A solid colour acrylic door panel looks simple on a render, which is exactly why it is easy to specify badly. Two quotations can carry the same words — "solid colour acrylic kitchen cabinets" — and still differ in substrate, edge treatment, gloss level, carcass hardware and the point at which the measurement was taken. For buyers sourcing cabinetry for villas, apartments or hotel fit-outs, the price gap is rarely about the colour chip. Compare the six items below line by line before you award an order.

1. The panel system: door, carcass and back are three different specifications

Ask every supplier to split the quotation into door panels, cabinet boxes, shelves and back panels, with a thickness stated for each. Acrylic in this context is a surface finish on a board substrate, not the structural part of the cabinet. The box, the shelf load rating and the back panel fix the durability of the run; the door decides how it looks.

Also check what the supplier pairs with the acrylic doors. Our custom built-in kitchen cabinets are quoted as a complete system — panel material, surface finish and matching hardware such as hinges, drawer slide rails, support legs and connecting brackets — so you can see the whole build in one document instead of reconciling three separate lists.

2. Edge banding and gloss level: where a flat colour either succeeds or fails

On a solid colour panel every surface reflects light differently, so the joint between face and edge is visible. Request a written description of how door edges are finished and how the corners are handled, then ask for one full-size door sample rather than a small swatch. A4 samples hide banding lines; a full door reveals them under raking light.

Then fix the sheen in writing. The same colour can be specified as a reflective face or a low-sheen face, and they behave differently in daily use: fingerprints and dust read strongly on a mirror-like surface, while a soft-sheen face hides them but reflects less light across the room. If your layout has strong window light or downlights close to the wall cabinets, that difference is visible within weeks of handover.

If you have not settled on one sheen yet, put both through the same test — the same door, the same kitchen plan, side by side. Our high gloss acrylic cabinets and matte acrylic cabinets are both specified per project, so a comparison sample set is a normal step in the process rather than an exception.

3. Colour consistency across the whole order

A kitchen run is not one panel. Wall units, base units, tall pantry housings and any matching tall wardrobe or laundry cabinetry may be produced in separate batches, and a solid colour shows a mismatch far faster than a wood grain does. Before production, confirm three things with the supplier:

  • the reference used for approval — an approved physical sample, not a screen proof or a printed brochure page;
  • whether tall units and wall units are produced in one batch, and how any later re-order will be matched;
  • how the same colour carries across other finishes in the project, such as wardrobes and joinery in adjacent rooms.

This is where an acrylic wardrobe range supplied by the same factory helps: bedroom and hallway joinery can be matched to the kitchen colour on one approval record, instead of being coordinated between two unrelated workshops.

4. Made-to-measure versus modular: how the layout is actually priced

Modular cabinets are cheaper to quote and quicker to draw, but they force the room to accept standard widths — which usually means a filler panel at the wall, an unused gap above the wall units, or a scribe cut on site. Made-to-measure pricing looks higher per unit and is often lower for the finished kitchen, because the space is filled without offcuts and site adjustments.

Compare quotations on layout, not on metre. Ask each supplier for the same information: base unit heights and depths, wall unit heights relative to the ceiling, the pantry or appliance housing sizes, and where the fillers have been placed. Our solid color acrylic cabinets are made to measure with material and finish options selected per project, so the drawing you approve is the drawing that goes into production.

5. Hardware and opening systems, listed item by item

Hardware is where an otherwise tidy quotation becomes vague. Insist on a schedule naming hinges, soft-close mechanism, drawer runners, load rating, handle or handleless system, and any touch-to-open hardware. A flat panel door with no visible handle needs either a routed profile or a push mechanism — both are line items, and both change the cost.

Then check whether the supplier will also carry the interior fittings: pantry shelving, internal organizers, appliance housings and the plinth or leg system. When these are quoted separately by different parties, gaps appear at installation — a runner that does not match the drawer front, or a plinth finish nobody ordered.

6. Logistics, sequencing and after-sales terms

For international projects the cabinetry rarely arrives alone; it shares a container or a delivery window with flooring, wardrobes, bathroom fixtures and lighting. Ask how the supplier sequences production against your site programme, how panels are packed and labelled for installation, and what happens if one door is damaged in transit.

Get written answers on packaging and container loading, shipping documents, who handles customs clearance at destination, and which parts can be re-ordered later — a replacement door panel matched to an approved colour months after handover is a different job from the original production run. Our logistics and door-to-door delivery service covers freight forwarding, customs paperwork, packaging and container loading through to delivery at site.

A practical comparison sheet before you order

Take one page to your next three quotations and require the same fields in each: panel thickness by component; edge and corner treatment; approved colour reference and batch plan; full layout drawing with filler positions; hardware schedule with make and load rating; measurement method and who measured; packing and labelling standard; replacement-part terms. A supplier who answers all eight fields in writing is usually the one whose quotation you can compare honestly.

SANTERSON has been manufacturing furniture and building materials in China since 2008, with custom and OEM service covering design, prototyping, material selection and production coordination. Send us your kitchen layout or a supplier's specification sheet and we will quote it against these six points — contact our project team to start.