A high gloss sliding door wardrobe looks decisive on a rendering and disappointing on site for the same reason: the drawing shows a finish, while the building only receives a panel, a track, a hardware set and an installation detail. If you are sourcing built-in joinery for villas, serviced apartments or guest rooms, the comparison sheet has to cover all four layers before price is discussed.
Compare five things on every quotation: what the door leaf is actually made of, which sliding system carries its weight, how the carcass is dimensioned to the room, who coordinates the wardrobe with the surrounding finishes, and what documentation travels with the container. Those five lines decide whether a glossy façade still sits flat and slides quietly two years after handover.
Start With the Door Leaf, Not the Colour
"High gloss" describes a surface, not a substrate. Two quotations can carry the same colour name and deliver completely different panels. Ask each supplier to state, in writing for every door line, the board substrate, the surfacing method and the edge treatment. Panel-based built-in joinery is made to measure, so the substrate decision also drives how the leaf behaves at cut-outs, cable ports and room corners.
Within our own catalogue these are separate collections with separate detail pages, and buyers should treat them that way when comparing offers:
- White Acrylic Wardrobes — an acrylic-surfaced door, the type usually specified for a bright, uniform reflective face.
- High Gloss Lacquer Wardrobes — a lacquered finish, specified where the colour and depth of coating matter more than a film.
- High Gloss Veneer Wardrobes — a wood veneer under a glossy coat, for projects that want grain movement rather than a solid colour.
- Two Tone Sliding Door Wardrobes — mixed door fields, used when a full-height glossy wall needs to be visually broken up.
- Mirror Sliding Door Wardrobes — mirrored door panels, where the glass specification and safety build must be confirmed before ordering.
Each of those records states the same three configuration points: made-to-measure sizing, material and finish options, and a layout tailored to the project. That is the correct baseline for a comparison — anything that cannot be sized, finished and laid out to your drawings is not really in the same category.
Match the Sliding System to the Door Weight
Glossy door leaves are heavy, and heavy leaves punish light hardware. The difference between a good and a mediocre installation is usually below the door, not on it.
| Item to compare | What a serious quotation states |
|---|---|
| Track type and load rating | Whether the leaf hangs from an upper track or runs on a lower track, and the rated load per hanger for the exact door size you specified. |
| Hangers, dampers and stops | Brand and model of rollers, soft-close or buffer devices, and end stops — plus whether replacement parts are stocked. |
| Panel height and width limits | The maximum single-leaf size the supplier will build for that finish, and how taller openings are divided. |
| Floor threshold and track detail | How the lower track meets the finished floor level, including expansion allowance and cleaning access. |
| Wall interface | Whether side panels, scribes and a face frame are included to absorb out-of-plumb walls on site. |
Our wardrobe listings do not publish hardware part numbers or maximum leaf dimensions, because those depend on the size and finish selected. We ask for the opening dimensions first and confirm the hardware set with the quotation. Any supplier who quotes a sliding system before seeing the wall elevations is guessing.
Compare How the Carcass Is Dimensioned to the Room
A sliding wardrobe fails most often at the junctions: with the ceiling, with an out-of-plumb wall, with skirting, with a light recess. Compare how each offer resolves those junctions.
- Does the quotation include a site survey or dimension verification, and who is responsible for it?
- Is the carcass built to the measured structural opening, or does it assume a nominal finished floor and ceiling level?
- Are internal fittings — rails, shelves, drawers, lighting provisions — itemised per bay rather than sold as a bundle?
- For an awkward plan, is a Sliding Door Corner Wardrobe solution offered, and how is the corner access actually achieved?
- Where the brief needs a wall-wide system instead of a wardrobe box, are closet sliding panels quoted as a separate scope with their own hardware?
Ask for the shop drawings before you place the order, and check that your interior consultant's elevations and the joinery drawings agree on door count, opening direction and handle provision. Reconciling those two documents is cheaper than a site rework.
Check Finish Consistency Across the Whole Order
Gloss shows mismatch. When a bedroom joinery package is split between suppliers — wardrobe from one, vanity and media unit from another — the sheen level, colour batch and edge banding will not match, and no amount of site correction fixes it.
This is the practical argument for consolidating built-in joinery with a one-stop furniture and building materials supplier. Under one production scope, carcass board, door finish, edge treatment and ironmongery come from the same batch and are packed as one set. Our custom and OEM service covers bespoke finishes and textures alongside manufacturing, so a colour or grain specified for the wardrobe can be carried through to the rest of the room's joinery.
Quoted Totals Are Not Comparable Line for Line
Two offers for "4.2 m of sliding wardrobe" can differ by a wide margin because they contain different things. Before you compare totals, put both quotations into the same structure:
- Carcass and internal fittings, listed per bay.
- Door leaves with the stated finish and the hardware set that carries them.
- Delivery to site — door-to-door freight, customs paperwork and packaging are part of the landed cost, not an optional extra.
- Installation and snagging scope, including who corrects wall levels.
- Spares and after-sales terms for the hardware specifically, since rollers and buffers are the wear items.
A quotation that lists only "wardrobe, high gloss, 4.2 m" hides most of the risk in one line. Ask for the breakdown, then compare like with like.
Documents That Should Travel With the Goods
For an international order, the paperwork determines whether the shipment clears and whether the site team can assemble without guessing. Confirm in advance that you will receive packing lists matched to room or bay numbers, assembly drawings for each wardrobe type, hardware specification sheets with part names for future replacement, and the shipping documents your customs broker requires. Marking crates by room reference sounds minor on paper and becomes decisive when a crew unloads several bedroom sets at once.
A Short Comparison Sheet to Send With Your RFQ
Send the same six questions to every supplier and the differences appear in the first round of replies:
- Which substrate, surfacing method and edge treatment sit behind the specified gloss colour?
- Which sliding system, with which load rating, carries a leaf of the exact height and width required?
- Is site dimension verification included, and at what stage does it happen?
- Are internal fittings itemised per bay rather than bundled?
- What is included in landed cost and installation scope at your project location?
- Which hardware spares are available after handover, and how are they ordered?
If you are specifying built-in joinery for a villa or guest-room package, send us the room elevations and the finish you want to match. We quote High Gloss Sliding Door Wardrobes as made-to-measure units, with the sliding system, internal layout and delivery scope confirmed against your drawings rather than a generic price list. Our turnkey project solutions cover design coordination, production, logistics and installation support through one contract.
Dimensions, finish systems and hardware selections are confirmed for each project before production. Contact SANTERSON to discuss your joinery package.