A single wardrobe line rarely travels alone on a villa or apartment fit-out. The bedroom joinery schedule usually pulls in the entry storage wall, the sideboard, the vanity and sometimes the kitchen cabinetry as well. When those items are quoted separately, the same decision gets made four or five times, and the differences between them show up later as variation orders. This guide walks through how we budget and scope Classic Paneled Solid Wood Wardrobes alongside the rest of a multi-product package, so the numbers you approve at tender stage are the numbers you pay at handover.
Start with the schedule, not the product page
Before any price is discussed, list every fixed and loose item that touches a bedroom wall: wardrobes, bedside returns, skirting, architraves, door linings, wall panelling and any integrated lighting. A classic paneled door is a repeated frame-and-panel construction, so the profile of its stiles and rails has to match whatever profile appears on the internal doors and on the entry cabinetry in the same dwelling. Decide that once, at the schedule level, and every subsequent line item inherits it instead of being re-specified from scratch.
Group the items by what they share rather than by room. Items sharing a paint colour or a stain recipe can be produced in one batch; items sharing a hardware family can be ordered together; items sharing an installation visit can be fitted in one mobilisation. That grouping is where most of the saving actually sits.
The five cost drivers we price first
1. Timber and panel construction. A raised or recessed panel door uses more machining than a flat slab, and the profile tooling is set up per run. If one bedroom asks for a deep routed profile and another for a shallow one, both setups are charged. We recommend fixing one paneled profile across a dwelling and letting colour do the differentiation.
2. Made-to-measure dimensions. Our solid wood wardrobe lines, including Oak Solid Wood Wardrobes and the walnut and mahogany variants in the same collection, are built to project dimensions rather than to a fixed modular grid. Non-standard heights to a raked ceiling, returns around a structural column or an integrated bay-window seat all change panel counts and carcass detailing. Send us the survey early: it is cheaper to price a dimension than to rebuild a door.
3. Interior layout and hardware. The carcass is only part of the number. Hanging rails, pull-out drawers, mirrored panels, soft-close fittings, integrated lighting and drawer dividers each carry their own unit rate. We price these as a visible list, so you can decide where to spend and where to standardise instead of guessing what sits inside a single lump figure.
4. Finish schedule. Painted paneled doors need a finish that survives bedroom use while hiding joint lines. Where the same colour is specified across wardrobes, doors and panelling, one recipe covers all three; where it differs, each variant needs its own approval sample.
5. Packaging and freight split. Tall paneled doors are the most fragile items in a joinery shipment. They travel differently from flat-pack carcass panels, so they affect how a container is loaded and how many crates are needed. We plan the loading with the rest of the package rather than shipping wardrobes as a separate consignment.
How we scope it against other products in one package
For whole-house work we treat the wardrobe schedule as one line inside a single one-stop furniture and building materials supplier package. In a recent mid-century modern whole-house project, the same warm timber palette ran through the entry cabinet with open display niches, the floating living room sideboard with a travertine countertop, the integrated bay-window cabinet and bed platform, and the bathroom barn door — all specified against one finish schedule and coordinated in one production run. That is the model we apply to paneled bedroom joinery as well: one drawing set, one approval cycle, one shipment.
Because our custom furniture design and prototyping service covers bespoke material finishes and textures, the paneled door can be carried through in solid timber, veneer or lacquered substrates depending on the budget line it sits in. The visual language stays intact while the specification moves between price tiers.
A worked scoping sequence
Step 1 — survey and mark-up. Send room dimensions, ceiling heights, structural obstructions and floor finishes. We return marked-up elevations showing where the wardrobe runs start and stop.
Step 2 — layout sign-off. Confirm the interior configuration for each unit: rail heights, drawer banks, mirror positions, lighting circuits. This is the stage where budgets move most.
Step 3 — finish approval. One sample per colour and per substrate in the schedule, approved once and applied to every matching item across the package.
Step 4 — consolidated quotation. Each product line is priced separately but shown against one total, so you can see exactly what a change to one unit does to the package figure.
Step 5 — production, packing list and delivery. Items are produced together, crated by installation sequence and delivered to site with the documentation your customs broker needs.
Where budgets slip, and how we close it off
Three items cause most of the slippage on paneled joinery. Site dimensions taken before floor screed or skirting is fixed come back wrong. Finish samples approved verbally rather than in writing get re-made. And services — lighting drivers, sockets behind a carcass — are located after the panels are cut. We close each of these with written confirmations at the four gates above, and we flag any item that cannot be produced to the drawing before production starts rather than after.
If you are assembling a multi-product package and want the wardrobe line priced against the rest of it, send us your schedule and drawings. We will return marked-up elevations, an itemised quotation and a finish schedule you can hold every supplier to.