A swim spa sits between the pool and the spa in a project budget, which is exactly why enquiries for it stall. The design brief says "outdoor swim spa near the pool deck", the procurement team sends that one line to three suppliers, and each of them quotes a different shell, a different pump set and a different scope of works. The model we cover here, Outdoor Swim Spa WS-S12, is a long configurable unit in our swim and hydrotherapy range, and it shows what has to be settled before a quotation means anything.
This article walks through the enquiry package we would need in order to price the unit properly for a villa, resort or residential development, and what you should expect back from any supplier you approach.
1. What your design brief already answers
Most briefs contain more usable information than buyers realise. Before writing to a supplier, pull these items out of the drawings and mark the gaps:
- The setting. Is the unit recessed into a deck, partly sunken, or sitting above finished floor on a plinth? A flush installation changes the access detail for plant, drainage and steps, and it is quoted differently from an above-ground placement.
- Available length and clear width. The WS-S12 is catalogued at 11740 × 2200 × 1470 mm, so a site that cannot hand over roughly that envelope plus working clearance around it needs a shorter model from the range rather than a modified shell.
- Intended use. Daily lap training, guest hydrotherapy at a small hotel, or occasional resort use all point to different jet and water-treatment choices.
- Who operates it. A facilities team with a maintenance schedule is a different buyer from a private owner who wants the least possible routine work.
- Delivery route. Port of entry, site access for an oversize load, and crane or forklift availability all belong in the first enquiry, not in month three.
2. The specification questions that decide the quotation
For this model the catalogue lists a control system of 1 set, 2 water pumps, 1 filter pump, a jet total of 73 pieces, LED lighting with additional small LED lights, and a total power figure of 7.65 kW. Treat those as reference values for the standard configuration and confirm them against your selected build; equipment count and electrical load move with options, so we restate the final numbers on the quotation rather than relying on the catalogue line.
The features shown for this model are water jets, LED lighting and ozone. A closely related variant in the same size also lists a swim training system, so if your brief calls for counter-current swimming against a fixed flow, say so explicitly in the enquiry. That single sentence changes which configuration we price, and it is one of the most common sources of mismatch between two quotations that appear to be for "the same 12-metre spa".
Catalogue-listed options include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so list the ones you want by name in the enquiry instead of asking for "a full option package". For a heated outdoor unit in a cooler climate, the heat pump and insulation together drive both the running load and the delivered price far more than the cosmetic selections do.
3. Send the drawings, not just the mood board
The enquiry becomes actionable when it carries a dimensioned site plan showing the spa envelope against the deck edge, the plant or equipment zone, and the power and drainage points as currently designed. With that, we can flag conflicts before production instead of after delivery. Three details are worth confirming on your side before you send anything:
- Structure and loading. A water volume of this size is a permanent load; the deck framing and any suspended slab need to be checked by your engineer, not by the spa supplier.
- Electrical supply. Confirm what supply is available at the intended point and share it with us. The installed power for the selected configuration has to match what your electrician can provide, including protection and isolation.
- Water and drainage. Fill source, overflow route, and drain location should be on the drawing you send. If the site relies on rainwater or a bore, mention it, because water treatment specification follows water quality.
If your project also needs the surrounding terrace furnished, that is worth raising in the same enquiry. Our outdoor furniture collections — aluminium frames, rope weave, wicker, teak and teak-look tops — are produced alongside the building finishes used on the same project, so a single package keeps material palettes consistent across the pool deck.
4. What a serious supplier returns
Compare replies on scope, not on headline price. A usable quotation for this kind of unit states the model and configuration line by line, lists pumps, jets, lighting and treatment equipment actually included, gives the shell dimensions with tolerances, states what is excluded, and explains how the unit reaches your site. Where a supplier offers more than one build for the same footprint, they should show you the difference rather than leave you to discover it at handover.
We work as a furniture and building materials manufacturer running design consultation, production, packing and container loading, shipping documentation and door-to-door delivery under one contract, which is how a swim spa gets coordinated with the cabinetry, wall panelling, lighting and outdoor furniture around it instead of arriving as an unrelated package on a separate delivery date. Our custom and OEM service covers bespoke finishes and configurations where the project requires them; confirm current options and minimum order quantities for your specific build, since these vary by product.
5. A short checklist for the enquiry email
- Model or footprint you are asking about, plus whether a swim training system is required.
- Dimensioned site plan with deck levels, plant zone and clearances.
- Installation type: recessed, semi-recessed or above ground.
- Climate and season of use, so heating and insulation can be sized sensibly.
- Available electrical supply at the intended point.
- Country of delivery, port, and site access constraints.
- Whether other fit-out items — outdoor furniture, bathrooms, kitchen cabinetry, wall and ceiling finishes — should be quoted in the same package.
Send that and you will receive comparable quotations from different suppliers, which is the only way to judge value on a project of this size. If you are specifying the WS-S12 or working out which length in the range fits your site, send us the drawings and we will come back with a configuration and a scope you can compare.