manufacturer
A complete brief should return more than a price. Ask for:
- A quotation broken down by unit type, with assumed machine dimensions listed.
- Shop drawings showing carcass size, appliance clearances, cut-outs and door swings.
- A material and finish schedule matched to your reference codes.
- The points the manufacturer still needs confirmed — a good shop drawing set flags these explicitly rather than deciding silently.
Review the shop drawings against your machine technical sheets before sign-off. That single check, done once per unit type, prevents almost every laundry-cabinetry snag we see corrected after production.
Frequently asked questions
Can laundry cabinets be built if the appliances are not selected yet?
Yes. Specify internal clearances to reserve, and note in the brief that machine selection is open. Confirm final appliance sheets before production starts so cut-outs and ventilation are correct.
Should the cabinet be flat-packed or delivered assembled?
It depends on site access and installation method. Flat-pack suits tight lifts and upper floors; assembled carcasses reduce on-site work where corridors and doors allow them through.
Can laundry cabinetry match the bedroom wardrobes in the same project?
Yes, when both are briefed against one finish schedule. Send the matching reference with the laundry dimensions so door panels, edges and hardware are specified together.
Who handles ventilation for the dryer?
The project's mechanical services normally set the duct route. Send us the duct size, exhaust position and required rear clearance; we build the carcass and any rear or base panels around it.
Send your machine schedule, opening dimensions and finish references to our team and we will return a quotation and shop drawings for review. Explore the interior fixtures range to see how laundry integration sits alongside the wardrobes, tall cabinets and vanities in the same specification.