A quotation for custom furniture or building materials is only as good as the numbers behind it. When drawings, dimensions and finish notes arrive together, the factory can price the job honestly, flag clashes early and start production without another round of emails. Below is the input pack that makes an enquiry quotable on the first pass, and what each item actually decides.

Why a complete measurement pack changes the price, not just the timeline

Custom joinery, loose furniture and architectural finishes are made to order. Panel sizes, hardware sets, packaging volume and even the container plan all follow from the same measurements. An incomplete brief does not only delay a quote — it produces a quote that has to be revised later. As a one-stop furniture and building materials supplier working on villa, hotel and office projects, we would rather close a gap in the brief at enquiry stage than re-cut panels after the first production drawing is issued.

Two rules cover most of it. Every dimension should be traceable to a drawing or a site check, and every finish choice should be written next to the item it applies to. Where a number is still provisional, mark it as provisional instead of leaving it out.

Measurements for built-in joinery: wardrobes, kitchens, wall panelling

For anything fixed to the structure, send room-by-room dimensions rather than one combined floor plan. These sheets feed both the layout proposal and the shop drawings under our interior design services, which cover space planning, production coordination and on-site guidance.

Input to provideWhat it decides
Wall-to-wall width and depth measured at several heights, not one average figureCarcase widths, scribe and filler panels, whether a long run can be levelled
Floor-to-ceiling height, plus the build-up of a finished floor that is not yet laidFull-height door heights, toe-kick detail, plinth height, door swing clearance
Centres and heights of outlets, switches, downlights and existing pipeworkCut-out positions, appliance housings, whether a service void is required
Window head, sill and reveal depths; door opening widths and lining thicknessesArch and niche proportions, apron panels, where a run has to stop
Plumb and square readings on long wallsWhether the scribe is designed into the panel or trimmed on site
Clear aisle in front of the run, including traffic routes and adjacent doorsHinged, sliding or pocket fronts; handleless reveal depth
Appliance make and model, or the envelope you intend to buyTall housing dimensions, ventilation gaps, integrated door weights
Storage programme: hanging heights, drawer counts, shelf loads, display itemsInternal configuration and hardware grade, not only external size

For a whole-house package, list rooms in build order. Our arched niche and full house custom wall cabinet project began from room dimensions and a storage wish-list; the arch radius, LED niche positions and the flush wardrobe line were set against those measurements before any panel was cut.

Measurements for loose furniture and outdoor sets

Loose pieces need fewer numbers, but the ones that matter describe the space around them rather than the piece itself.

  • Layout dimensions — the area the set must occupy and the seat count you expect. The polycarbonate hardtop outdoor swing bench comes in two seating sizes, so clear footprint picks the model.
  • Access route — lift car size, stair width, gate height. This decides whether a frame ships assembled, flat-packed or knocked down.
  • Exposure notes — shade hours, salt air, pool chemicals, wind on a canopy or hardtop. These drive frame finish and cushion fabric rather than size.
  • Stacking and storage — whether seating must stack or nest between events, which changes frame geometry.

Measurements for bathrooms: sanitaryware, showers, wet areas

Bathroom specification goes wrong at rough-in, not at appearance. For each fixture send the waste and water outlet positions, measured from the finished wall face, and the height of any boxing or recess.

  • Waste type and rough-in — state whether the site has a floor drain or a wall drain before we quote a WC; several models in our range support both trap arrangements with different offsets.
  • Cold and hot outlet centres and heights, plus pressure and flow at the fixture where known, which governs valve and rainfall head selection.
  • Finished floor levels and waterproofing upstands for showers, wet rooms and any spa base.
  • Clear wall length behind a basin or vanity, since freestanding basins are restrained through a back panel and need a suitable wall build-up.
  • Base, plant space, power supply and lifting route for water features — the catalog dimensions of our outdoor swim spa WS-S06 describe the shell only; confirm included equipment and electrical requirements with your engineer for the configuration selected.

Measurements for ceilings, cladding and flooring

For aluminium ceiling panels and wall cladding, include a reflected ceiling plan or setting-out drawing with grid sizes, suspension type and the clear height required below services. For cladding, give panel module sizes, the fixing substrate, and edge and corner details. For engineered wood flooring, give areas by zone, plank format and laying direction, subfloor type and moisture readings.

Send quantities as a take-off with the drawing reference for each area. A take-off that matches the setting-out lets us check panel counts, order the correct trims and profiles, and split shipments by zone so installers are not held up by one missing carton.

Inputs that are not dimensions but move the price just as much

  • Project type, room schedule and target handover date, including any phased release of rooms or floors.
  • Finish schedule: panel material, surface type, colour reference (sample code, RAL, or a photo with the reference written on it) and sheen level.
  • Hardware preference — hinge and slide grade, handled or handleless fronts, integrated cabinet lighting.
  • Quantity per item plus a spares allowance for hospitality work.
  • Delivery destination and terms, with site access for unloading.
  • Whether the design repeats across units; repetition is where custom furniture manufacturing earns its cost back through repeatability.

What happens to the pack once it is sent

With measurements and finish notes in hand, we return layout proposals and 3D renderings for approval, then shop drawings carrying the final dimensions for sign-off. Production starts on confirmation. The packing list follows from the approved drawing set, which is what logistics and door-to-door delivery are planned around, and the job closes with snagging under installation and after-sales support.

A four-question test before you send an enquiry

For every built-in item on your schedule: can you name its width, depth and height, the wall or floor it fixes to, the services that pass through it, and the finish reference? A missing answer in any of those four is the gap most likely to turn into a change order.

Note: dimensions shown on product pages are catalog values for the stated configuration. Check them against current technical data for the model and finish you order, and have your engineer verify structural, waterproofing and electrical requirements for the site.

Send your measurement pack for a quotation

Plans, room schedules and finish notes can be sent to PHILLIP by phone or WhatsApp on +86-13928214007, or by email to santerson@qq.com. The contact page lists enquiries answered within 24 hours (Monday to Saturday, GMT+8). Project scope can start from the turnkey interior project solutions page or the contact page.