Two tone melamine wardrobes look identical in a catalogue photograph and behave very differently on site. One set closes flush and keeps its panel lines; the other arrives with mismatched edge banding, doors that rub, or carcasses that do not line up with an out-of-plumb villa wall. The difference is rarely the board. It is the manufacturer behind it. If you are sourcing built-in joinery for villas, apartments or hospitality rooms, this is the shortlist process we recommend before a single sample is ordered.

Start with scope, not samples

Before you contact anyone, write down what the project actually needs. Wardrobes are usually part of a larger joinery package: vanities, kitchen cabinetry, media walls, doors and wall panelling. A supplier who can produce all of it from one set of drawings saves you matching finishes across workshops later.

Record the following for each bedroom or unit type:

  • Room dimensions, wall conditions and whether the wardrobe is recessed, floor-to-ceiling or free-standing
  • Door type — hinged, sliding, pocket or open — because it changes clearances, hardware and price
  • Interior layout: hanging heights, drawers, shelving, lighting, and any niche or corner detail
  • The two colour fields you want, and which surfaces carry each one (door face, carcass, handles, interior)
  • Quantities by unit type, delivery destination and the site sequence you need them in

Suppliers answer enquiries faster and more accurately when this information arrives in one message. It also makes quotations comparable, which is the entire point of a shortlist.

Screen for genuine made-to-measure capability

Many workshops describe themselves as custom but only offer a fixed modular grid. Ask directly whether dimensions, finish and layout are specified per project, or whether you are choosing from pre-set widths. A real made-to-measure manufacturer will ask for your drawings; a modular trader will send you a price list.

For Two Tone Melamine Wardrobes, the specification conversation should cover made-to-measure sizing, material and finish options, and a layout tailored to each project. If a supplier cannot discuss all three, they are quoting a product, not building your joinery.

Then check how the two-tone effect is actually produced. Ask which decorative foil or laminate is used for each colour field, whether door faces and carcass panels come from the same batch, and how the transition between the two tones is finished at the edge. Answers here reveal more about factory discipline than any showroom photograph.

Judge finish quality by four details

Request a door sample, or a small carcass corner, from every shortlisted supplier and compare them side by side:

  • Edge banding. Run a fingernail along the joint. A visible seam, glue line or colour shift at the edge is the most common failure point on melamine panels in transport and on site.
  • Panel flatness. Lay the sample on a flat surface and check the corners. Warped door faces show up as gaps once installed at height.
  • Colour match across surfaces. Compare the door face with the carcass edge and the interior panel under both daylight and warm artificial light — two tones only read as intentional when each tone is consistent.
  • Hardware and drilling. Look at hinge boring, drawer runner fixings and handle alignment. Clean, repeatable drilling indicates CNC discipline rather than hand finishing.

Keep the approved sample. It becomes your reference for inspection on delivery, and it settles any dispute about what was agreed.

Check production capacity and project history

Ask how many units of your type they have shipped to your destination market, and whether they can show a project of similar scale. Villa and apartment fit-outs fail most often at coordination, not manufacturing: panels from different batches, missing handles, or doors that arrive before the site is ready for them.

SANTERSON has operated as a China-based manufacturer and one-stop supplier of furniture and building materials since 2008, supplying project customers in hospitality, villas and offices. Published project references include villa fit-outs in Willoughby, Perth, North Turramurra, Melbourne and Sydney, where cabinetry and joinery were delivered alongside other fixtures rather than as an isolated order. That model matters for wardrobe sourcing: your joinery, vanities, doors and wall panelling come from one production plan and one shipment.

Ask any shortlisted supplier three practical questions:

  • Who draws up the production drawings, and when do you approve them before manufacturing starts?
  • How are units labelled, packed and sequenced so each bedroom can be assembled in order on site?
  • What happens if a panel is damaged in transit — replacement part, replacement panel, or replacement set?

Vague answers to those three questions predict exactly the problems that appear at handover.

Compare quotations on the same basis

Never compare headline prices. Rebuild each quotation against the same checklist so you can see what is missing:

  • Panel specification and finish for every component, including carcass and interior
  • Hardware brand and model for hinges, runners, handles and any integrated lighting
  • Whether drawings, prototyping and sample approval are included or charged separately
  • Packing method, container loading plan, freight terms and the delivery point covered
  • What is excluded — site preparation, electrical connection, plinth or scribe work

A supplier offering Turnkey Villa Furnishing will normally bundle design coordination, production, logistics and installation into one scope. A cabinet-only quotation looks cheaper until you price the joiner, freight forwarder and coordinator you now have to hire yourself.

Test after-sales before you commit

Ask who handles snags once the wardrobes are on site, how replacement parts are produced and shipped, and what warranty terms apply to panels, edges and hardware. Get it in writing against the approved sample. If a supplier is reluctant to define this before an order, that reluctance is your answer.

A five-step shortlist you can run this week

  1. Send your dimension sheet and layout to five suppliers; keep only those who respond with questions about the project rather than a price list.
  2. Request door samples from the three who remain, and inspect edge banding, flatness, colour match and drilling.
  3. Ask for a comparable project reference at your destination and confirm made-to-measure sizing, finish options and layout are all negotiable.
  4. Rebuild quotations against the checklist above so exclusions become visible.
  5. Confirm drawing approval, packing sequence, spare-part handling and warranty in writing before you place the order.

Two tone melamine wardrobes reward a slow supplier selection and punish a fast one. Shortlist on process evidence — drawings, samples, project history and after-sales terms — and the finished joinery tends to match the drawing rather than the photograph.

Discuss your wardrobe layout, finishes and quantities with our team at SANTERSON contact, and we will return production drawings and a comparable quotation for your project.