The Outdoor Swim Spa WS-PC05ST-S is listed in our catalogue with fixed shell dimensions of 5000 × 2400 × 1470 mm and a set of standard features: water jets, LED lighting, ozone sanitisation and a swim training system. What is not fixed is everything around that base specification. Two buyers ordering the same model code can end up with very different installations, because pumps, heating, filtration, controls and site preparation are all decided in the quotation stage rather than in the catalogue.

For procurement teams, design consultants and villa owners, the useful question is which decisions have to be closed out before an order is placed. The sections below follow the order in which a swim spa specification is normally confirmed on a project.

1. Confirm the shell fits the slab before discussing options

Catalogue dimensions are the starting point, not the final footprint. Before any accessory discussion, establish the clear space available on site, including access routes for delivery and craning or placement, the load rating of the slab or deck, and the working clearance needed for later maintenance on the pump and filter area. Where the spa sits close to a boundary wall, a glazed facade or an existing pool plant room, that clearance should be measured against the finished shell size rather than the catalogue figure.

The same model code is also offered in sibling configurations with different equipment packages, so compare WS-PC05ST and WS-PC05ST-L against the WS-PC05ST-S line by line rather than assuming a shared specification. Where an alternative shell shape or footprint is needed, our Customizable Shape Outdoor Spa route covers personalised hydrotherapy pools built to a project layout.

2. Water pump and swim training performance

The catalogue record for this model lists the control system, swim training system, filter pump, jet count, LED lights and total power, while the water pump is not listed as a fixed line item. That is exactly the kind of gap that should be closed in writing during specification: state which pump or pumps drive the swim current, at what flow rate, and how many nozzles deliver it. A swim training system specified for gentle counter-current swimming and one specified for lap training are not interchangeable, and the difference shows up in jet layout and power draw rather than in marketing copy.

Ask for the equipment schedule of the proposed configuration — pump rating, filter pump, jet count and jet types, and total connected load — and check that figure against your electrical design. Total power shown in the catalogue is a configuration figure, and adding a heat pump or an additional pump changes it.

3. Heating and insulation for the actual climate

Heat pumps and insulation are listed options rather than standard inclusions. Whether to take them depends on where the spa is installed and how many months a year it will be used at temperature. For a project in a cool or windy exposed location, insulation and a cover matter as much as heater capacity, because running cost is driven by heat loss from the water surface more than by the shell wall.

Confirm three points on this line: the heater type offered for this model, the insulation package included in the quoted price, and the duty you are buying to — year-round outdoor use, seasonal use, or hydrotherapy sessions on demand. A quotation that says only "heat pump included" has not answered the question.

4. Water treatment: ozone plus what else

Ozone is shown as a standard feature on this model. UV sterilisation and sand filtration appear in our optional-accessories list, and availability varies by model. For a shared or high-frequency installation — a villa used by guests, a boutique hotel, a gym — discuss the full treatment train rather than a single device: sanitisation method, filtration media and micron rating, dosing arrangement if any, and how the maintenance cycle is carried out. The access panel size that looks acceptable on a drawing becomes obvious once someone has to change a filter cartridge in practice.

5. Controls, lighting and user interface

One control set and four LED lights are listed for this configuration. Decide who operates the system day to day: a facilities manager, a housekeeping team, or an owner. That answer drives whether you want simple on/off zone control, saved temperature set points, or schedules that let the spa come up to temperature before guests arrive. Confirm the controller's mounting location, whether it is indoor or weather-rated, and how fault indications are presented, because a controller buried behind plant pipework will not get used.

6. Steps, seating and jet layout

Steps are an option on this range, and entry arrangement should be settled early since it interacts with the deck level and with accessibility requirements. The same applies to jet placement: six jets can be arranged for a seated hydrotherapy position or spread along the swimming lane, and the choice changes what the product is actually used for. Send us your intended use pattern — rehabilitation, relaxation, daily training — and we will map the jet layout to it.

7. Electrical supply and site services

Confirm included equipment and electrical requirements for the selected configuration before your electrician finalises the circuit. Supply voltage, phase, breaker rating, cable size, protective device selection and the local wiring rules are all site-side items, and they depend on the finished equipment schedule rather than the catalogue page. Where a heat pump is added, revisit the supply calculation at that point. Drainage, water fill and any overflow arrangement should appear on the same drawing set as the spa footprint.

8. Delivery, packaging and installation sequence

For an imported unit the handover sequence matters more than buyers usually expect. Our logistics and door-to-door delivery service covers freight forwarding, packaging and container loading, customs documentation and tracking, so the receiving side needs a date, access for the delivery vehicle, and lifting arrangements agreed in advance. Decide who sets the unit, who connects services, and who commissions it, and put those responsibilities in the same document as the purchase order.

SANTERSON works as a one-stop furniture and building materials supplier, so a swim spa is usually ordered alongside poolside loungers, outdoor dining sets, pergolas and the adjacent interior fit-out. Coordinating those items on one production and shipping schedule removes several separate deliveries, and our turnkey project solutions cover design coordination through installation for villa and hospitality projects.

A short checklist to send with your enquiry

  • Site photos, the measured clear space, slab or deck load capacity, and access route for delivery and placement
  • Intended use pattern: training, rehabilitation, guest use, or mixed
  • Climate and months of use, so heating and insulation can be specified rather than guessed
  • Local supply voltage and phase, plus the electrical designer's contact
  • Water treatment preference and who performs routine maintenance
  • Entry arrangement, deck finish level, drainage and overflow arrangement
  • Required delivery window, port of entry, and who handles local import clearance

Send those seven items with your enquiry and the quotation can be issued against a defined configuration instead of a base model. Where a project needs a different footprint or finish, our custom and OEM service covers bespoke sizing, material finishes and private labelling for dealers and developers.

To confirm the equipment schedule, options and lead time for WS-PC05ST-S on a specific project, contact SANTERSON — phone / WhatsApp +86-13928214007 (PHILLIP), email santerson@qq.com.