A decorative wall panel changes how a room reads the moment you walk in — but only if what arrives on site matches what the designer drew. That is where OEM sourcing earns its place. Instead of choosing from a fixed catalogue, you specify the size, surface and finish, and the factory builds to your drawings under your own brand or project label. Here is how that process runs for Decorative Wall Panel for Interior Home Decoration, stage by stage, and what to have ready before you send an enquiry.

What OEM Means Here, in Plain Terms

OEM (original equipment manufacturer) sourcing means the panels are made to your specification rather than picked off a stock list. In practice you agree on panel dimensions, surface texture, colour and packaging, and the factory produces them for your project or under your label. Our Custom & OEM Service covers custom design and prototyping, bespoke finishes and textures, OEM manufacturing, flexible minimum order quantities and brand customisation such as engraving, logos and packaging.

For wall panels this matters most where the job is not a flat rectangle: feature walls with returns, tall ceilings, arched niches, reception desks and lift lobbies all create sizes that stock boards cannot cover cleanly. Made-to-measure work removes much of the cutting waste and site improvisation that leads to rework.

Stage 1 — Brief and Drawings: What We Need From You

A usable OEM brief for wall panels usually contains:

  • Room-by-room elevations or a dimensioned layout, with the wall areas to be paneled marked out.
  • Panel size and thickness required per area, plus how joints should read (shadow gap, tight butt joint or reveal).
  • Surface direction: wood grain, stone effect, fabric-look or plain, and whether the pattern must run vertically or horizontally.
  • Where the panels are going — living room background wall, bedroom, hotel lobby, restaurant, office or showroom — because that drives the finish choice.
  • Target quantity per type, delivery destination and the installation date on site.

Send drawings even if they are rough. We support customisation on panel dimensions, colours and surface patterns, so an early sketch is more useful than a perfect one; we work back to you with a specification to confirm.

Stage 2 — Sample and Prototype Approval

Before production, the agreed surface, colour and joint detail are confirmed on a sample. This is the stage that protects you commercially: it is where you check the panel against your paint, joinery and flooring under real site lighting, and confirm the texture reads correctly at normal viewing distance.

For 3D and textured panels, ask for the sample in the orientation you intend to install. Relief patterns shift a lot once light falls across them from one side rather than another. Our Luxury Decorative 3D Wall Panel is offered with custom size, colour and pattern for exactly this reason.

Stage 3 — Specification Sheet and Quotation

Once the sample is approved, the specification is written down and priced by panel type. The sheet should leave nothing implied:

ItemWhat to lock in writing
Panel typesOne line per type, with a reference photo or sample number
DimensionsSize and thickness per type, plus tolerance for on-site trimming
SurfaceColour code or sample reference, gloss level, grain direction
QuantitiesPieces or square metres per type, with a stated spares allowance
PackagingEdge protection, carton marking by room or zone, pallet layout
Delivery termsDestination, Incoterms and packing list detail for customs clearance

A quotation that lists panel types separately, rather than one blended line, makes variations cheaper to handle later. If a wall changes size on site, only the affected type is repriced.

Stage 4 — Production and Quality Checks

Production runs against the signed specification and approved sample. As a custom furniture and interior products manufacturer, we produce panels alongside the joinery, wardrobes and cabinetry for the same project, which keeps finishes matched across the building instead of leaving you to reconcile boards from three different suppliers.

The checks worth asking for on a panel order: batch consistency of colour and texture, edge and corner condition after packing, dimensional check against the sheet, and moisture resistance where panels are going into humid interiors. Panels described as lightweight and easy to cut and install also need clean, straight edges — that is what makes site trimming predictable.

Stage 5 — Packing, Freight and Arrival

Panels are easy to damage when they are packed as an afterthought. Our logistics covers freight forwarding by sea, air and rail, packaging and container loading, customs paperwork such as commercial invoices and packing lists, shipment tracking and door-to-door delivery.

  • Mark cartons by room or zone so the fitter does not open everything to find one panel.
  • Keep the spares for each type in one clearly labelled carton — replacements after installation are harder to source.
  • Photograph the container loading and the first opened carton on arrival. It settles most damage claims quickly.

Flexible panels travel particularly well: a bendable sheet can be rolled for packing rather than shipped as rigid boards, which reduces both volume and breakage on curved walls, arches and shaped structures.

Stage 6 — Installation and Handover

Wall panels are usually installed last, after wet works have dried and the floor is protected. Give the fitter the specification sheet, not just the boxes: joint detail, grain direction and which types belong on which wall all come from that document.

Our installation and after-sales support covers on-site installation, inspection and snags, warranty coverage, spare parts or replacement and ongoing maintenance. Confirm the scope for your specific project in writing before order placement.

Choosing the Right Panel Type for the Job

ApplicationReasonable choice
Villa background wall, bedroom, living roomDecorative panel with wood, stone or fabric-effect surface, cut on site to fit returns
Hotel lobby, restaurant, showroomDurable, stain-resistant surface that wipes clean and holds up to traffic
Curved walls, arches, shaped featuresBendable mineral sheet with wood-grain surface, rolled rather than rigid
Lift lobby or reception feature3D relief panel, sized to the panel grid rather than cut around it
Acoustic-sensitive meeting roomsSanterson Acoustic Panels, specified for sound performance rather than appearance alone

Where the wall is part of a wider fit-out, Wall Panel Systems let sizing, material and layout be specified together with the surrounding joinery.

Six Questions to Ask Any OEM Panel Supplier

  • Is the price quoted per panel type, or as one blended rate for the whole wall?
  • What tolerance is built into made-to-measure sizes, and who carries it if site dimensions move?
  • Which sample was approved, and does the production batch reference that same sample number?
  • How are panels packed and labelled — by room, or mixed in shared cartons?
  • What is the spares policy once a colour or texture run ends?
  • Who installs, and what happens to a damaged panel after handover?

A supplier who answers these clearly before you order will usually deliver without drama. One who answers them vaguely is passing the risk to your site team.

Technical specifications, certifications and performance claims for wall panels should be confirmed against your project requirements before ordering. Fire rating, environmental classification and warranty terms vary by product and destination market, so request the documentation for the exact panel you are specifying.

If you have drawings ready, send them over with quantities and destination. We will come back with a specification to confirm, a sample for approval and a quotation broken down by panel type.

Contact PHILLIP — Phone / WhatsApp +86-13928214007 · Email santerson@qq.com · Contact page